Benutzeranleitung / Produktwartung D5RH des Produzenten Xantech
Zur Seite of 32
08905153B - 1 - INSTALLATION INSTRUCTIONS D5RH DIGI-5 DDS Digital Distribution System Rack Mount 4 Source, 4 Zone Hub.
08905153B - 2 - Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRI C SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
08905153B - 3 - Damage Requiring Service — These appliances should be serviced by qualified service person nel when: • A power supply connection or a plug has be en dam aged or • If liquid has b.
08905153B - 4 - 1. Introduction Modern Convenience The D5RH 4 Source, 4 Zone Digital Audio Distri bution Hub with DIGI-5 Technology and related products from Xantech provides the ability to listen to 4 different audio sources in up to 28 separate zones of the home, all over CAT-5 wiring for total flexibility and convenience.
08905153B - 5 - Features • 4 Source, 4 Zone Capacity • Expandable up to 28 Zones with Optional D5XH Digital Audio Distribution Expansion Hub • End-to-End Digital Architecture for Crystal Clear S.
08905153B - 6 - Defining Terms Zone A Zone is defined as an area of the house that has separate source selectio n capabilities from all other areas of the house.
08905153B - 7 - Rear Panel The Rear Panel of the D5RH has connections for Po wer, Source Inputs, Zone Outputs, IR Outputs, Page/Doorbell Trigger Input, Auxiliary Power, USB and Expansion capabilities as well as Digital/Analog Source Select ion, Source Input Gain and Zone Pairing DIP Switches.
08905153B - 8 - 2. System Design Overview/Applications Planning Before installing the D5RH, it is essential to have a detailed and accurate system design. The first step to a good design is to map the system. It is adv isable to mark up a copy of the house floor plan with speaker, keypad and equipment lo cations, etc.
08905153B - 9 - Pre-Construction In a pre-construction installation, walls and ceilings are open with no drywall installed. This is desirable and allows the installer greater access than in retro-fit applic ations.
08905153B - 10 - Pre-Wiring D5RH Digital Audio Distribution Hu b to D5KP Amplifier Key pad The D5RH and all associated components are wired using CAT-5 terminated to the T-568A Wiring Standard (Figure 2.2). When pre-wiri ng, run lengths of CAT-5 from the pre-determined equipment location (the “head-end”) to each Amplifier Keypad lo cation.
08905153B - 11 - Applications There are three typical system applications when installing the D5RH. These options can be combined throughout a system depending on the design of the system: 1 Basic 4 S.
08905153B - 12 - Basic 4 Zone, 4 Source Sy stem w/ Local Sour ces Local Sources Connect ed Using DH IP Loca l Source Wall Plates Figure 2.4 shows a basic D5RH syst em with four sources and four zones with the addition of Local Sources in two of the zones.
08905153B - 13 - Expanded 4 Source, 8-28 Zone System D5XH Expansi on Router Figure 2.5 shows an expanded system with four sources and ten zones with the addition of Local Sources in four of the zones.
08905153B - 14 - 3. Connections The D5RH is part of an integrat ed system that requires the use of other comp onents. Depending on the system design, thes e components may include: • D5KP Amplified .
08905153B - 15 - Digital Coaxial (DIG COAX) Use a Digital Coaxial cable to connect an audio s ource with a Digital Coaxial output to the D5RH’s Source Input as shown in Figure 3.2. NOTE: Make sure to put the COAX/OPT switch in the COAX (up) position.
08905153B - 16 - Source Loop Outputs (SOURCE LOOP OUT) The Source Loop Outputs are used only when adding D5 XH Expansion Hubs to the D5RH in order to create more than four zones.
08905153B - 17 - D5-NET This connector is reserved for future implement ation of two-way data sources and communication. EXPANSION OUT Connect the CAT-5 Patch Cable fr om the D5RH ‘EXPANSION OUT’ port to the D5XH ‘EXPANSION IN’ port as shown.
08905153B - 18 - IR OUT/ALL IR OUT Xantech D5KP Amplified Keyp ad feature a built-in IR Receiver t hat is used to control the sources connected to the D5RH using hand-hel d remotes.
08905153B - 19 - ZONE OUT The ‘ZONE OUT’ RJ-45 connector’s interface wit h D5KP Amplified Keypad through CAT-5 cables wired to the T-568A Standard. These connectors carr y IR information from the keypad as well as audio information to the D5KP Amplifier Keypad.
08905153B - 20 - D5KP Speaker Connections The D5RH routes digital audio to connected D5 KP Amplifier Keypad where the audio is then amplified and sent to in-room speakers. WARNING!: The D5KP’s amplifier is capable of powering a single pair of 8-6 Ohm spe akers.
08905153B - 21 - Auxiliary Power Connector (AUX POWER OUT) For wire runs over 150’, it is recommended to run an additional 16 AWG/2-conductor wire from the head-end location to the Amplified Keypad locations. This will allow the AUX POWER OUT terminals to supply additional power to the Amplifier Keypads to compensate for the additional distance.
08905153B - 22 - USB Port (USB IN) The USB IN port is designed to allow upgrades to the D5RH’s firmware. AC Power Connector Connect the supplied cord from the AC Power Connec tor into a properly grounded electrical outlet. RS232 Port Connect RS232 port to an external controller.
08905153B - 23 - D5IP Source Input Wall Plate A D5IP Source Input Wall Plate is required to add a Local Source to a zone. The wall plate has audio and IR connections similar to the SOURCE INPUT of the D5RH. A run of CAT-5 terminated to T- 568A standard (see Figure 2.
08905153B - 24 - Figure 3.10 to Figure 3.12: Local Source to D5IP Connections NOTE: Multi-channel digital audio form ats (5.1, 7.1 e tc.) ar e not supported by the D5IP and D5RH. Howev er, many audio/video sources allow you to chang e the digital output to PCM Stereo.
08905153B - 25 - IR OUT Connect a standard IR Emitter (283D em itter, for example) from the IR OUT port on the front of the D5IP to the IR receiver on the front of the audio source (see Figure 3.14). For sources that have an IR Input port on the back of the unit, use a 3.
08905153B - 26 - Adding Zones – D5XH Digi tal Audio Distribution Hub A basic D5RH system can contain a maximum of four sources and four zones. By adding D5XH Digital Audio Distribution Expansion Hub, the system can contain a maximum of twenty-eight zones.
08905153B - 27 - Connections between a D5RH chassis and D5XH Digita l Audio Distribution Hub involve CAT-5 patch cables routed between the units. A ll cables are included with the D5XH.
08905153B - 28 - 4. Settings & Operation DIP Switch Settings There are two groups of DIP swit ches on the rear panel of the D5 RH that must be set prior to operation: • SOURCE INPUT GAIN • KEY.
08905153B - 29 - 5. Troubleshooting Table 5-1 provides troubleshooting information fo r the D5RH Digital A udio Distribution Hub. Audio Symptom Possible Cause Solution No audio present in a specific zone 1. Source not playing Press Play, turn ON, etc.
08905153B - 30 - Appendix A: Specifications Power Input 120 VAC / 3 Amps (Export 240VAC models also available) Sampling Frequency 48kHz Digital Audio Resolution 24 Bit Signal to Noise Ratio 94dB Input GAIN Switches (Input Sensitivity) DIP Switch 3 & 4 UP 1.
08905153B - 31 - Xantech Limited Warranty (Effective for products sold after July 1, 2006) Xantech Corporation (“Xa ntech”) warrants to the holder of a valid proof of purcha se as the first end-us.
08905153B - 32 - Xantech Corporation 13100 Telfair Ave. 2F, Sylmar CA 91342 | Xantech.com Installation Instructions, D5RH © 2008 Xantech Corporation Document # 08905153B This document is copyright protected. No part of this manual ma y be copied or reproduced in any form without prior writt en cons ent from Xantech Corporation.
Ein wichtiger Punkt beim Kauf des Geräts Xantech D5RH (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Xantech D5RH noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Xantech D5RH - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Xantech D5RH reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Xantech D5RH erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Xantech D5RH besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Xantech D5RH verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Xantech D5RH. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Xantech D5RH gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
