Benutzeranleitung / Produktwartung E936CS des Produzenten Beltronics
Zur Seite of 24
with 65 Digital V oice Messages and Digital Display Operating instructions f or model E936CS TM Ultimate Performance. Proven T echnology. P R O T E C T I O N P R O T E C T I O N 360˚.
Thank you for purchasing an EXPRESS 936 Radar/Laser/Safety detector . EXPRESS 936 offers the most advanced technology available for detecting all Radar and Laser speed monitoring devices. In addition, EXPRESS 936 features Digital V oice, Text Message Display and the Safety Wa r ning System ® with 60 Digital V oice messages.
3 Profile of Features ➤ page 4 Description of Features ➤ page 5 Power Up Test Sequence ➤ page 5 T utorial Mode ➤ page 5 Memory Retention of Feature Selections ➤ page 6 Adjusting the Audio Le.
1. P / V (Power/V olume) Button: pressing P / V briefly will tur n the unit ON . Pressing P / V a second time will bypass the power up test sequence. Pressing P / V and holding will change the audio level. 2. T ext Message Display: communicates all mode selections (i.
7. Laser Optical Sensors: collect Laser signals from in front and behind. 8. Audio Alert Speaker: all audible alerts and Digital V oice Messages are emitted from this location. 9. Power Jack: using the straight or coiled cord, EXPRESS 936 operates in any vehicle with a 13.
sample alerts) press CTY or AUD to move forward or backward through the alerts. During sws ™ sample alerts press CTY to move forward in the sws ™ message list. “ MSG 1 ”will appear initially in the display confirming your selecion. Pressing the AUD button allows you to listen to the sws ™ message while viewing it in the display.
7 AUD (Audio Mute) Button Continuous Audio Alert Patter n Y our unit has been preset at the factory to provide an X, K, Ka or Laser audio alert and Digital V oice announcement of the signal detected. Digital V oice prompts are provided once after the initial audio alert.
CTY (City X/Highway) Button The CTY X mode has been designed to ef fectively reduce unwanted audio alerts caused by intrusion alarms, door openers, and other devices which share X band with police Radar—without reducing sensitivity.
Reset to Factory Settings Y ou can reset your unit to factory settings for volume, DRK , AUD , CTY and Selectable Features. With the unit OFF , press and hold CTY button, then press AUD and P / V buttons simultaneously. The display will briefly show “ RESET ” and provide two “beeps”.
display and a short audible “beep” will sound indicating you are now in the Selectable Features Mode. 2. Immediately after the “beep”, the display will show the status of the sws ™ Selectable Feature: “ SWS on ” or “ SWS off ”. Press the AUD button to select ON or OFF for this feature.
To achieve optimum per formance,regardless of which mounting position you choose, follow the basic steps on the following page: 1. Consider occupant safety when selecting a mounting location. Choose a location where the unit will not be hazardous in case of an accident.
4. Slide the detector onto the mounting bracket until it “locks” into place. 5. T o adjust the angle of the bracket, squeeze and hold the circular “buttons” on the sides of the bracket; this will allow you to angle the bracket to your windshield.
Note—the tip is in two pieces; be careful not to lose either piece or the spring inside the holder . (See diagram on page 13). Three Radar Frequencies Three microwave frequencies have been allocated by the FCC (Federal Communications Commission) and are used for traffic Radar: X, K and Super Wideband Ka.
INTERPRET A TION OF ALER TS Radar Alerts The alerts provided by your unit are affected both by the type of transmission (continuous wave or instant-on), and the position of the Radar source.
15 2. Stationary Radar aimed around a cor ner Under this circumstance, reaction time is considerably reduced. Since the Radar signals are transmitted across your line of travel, there is generally no signal available to receive until you are relatively close to the source.
4 . Moving Radar behind you, traveling in the same direction. Police Radar signals transmitted from behind your vehicle can be received when reflected by objects in front of you such as large signs, bridges and trucks.
Laser Alerts When Laser is detected, the display will flash “ LASER ” coupled with a distinct Laser audio alert. If a vehicle is a long distance from the source of Laser pulses, fewer pulses will generally be received.
Message which is repeated twice. After the Digital V oice, the unit will continue to present the message and provide the “clicking” tone for as long as an sws ™ signal is detected. Y ou can replay the last sws ™ message received by pressing the DRK button within 30 seconds of receiving an sws ™ alert.
19 Conditions that Affect Radar Alerts If you feel your unit is not alerting properly, keep in mind that there are many conditions that influence the intensity or duration of an alert: 1. The police are using instant-on/pulsed Radar , in which case no signal is transmitted until visual contact has been made with your vehicle.
TROUBLESHOOTING Solutions for Common Problems If your unit is not operating properly, please refer to the outline below. If you experience a problem with your unit that is not covered in this outline please call, Monday to Friday, 9 AM -5 PM EST , for assistance: 1-8OO-341-2288 USA 1-8OO-268-3994 C ANADA l-Y ear W arranty 1.
2. BELTRONICS manufactures its products using parts and components which are new or equivalent to new in accordance with industry standard practices. 3. The enforceability of this warranty is limited to the original consumer purchaser and is not transferable to, or enforceable by, any subsequent owner .
the instructions below. 1. T o obtain service during the one-year warranty period, please call the appropriate number below to obtain an RA number and shipping instructions. Remember to return your detector postage paid, insured and in suitable packaging.
range), 250 mA Radar Antenna T ype: Patented Diecast Hor n with Integrated T ransition to Microstrip Mixer Maximum Dimensions: 5.3”(L) X 3.1”(w) X 1.8”(H) W eight: 9.0 ounces BELTRONICS reserves the right to incorporate design improvements which may not be reflected in the specifications listed in this owner’s manual .
Head Office 2422 Dunwin Drive Mississauga, Ontario Canada L5L 1J9 (905) 828-1002 (905) 828-2951 F AX www .beltronics.com This product is subject to one or more of the following patents: U .
Ein wichtiger Punkt beim Kauf des Geräts Beltronics E936CS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Beltronics E936CS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Beltronics E936CS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Beltronics E936CS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Beltronics E936CS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Beltronics E936CS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Beltronics E936CS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Beltronics E936CS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Beltronics E936CS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
