Benutzeranleitung / Produktwartung Vector 955 des Produzenten Beltronics
Zur Seite of 31
DIGITAL RADAR • LASER • SAFETY DETECTOR Owner’s Manual.
The Bel V955 is the most advanced radar, laser and safety detector ever designed by Beltronics. The Bel V955 includes full X, K, SuperWide Ka, and Safety Warning System radar capability, front and rea.
Quick Reference Card 1 Programming Details Factory Default Settings To reset your V955 to its original factory settings, press and hold the “CITY ” and “BRT” buttons while turning the power on. The V955’s display will provide a “Reset” message, accompanied by an audible alert, acknowledging the reset.
2 Quick Reference Card BEL V955 Quick Reference Card * Factory Default Settings Remove card along perforations Remove card along perforations Press the RVW button to go from one catego.
T able of Contents Quick Reference Guide 4-5 Installation 6-7 • Power Connection 6 • Mounting Location 6 • Windshield Mount 7 Controls and Features 8- 1 0 • Power and Volume Control 8 • Powe.
Quick Reference Guide To begin using your V955, just follow these simple steps 1 Plug the small end of the power cord into the side jack of the detector, and plug the large end of the power cord into your car’s lighter socket. 2 Mount your V955 on the windshield using the supplied windshield mount.
Radar Antenna and Laser Lens The rear panel of your V955 should have a clear view of the road ahead. For best performance, do not mount the V955 directly behind windshield wipers or tinted areas. Page 6 Alphanumeric Matrix Display Your V955’s display will show Highway, AutoScan, or City as its power-on indication.
Power Connection To power your V955, plug the small end of the power cord, (telephone-type connector) into the modular jack on the V955’s right side, and plug the lighter plug adapter into your vehicle’s lighter socket or accessory socket. Your V955 operates on 12 volts DC negative ground only.
Windshield QuickMount The V955’s QuickMount bracket is designed for unobtrusive and hassle-free mounting. 1 Depress the QuickMount button on the top of the V955 (by the word BELTRONICS) and slide th.
Controls and Features Power To turn your V955 on or off, press the PWR button located on the top. When you turn your V955 on, it goes through a sequence of alerts. If you prefer, you may program your V955 for a shorter power-on sequence. See the Programming section for details.
Highway / AutoScan / City Button The City button selects the V955’s sensi- tivity mode. We recommend the AutoScan mode for most driving. Your V955’s AutoScan mode provides long-range warning, with minimum false alarms.
Controls and Features 10 Power Connector The V955’s power jack uses a telephone- type connector. This 4-conductor connector only works with the included power cord, optional direct-wire, or SmartPlug cord. For more information or to order, call us toll-free at 1-800-341-2288.
11 Programming There are 6 user-selectable options so you can customize your V955 for your own preferences. The buttons labeled CITY and BRT are also used to enter the Program Mode, REVIEW your current program settings, and to CHANGE any settings as desired.
12 Over view of Programming Pilot HWY Pilot H Voice ON Voice OFF PwrOn STD PwrOn FST aMute ON aMute OFF City STD City LoX City NoX Bands DFT Bands MOD POP ON or OFF (default is off) SWS ON or OFF (def.
13 Details of Programming Pilot (Power-on indication) Note: When you are using the Dark mode, the display will only show HD, AD, or CD, (Highway-Dark, AutoScan-Dark, or City- Dark). Pilot HWY (Full description) In this setting, your V955 will display “Highway,” “City,” or “AutoScan” as its power-on indication.
14 City Mode Sensitivity City STD (Standard) In this setting, when you put your V955 in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors.
15 Features and Specifications Operating Bands • X-band 10.525 GHz ± 25 MHz • K-band 24.150 GHz ± 100 MHz • Ka-band 34.700 GHz ± 1300 MHz • Laser 904nm, 33 MHz bandwidth Radar Receiver / D.
16 T echnical Details Interpreting Alerts Although the V955 has a comprehensive warning system and this handbook is as complete as we can make it, only experience will teach you what to expect from your V955 and how to interpret what it tells you.
17 Explanation You are approaching a radar unit concealed by a hill or an obstructed curve. A patrol car is traveling in front of you with a radar source aimed forward. Because signals are sometimes reflected off of large objects and sometimes not, the alerts may seem inconsistent.
18 T echnical Details How Radar W orks Traffic radar, which consists of microwaves, travels in straight lines and is easily reflected by objects such as cars, trucks, even guardrails and overpasses. Radar works by directing its microwave beam down the road.
19 How Laser (Lidar) W orks Laser speed detection is actually LIDAR (Light Detection and Ranging). LIDAR guns project a beam of invisible infrared light. The signal is a series of very short infrared light energy pulses, which move, in a straight line, reflecting off your car and returning to the gun.
20 T echnical Details How Safety Radar W orks Safety Warning System, or SWS, uses a modified K-band radar signal. The SWS safety radar system has 64 possible messages (60 currently allocated). The SWS messages your V955 can display are listed on the facing page.
21 SWS T ext Messages Highway Construction or Maintenance 1 Work Zone Ahead 2 Road Closed Ahead/Follow Detour 3 Bridge Closed Ahead/Follow Detour 4 Highway Work Crews Ahead 5 Utility Work Crews Ahead .
22 T roubleshooting Problem The V955 beeps briefly at the same location every day, but no radar source is in sight. The V955 does not seem sensitive to radar or laser. The V955 did not alert when a police car was in view. The V955 did not provide a Safety signal while within range of an emergency vehicle.
23 Problem The V955 will not turn on. The V955 feels very warm. Solution • Check that the power is ON. • Check that vehicle ignition is ON. • Check that vehicle lighter socket is functional. • Try the V955 in another vehicle. • It is normal for the V955 to feel warm.
24 Ser vice Service Procedure If your V955 ever needs service, please follow these simple steps: 1 Check the troubleshooting section of this manual. It may have a solution to your problem. 2 Call us at 1-800-341-2288. We may be able to solve your problem over the phone.
25 Wa rranty and Accessories BEL TRONICS One Y ear Limited W arranty What this warranty covers: BELTRONICS warrants your Product against all defects in materials and workmanship.
26 DIGITAL RADAR • LASER • SAFETY DETECTOR VECTO R.
27 R egist er onli ne : @ www . beltronics .co m BEL TRONICS PRODUCT REGISTRA TION CARD If you purchased your detector directly from BELTRONICS, you do not need to fill this out. If you did not purchase your detector directly from BELTRONICS, please fill out this section and return to us, or register online at our web address: www.
28 Remove card along perforations A TTN CUST OMER SER VICE BEL TRONICS INC 5442 WEST CHESTER RD WEST CHESTER OH 45069-9789.
Beltronics 5442 West Chester Road West Chester OH 45069 USA USA 800-341-2288 Canada 800-268-3994 www.beltronics.com ©2005 Beltronics Made In Canada Features, specifications and prices subject to change without notice.
Ein wichtiger Punkt beim Kauf des Geräts Beltronics Vector 955 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Beltronics Vector 955 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Beltronics Vector 955 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Beltronics Vector 955 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Beltronics Vector 955 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Beltronics Vector 955 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Beltronics Vector 955 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Beltronics Vector 955. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Beltronics Vector 955 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
