Benutzeranleitung / Produktwartung RS373PXW des Produzenten Whirlpool
Zur Seite of 40
Use & Care Guide Optional coil element surface unit module Oven vent Downdraft Grill n...Am.lr porcelain-enamel reflector bowl - :;;;I Panel % indicator ____, light - - Broil element & Anti-ti.
Contents Page lmoortant Safetv Instructions 3 Us’ing Your Range .......................... 6 Using the surface units .................. 6 Using the coil element module .. .6 Using the solid element module .7 Using the ceramic glass cooktop module ..
Important Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: l Read all instructions before using the range. l Install or locate the range only in accordance with the provided Installation Instructions.
Important Safety Instructions Continued l Turn pan hand!es inward, but not over other surface units. This will help reduce the chance of burns, igniting of flammable materials, and spills due to bumping of the pan. l Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam.
l Do not store things children might l Do not clean door heat seal. It is want above the range. Children essential for a good seal. Care could be burned or injured while should be taken not to rub, climbing on it.
Using Your Range Surface unit drill S&face unit marker indicator light Using the surface units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HIGH and OFF. Surface unit and grill markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Burn and Product Damage Hazard l If the pan is too small for the surface unit, you could be burned by the heat from the exposed section of the surface unit. Use correctly sized cooking utensils to prevent injury. l If a coil surface unit stays red for a long time, the bottom of the pan is not flat enough or is too small for the surface unit.
Using Your Range Continued Using the ceramic glass cooktop module Cooking on the optional ceramic glass cooktop module is almost the same as cooking on surface units. There are, however, a few differences: l The glass will take longer to heat up than a regular surface unit.
Using the grill Before you use the grill for the first time: Wash with warm soapy water, rinse and dry. Never use a metal scrubbing pad or abrasive cleanser on the grill; these will damage the non-stick surface. After cleaning, lightly wipe cooking surface with cooking oil to prevent food from sticking.
Using Your Range Continued Grill chart Preheat 10 minutes on HIGH for best flavor. Beei steak l rare 9 medium Lobster tails Turn as needed for even cooklng.
Using the vent system “‘: Using the cooktop’s built-in downdraft vent fan removes cooking vapors, odor and smoke. The fan will always come on at LOW speed when the grill module is in use, but may be manually switched to HIGH. The fan cannot be turned off when the grill module is operating.
Using Your Range Continued To replace modules: 1. Line up module terminal with cooktop receptacle. 2. Push terminal into receptacle until it is plugged in. 3. Use the handle to lower the front of the module. Setting the electronic clock The electronic clock is a digital clock with a Minute Timer and automatic control cooking cycle.
3. The display will show the set time, then return to time-of-day. 4. To see the remaining set time before the set time is up, press the Minute Timer button. To cancel the Minute Timer: Push the Minute Timer button, followed by the Up or Down buttons until “0:OO” shows on the display.
Using Your Range Continued Broiling 1. Position the rack before turning the oven on. See a reliable cookbook for recommended rack positions and broiling times. 2. Put the broiler pan and food on the rack. 3. Close the door to the Broil Stop position (open about 4 inches, 10.
Usina the Cook Timer The auTomatic Cook Timer is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven such as meats and casseroles. Do not use the automatic cycle for cakes, cookies, etc.
Using Your Range Continued Push the Up button to set the desired stop time. AUTO will appear on the display and the OVEN Indicator Light will come on to signal the start of the cooking cycle.
5. 6. Push the Cook Time button. “0:OO” will appear on the display. Push the Up button to set the desired length of baking time. For example, to delay time bake for 3 hours press and hold the Up button until “3:OO” appears on the display. Push the Stop Time button.
Using Your Range Continued 10. After bakina is done or to stoD the oven bgfore preset time, ’ push the Cancel/Clock button and turn both the Oven Selector and the Oven Temperature Control to OFF.
The oven vent Oven vent Hot air and moisture escape from the oven through a vent located at the back of the cooktop. Do not block the vent. Poor baking can result. Burn Hazard When the oven is ON, pans and pan handles left near the oven vent can become hot enough to burn the user and to melt plastics.
Using Your Range Continued Drawer slide rail - Literature 20 The storage drawer The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti-tip bracket(s).
Caring For Your Range Burn and Electrical Shock Hazard Make sure all controls are off and the range is cool before cleaning. Failure to do so can result in burns or electrical shock. Control panel and knobs 1. Turn control knobs to the OFF position. 2.
Caring For Your Range Continued 3. Lift out the reflector bowl. See “Cleaning tips” on page 34 for cleaning instructions. Replacing Burn, Electrical Shock and Fire Hazard l Make sure all surface units are OFF before replacing surface units and reflector bowls.
Solid element surface units Burn and Electrical Shock Hazard Make sure all surface units are OFF and cool before cleaning them. Failure to do so can result in burns or electrical shock. 1. For best results, wipe off surface units with a damp soft cloth and soapy water after each use.
Caring For Your Range Continued 3. The stainless steel trim rings will yellow from the heat of the surface units and pans. This is normal. The yellowing can be removed by using stainless steel cleaner or Cooktop Polishing Creme on the trim rings. To obtain order information for Cook- top Polishing Creme (Part No.
Cleaning tips l Light soils - Remove with a clean, _’ -. Personal Injury Hazard *Allow surface unit and surround ing area to reduce in tempera- ture from hot to warm before removing heavy or sugary spills Wear protective clothing such a! oven mitts.
Caring For Your Range Continued Grill Food cooked on the grill may spatter. All parts of the module except the heating element should be cleaned after each use. A soiled heating element cleans itself by burning off spills and spatters. Burn and Electrical Shock Hazard Make sure grill is OFF and cool before cleaning.
4. Lift and remove the grease well and grease pan, being careful not to spill fat drippings. Wash grill sections with warm, soapy water and a non-abrasive plastic scrubbing pad. Rinse and wipe dry. Do not use metal scrubbing pads or abrasive cleansers.
Caring For Your Range Continued Vencover Filler 5. Replace the vent cover. 1. Remove the vent cover and wash in warm, soapy water or wipe with a damp cloth. Do not use metal scrubbing pads or abrasive cleansers. Lift up vent filter, which is directly below vent cover.
Using the Self-Cleaning cycle T;e Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Hand clean frame I Hand clean door around edge Do not hand clean seal Before you start Clean the areas shown by hand.
Caring For Your Range Continued Personal Injury and Product Damage Hazard l Do not touch the oven during the Self-Cleaning cycle. It could burn you. . Do not use commercial oven cleaners in your oven. Cleaners may produce hazardous fumes or damage the porcelain finish.
4. Push the Stop Time button. 5. Push the Up button to set the desired stop time. The OVEN Indicator Light will come on immedi- ately. The CLEAN Indicator Light will come on when the oven temperature exceeds normal baking tempera- tures. The door can’t be opened when the CLEAN Indicator Light is on.
Caring For Your Range Continued 1. Cleaning cycle with a stop time of 5:00 would begin at 2:O0.) When the desired start time of the Self- Cleaning cycle is reached the OVEN Indicator Light will come on. The CLEAN Indicator Light will come on when the oven temperature exceeds normal baking temperatures.
Speciai tips l Keep the kitchen well-ventilated during the Self-Cleaning cycle to help get rid of heat, odors and smoke. . Clean the oven before it gets heavily soiled.
Caring For Your Range Continued Cleaning tips Control knobs Clean with warm soapy water and a soft cloth. l Wash, rinse and dry well. 9 Do not soak. Control panel Clean with warm soapy water or spray glass cleaner and a soft cloth. l Wash, rinse and dry well.
Grill Clean grill with warm soapy water and a non-abrasive plastic scrubbing pad. l Wash, rinse and dry. . Do not use metal scouring pads or harsh cleansers. Do not clean heating element under grill. l Soil burns off. l Do not put in water. Clean splatter shield with warm soapy water and a soft cloth.
Caring For Your Range Continued The oven light The oven light will come on when you push the Oven Light Switch on the control panel. Push the switch again to turn off the light. Electrical Shock and Personal Injury Hazard l Make sure oven and light bulb are cool and power to the oven has been turned OFF before replacing the light bulb.
If You Need Service Or Assistance... We suggest you follow these steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix without tools of any kind. If nothing operates: l Is the power supply cord plugged into a live circuit with the proper voltage? (See Installation Instructions.
If You Need Service Or Assistance Continued 2. If you need assistance*... Call Whirlpool COOL-LINE” service assistance telephone number. Dial free from anywhere in the U.
39.
WHIRLPOOL Electric Cooking Product Warranty ER004 LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR FSP” replacement pans and repair labor to correct WARRANTY defects in materials or workmanship. Service must From Date of Purchase be provided by an authorized WhirlpoolSM service company.
Ein wichtiger Punkt beim Kauf des Geräts Whirlpool RS373PXW (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Whirlpool RS373PXW noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Whirlpool RS373PXW - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Whirlpool RS373PXW reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Whirlpool RS373PXW erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Whirlpool RS373PXW besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Whirlpool RS373PXW verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Whirlpool RS373PXW. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Whirlpool RS373PXW gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
