Benutzeranleitung / Produktwartung ms616st des Produzenten BenQ
Zur Seite of 58
MS616ST/MX618ST Digital Pr ojector User Manual.
Table of contents 2 Ta b l e o f c o n t e n t s Important safety instructions ........................... 3 Introduction .......................... 7 Projector featu res .......... ........... ............ .... 7 Shipping content s ................. .
Important safety inst ructions 3 Impor tant safety instructions Y our projector is designed and tested to meet the latest st andards for safety of information technology equipment. Howev er , to ensur e safe use of this product, it is important that you follow the instructions mentioned in th is manual and marked o n the pr oduct.
Important safety inst ructions 4 Safety Instructions (Continued) 7. The lamp becomes ex tremel y hot during operation. Allow the pr ojector to cool for appro xima tely 45 minutes prior to removing t he lamp assembly for r eplacement. 8. Do not operate lamps bey ond the rated lamp life.
Important safety inst ructions 5 Safety Instructi ons (Continued) 13. Do not place this projector in an y of the following envir onments. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance fr om walls and free flow of air aroun d the projector .
Important safety inst ructions 6 Safety Instructi ons (Continued) 17. Do not step on the projector or place any objects upon it. Besides pr obable ph ysical damage to the projector , doing so ma y result in accident s and possible injur y . 18. Do not place liquids near or on the projector .
Introduc tion 7 Intr oduction Pr ojector featur es The pr ojector offers the follo wing featur es • SmartEco™ star ts y our dynamic po wer sa ving The SmartEco™ technology offers a new way of operating the projector lamp system and sa ves lamp pow er up to 70% depend ing on the content brightness le vel.
Introduction 8 Shipping contents Carefull y unpack and verify that y ou hav e all of the items shown belo w . If any of these items are missing, please contact y our place of purchase. Standard accessories The supp lied accesso ries will be s uitable fo r your region, and ma y differ from those illustrated.
Introduc tion 9 Pr ojector exterior view 1. External contr ol panel (See "Contr ols and funct ions" on page 10 for details.) 2. Lamp cov er 3. V ent (heated air exhaust) 4. Quick-release button 5. Lens cap 6. Focus and Zoom ring 7. V ent (cool air intak e) 8.
Introduction 10 Contr ols and functions Pr o jector 1. F ocus ring Adjusts the focus of the pr ojected image. 2. Zoom ring Adjusts the size of the image . 3. T op IR remote sens or 4. MENU/EXIT T urns on the On-Screen Displa y (OSD) menu. Goes back to pr evious OSD menu, exits and sa ves menu se ttings.
Introduc tion 11 Remote contr ol 1. POWER T oggles the projector between standb y mode and on. 2. Info Shows the status information of the projector . 3. MENU/EXIT T urns on the On-Screen Displa y (OSD) menu. Goes back to previous OSD menu, exits and sa ves menu se ttings.
Introduction 12 Remote contr ol effective range The remote control m ust be held at an angle within 30 degr ees perpendicul ar to the projector's IR r emote control sensor(s) to function corre ctly . The distance between the remote contr ol and the sensor(s) should not exceed 8 meters (~ 26 feet).
Positioning your project or 13 P ositioning y our pr ojector Choosing a location Y our projector is designed to be installed in one of four possible in stallation loca tions: Y our room la yout or personal prefer ence will dictate which installation location you select.
Positioning your project or 14 Obtaining a pr eferr ed projected image size The distance from the pr ojector lens to the screen, the zoom setting, and the video format each factors in the p rojected image size.
Connection 15 Connection When connecting a sig nal sour ce to the projector , be sure to: 1. T urn all equipment off befor e making any connections . 2.
Connection 16 • If you wish to use this connection method when the proje ctor is in standby mode, make sur e the Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu.
Operation 17 Operation Star ting up the pr ojector 1. Plug the power cor d into the projector and into a powe r outlet. T urn on the power outlet switch (where fitted). Check that the PO WER in dicator light on t he projector lights orange after power has been applied.
Operat ion 18 Adjusting the pr ojected image Adjusting the pr ojection angle The pr ojector is equipped with 1 quick-release adjuster f oot and 1 rear adjuster foot. These adjusters change the image hei ght and projection angle. T o adjust the projector: 1.
Operation 19 Corr ecting k eystone K eystoning ref ers to the situation w here the projected imag e is noticeabl y wider at either the top or bottom. It occurs when the pr o j ector is not perpendicular to the screen. T o correct this, you will need to manually corr ect it following ONE of these steps.
Operat ion 20 Using the menus The projector is equipp ed with On-Scr een Displa y (OSD) menus for making various adjustment s and settings. The OSD screenshots below are f or refer ence on ly , and ma y differ from the actual design. Below is the ov erview of the OSD menu.
Operation 21 Securing the pr ojector Using a security cable lock The projector has to be installed in a safe pl ace to prev ent theft. Otherwise , purchase a lock, such as the K ensington lock, to secure the projector . Y ou can locate a K ensington lock slot on the rear side of the pr ojector .
Operat ion 22 the passw o rd r ecall procedure. See "Entering the passw ord recall pr ocedure" on page 22 for details. If you enter an incorr ect pa ssw o rd 5 times in succession, the projector will automatically shut down in a short time. Entering the passw ord re call pr ocedure 1.
Operation 23 Press to highlight Power On Lock and press / to select Off . Y ou will not ha ve to enter the passw ord next time when turning on the pr ojector . ii. If the password is incorr ect, the password err or message appears lasting for three seconds, and the message “INPUT P ASS W ORD” appea rs for your retry .
Operat ion 24 Magnifying and sear ching for details If you need to find th e details on the projected pictur e , magnify the pictur e. Use the direction arr ow ke ys for navigating the pictur e . • Using the remote control 1. Press Digital Z oom+/- to display the Zoom bar .
Operation 25 About the aspect ratio • In the pictures below , the black portions are inac tive ar eas and the white por tions are activ e areas. • OSD menus can be displayed on those unused black areas. 1. Auto : Scales an image proportionally to fit the projector's nativ e resolution in its horizontal or vertical width.
Operat ion 26 Optimizing the image Using W all Color In the situation wher e you ar e projecting on to a co lored surface such as a painted wall which ma y not be white, the W all Color featur e can help correct the pr ojected picture’ s colors to pre vent possible color difference betw een the sour ce and projected pictur es.
Operation 27 6. Press to select a men u item to b e ch anged and adjust the value with / . See "Fine-tuning the image quality in user modes" below for details. Fine-tuning the image quality in user modes According to the detected signal type and selected pictur e mo de, some of the below functions ma y not be available.
Operat ion 28 temperature”. A white color with a low color temperature appears to be reddish white. A white color with a high color temperature appe ars to ha ve mor e blue in it.
Operation 29 6. Press to highlight Gain and adjust its values to your prefer ence by pressing / . The contrast level of the primar y color you select will be affected. Every adjustment made will reflect to the image immediately . 7. Repeat steps 3 to 6 for other color adjustments.
Operat ion 30 2. Highlight Ye s and pr ess MODE/ENTER to confirm. Y o u will see the message “ Timer is Off ” displaying on the scr een. Remote paging operations Connect the pr ojector to your PC or notebook with a USB cable prior to using the paging function.
Operation 31 Hiding the image In order to dra w the audience's full attention to the pr esenter , you can use ECO BLANK on the projector or r emote control to hide the screen image. When this function is activated with an audio input connected, the audio can still be heard.
Operat ion 32 1. Press MENU/EXIT and then press / until the SY STEM SETUP: Advanced menu is highlighted. 2. Press to highlight High Altitude Mod e and press / select On .
Operation 33 Using the test pattern The projector is able to displa y the grid test pattern. It helps you adjust the image size and focus and check that the pr ojected image is free from distortion. T o display the test pattern, open the OSD menu and go to t he SYSTEM SETUP: Advanced > Test Pattern and press / to select On .
Operat ion 34 Using the teaching templates The pr ojector provides sev eral preset patterns for various teaching purposes . T o activate the pattern: 1. Open the OSD menu and go to the DISPLAY > Teaching Temp late and press / to select Blackboard or Wh iteboard .
Operation 35 Pr esenting fr om a USB Reader This featur e displa ys a slide show of images stor ed on a USB flash drive connected to the projector . It can eliminate the need for a computer source. Suppor ted image formats: • A square box will displa y on the fi lename for unident ified ch aracters.
Operat ion 36 Shutting down the pr ojector 1. Pr ess POWER and a confirmation message will appear prompting you. If you don't respond in a f ew seconds, the message will disappear .
Operation 37 Menu operation Menu system Please note that the on-screen displa y (OSD) menus var y according to the signal type selected and the projector model y ou are usin g.
Operat ion 38 Main menu Sub-menu Options 4. SYSTEM SETUP: Basic Presentation Timer Timer Period 1~240 minutes Timer Display Alwa ys/3 min/2 min/1 min/ Ne ver Timer Position T op-Left/Bottom-Left/T op-.
Operation 39 Note that the menu items ar e available when th e projector detects at least one valid signal. If there is no equipment connected to the pr ojector or no signal detected, limited menu items are accessible.
Operat ion 40 Description of each menu Function Description Wall Color Corre cts the pr ojected picture’ s color when the projection s urface is not white. See "Using W all Color" on page 26 for details. Aspect Ratio There are sev e ral options to set the image's aspect ratio depending on your input signal source.
Operation 41 Function Description 3D Sync Invert When you discov er the inversion of the image depth, enable this function to correct the problem. Teaching Template See "Using the teaching templa tes" on page 34 for details.
Operat ion 42 Function Description Quick Auto Search See "Switching input signal" on page 23 for details. Color Spac e Conversion See "Changing Color Space " on page 23 for details. Presentation Timer Reminds the presenter to fi nish the presentation within a certain time frame.
Operation 43 Function Description Splash Screen Allows you to select which logo screen will display during pr ojector start-up. Auto Blank S ee "Hiding the image" on page 31 for details. Quick Cooling Enables or disables the Quic k Cooling function.
Operat ion 44 Function Description Closed Caption Closed Caption Enable Activates th e function by selecting On when the selected input signal carries closed captions.
Maintenance 45 Maintenance Car e of the projector Y our projector needs little maintenance. The on ly thing y ou need to do on a regular basis is to keep th e lens and case clean. Nev e r r emove an y parts of the projector except the lamp . Contact your dealer if other parts need replacing.
Maintenance 46 Lamp information Getting to know the lamp hour When the projector is in operation, the durati on (in hours) of lamp usage is automatically calculated by the built-in timer . See "Setting Lamp Mode as Economic or SmartEco " below fo r more info rmation on Economic mode .
Maintenance 47 Timing of r eplacing the lamp When the Lamp indicat o r lights up r ed or a message appears suggesti ng it is time to replace the lamp , please install a new lamp or consult your dealer . An old lamp may cause a malfunction in the pr ojector and in some instances the lamp may explode .
Maintenance 48 Replacing the lamp • T o reduce the ri sk of electrical shock, alwa ys turn the projector off and disconnect the power cor d before changing the l amp. • T o reduce the risk of sev ere burns, allow the projector to cool for at least 45 minutes bef ore r eplacing the lamp.
Maintenance 49 12. Connect the pow er and restart the pr ojector . Do not turn the power on with the lamp cover r emoved. 6. Use the handle to slow ly pull the lamp out of the projector . • Pulling it too quickly ma y cause the lamp t o break a nd scatter brok en glass in the projector .
Maintenance 50 Resetting the lamp time r 13. After the startup logo , open the On-Sc reen Displa y (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settin gs menu. Pr ess MODE/ENTER . The Lamp Settin gs page appears. Highlight Reset Lamp Timer .
Maintenance 51 Indicators Light Status & Description Po w e r e v e n t s Orange Off Off Stand-by mode. Green Flashing Off Off Pow e ring up . Green Off Off Normal operation.
Troubleshooting 52 T r oubleshooting The projector does not turn on. No picture Blurr ed image Remote contr ol does not work The passw ord is incorrect Cause Remedy There is n o pow er from the p owe r cord. Plug the po wer cor d into the A C pow er jack on the pro jector , and plug the po wer cord into th e power outlet.
Specificatio ns 53 Specifications Pr ojector specifications All specifications ar e subject to change without notice . Optical Resolution 800 x 600 SVGA (MS616ST) 1024 x 768 XGA (MX6 18ST) Display system 1-CHIP DMD Lens F/Number F = 2.6 ~ 2.78, f = 10.
Specifications 54 Dimensions 312 mm (W) x 104 mm (H) x 244 mm (D) Ceiling mount installation 312 244 104 51 58 Ceiling Mount scr ew: M4 x 8 (Max L = 8 mm) Unit: mm.
Specificatio ns 55 Timing char t Suppor ted timing for PC input • *Supported timing for 3D signal with Frame Sequential , and Top Bottom form at. **Suppor ted timing fo r 3D signal with Frame Sequential for mat. ***Supported timing for 3D signal with Top Bottom fo rma t.
Specifications 56 • The timings showing above ma y not be suppor ted due to EDID file and V GA graphic card limitations. It is possible that some timings cannot be chosen. Suppor ted timing for HDMI (HDCP) input • *Supported timing for 3D signal with Frame Sequential , and Top Bottom form at.
Specificatio ns 57 • The timings showing above ma y not be suppor ted due to EDID file and V GA graphic card limitations. It is possible that some timings cannot be chosen.
Warranty and Co pyright informati on 58 W arranty and Cop yright information Limited warranty BenQ warrants this pr oduct against any de fects in material an d workman ship , under normal usage and storag e. Proof of pur chase date will be required with an y warranty claim.
Ein wichtiger Punkt beim Kauf des Geräts BenQ ms616st (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie BenQ ms616st noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für BenQ ms616st - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von BenQ ms616st reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über BenQ ms616st erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon BenQ ms616st besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von BenQ ms616st verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit BenQ ms616st. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei BenQ ms616st gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
