Benutzeranleitung / Produktwartung F1DP108G des Produzenten Belkin
Zur Seite of 84
User Manual F1DP108G F1DP116G OmniView ® SMB KVM-ov er-IP Switch OmniView ® SMB KVM-ov er-IP Switch.
T abl e of Contents 1. Intr oduction ...................................................................................... 1 Packag e C ontents ......................................................................... 1 2. Overview ..................
T abl e of Contents 5. Using the Switch from a Remote Console ...................................... 43 Sta r ting a Re mote Ses sion .................................................................... 43 Usin g the Dr op- Down Bar ..................
1 1 2 3 4 5 6 7 8 9 10 section Intr oduction Congratulations and thank you for purchasing the Belkin OmniV iew SMB KVM-over -IP Switch (the Switch). This Switch provides enterprise-class, remote serve.
2 Overvie w Remote-Management F eatur es • DigitalorLocalUser The Switch allows one user to access and control multiple servers fr om a local console, or from any r emote console over a TCP/IP connection.
3 1 2 3 4 5 6 7 8 9 10 section Overvie w • VideoResolution The Switch supports video resolutions of up to 1600x1200 @ 75Hz for both local and remote consoles.
4 4 Overvie w Equipment Requir ements Server Interf ace Modul es Connecting the Switch to a server requir es a custom Belkin OmniView SMB Server Interface Module and a standard CA T5 patch cable.
5 1 2 3 4 5 6 7 8 9 10 section Overvie w Cables Belkin highly recommends you use Belkin Category 5e, FastCA T5e, or Category 6 Patch Cables for your SMB KVM-over -IP Switch to help ensure the superior performance of your video. These Cables offer the highest quality possible to ensure optimal data and video transmission.
6 Overvie w System Requir ements Operating-System(OS)Platf orms The SMB KVM-over -IP Switch is compatible with CPUs running on, but not limited to, the following OS platforms: • Windows ® NT ® , 2000, Server 2003, Server 2008, XP , Vista ® , or Windows 7 • Microsoft ® DOS 5.
7 1 2 3 4 5 6 7 8 9 10 section Overvie w (F1DP116G model shown) BANK Auto.
8 Overvie w Specifications Part No.: F1DP108G, F1DP116G No.ofUsersSupported: 1 digital or 1 local No.ofServersSupported: 8 and 16 respectively for 8- and 16-port models Daisy-C.
9 1 2 3 4 5 6 7 8 9 10 section Overvie w Dimensions: (F1DP108G) 17.25 x 1.75 x 7.5 in. (438 x 45 x 190mm) (F1DP116G) 17.25 x 1.75 x 7.5 in. (438 x 45 x 190mm) W eight: (F1DP108G) 5.0 lbs. (2.3kg.) (F1DP116G) 5.0 lbs. (2.3kg.) *May be daisy-chained with up to 15 OmniView SMB and PRO2 KVM Switches.
10 Overvie w SMB Server Interf ace Modul e, USB Part No.: F1DP101A-AU Emulation: Keyboard and mouse signals Power: Via attached server Keyboar d/Mouse Connection: USB T ype A Monitor Connection: HDDB15 male (VGA) ResolutionSupport: Up to 1600x1200 @ 75Hz Max.
11 1 2 3 4 5 6 7 8 9 10 section Local Inst allation Pr e-Configuration (T ypical Switch configuration) Wher etoplacetheSwitch: The enclosure of the Switch is designed for stand-alone or rack-mount configuration. The Switch can be mounted to a standard 19-inch server rack using the included rack-mount brackets and screws.
12 Local Inst allation Cable-Dis tanceRequir ements(forPS/2,USB,andSunServer s) VGA signals transmit best up to 100 feet (30m). Beyond that length, the probability of video degradation incr eases.
13 1 2 3 4 5 6 7 8 9 10 section Local Inst allation Step 1 Mountingthe Switch No te: Before you begin, locate the MAC address and device number on the back of the Switch.
14 Local Inst allation Step2 Connecting the Consol e tothe Switch 2.1 Connect your monitor VGA cable to the VGA port on the back of the Switch in the “Console” section. (Refer to diagram below.) ;X`jp:_X`e :fejfc =C8J? C8E J<I@8C >fCfZXc 2.
15 1 2 3 4 5 6 7 8 9 10 section Local Inst allation 2.3 Locate and connect a cable from your local area network to the RJ45 Ethernet port on the back of the Switch. (Refer to diagram below .) ;X`jp:_X`e :fejfc =C8J? C8E J<I@8C >fCfZXc 2.4 Attach the power cord to the IEC power jack on the back of the Switch, and power up the Switch.
16 Local Inst allation Step3 Connecting Server s tothe Switch (PS/2 Connection) 3.1 Make sure your server is powered of f. 3.2 Using the Belkin OmniView SMB Server Interface Module for PS/2 (F1DP101A-AP), connect the VGA connector to the monitor port on your server .
17 1 2 3 4 5 6 7 8 9 10 section Local Inst allation 3.4 Connect the Switch to the Server Interface Module using the included Belkin CA T5e Patch Cable or other CA T5 cable. (Refer to diagram below.) ;X`jp:_X`e :fejfc =C8J? C8E J<I@8C >fCfZXc 3.
18 Local Inst allation Step3 Connecting Server s tothe Switch (USB Connection) 3.1 Make sure your server is powered on. 3.2 Using the Belkin OmniView SMB Server Interface Module for USB (F1DP101A-AU), connect the VGA connector to the monitor port on your server .
19 1 2 3 4 5 6 7 8 9 10 section Local Inst allation 3.4 Connect the Switch to the Server Interface Module using the included Belkin CA T5e Patch Cable or other CA T5 cable. (Refer to diagram below .) Y our server should recognize your Server Interface Module and automatically install the HID USB driver if necessary .
20 20 Local Inst allation Step3 Connecting Server s tothe Switch (Sun MiniDIN8Connection) 3.1 Make sure your server is powered of f. 3.2 Using the Belkin OmniView SMB Server Interface Module for Legacy Sun (F1DP101A-AL), connect the VGA connector to the monitor port on your server .
21 1 2 3 4 5 6 7 8 9 10 section Local Inst allation 3.4 Connect the Switch to the Server Interface Module using the included Belkin CA T5e Patch Cable or other CA T5 cable. (Refer to diagram below.) ;X`jp:_X`e :fejfc =C8J? C8E J<I@8C >fCfZXc 3.
22 Local Inst allation Step4 PoweringUp the Systems 4.1 If you have not already done so, power on all servers connected to the Switch (servers can be powered on simultaneously). The Switch emulates both a mouse and keyboard on each port and allows your server to boot normally .
23 1 2 3 4 5 6 7 8 9 10 section Local Inst allation Daisy-Chaining Multipl e KVM Switches (Optional) Note: If you are only installing a single SMB KVM-over-IP Switch, skip to the “Remote Installation” section on page 28.
24 Local Inst allation BANK-DIP-Switch-ConfigurationChart (SMBCA T5KVMSwitches) DIP SWITCH# (SMB CA T5) BANK ADDRESS 1234 N/A N/A N/A N/A BANK 00 Primary (SMB KVM-over -IP Switch) UP DO.
25 1 2 3 4 5 6 7 8 9 10 section Local Inst allation Exampl eofDaisy-ChainConfiguration ;X`jp:_X`e :fejfc =C8J? C8E J<I@8C >fCfZXc BANK 00 SMB KVM-over -IP Switch BANK 01 Secondary.
26 26 Local Inst allation Getting Started: 1. Make sure that all servers and Switches ar e power ed of f and that each KVM Switch has been assigned a unique BANK address. 2. Place the SMB KVM-over -IP Switch and all secondary KVM Switches in the desired location.
27 1 2 3 4 5 6 7 8 9 10 section 27 27 Local Inst allation Connecting the servers: 1. Connect all servers to the SMB KVM-over -IP Switch and secondary KVM Switches. Refer to the “Connecting Servers to the Switch” section on page 16 for instructions.
28 Remote Inst allation Step 1 Identifyingthe IP Addr ess Once your Switch has been connected to your network and is powered up, a Dynamic Host Configuration Protocol (DHCP) server on your network will automatically assign the Switch an IP address, gateway addr ess, and subnet mask.
29 1 2 3 4 5 6 7 8 9 10 section Remote Inst allation Step 2 Logginginto the W eb Interf ace 1. Open your web browser . If you are using Windows Vista, you must run Internet Explor er in administrator mode.
30 Remote Inst allation page (see Fig. 2). Fig. 2 Network-Configuration Page.
31 1 2 3 4 5 6 7 8 9 10 section Remote Inst allation Step 3 NetworkConfiguration When first connecting to the Switch’ s HTTPS configuration page, two browser security warnings may appear . Click “Y es” on both war nings. Devic eName T ype in a name you would like to assign the Switch.
32 Remote Inst allation Enable DHCP When this box is checked (default setting), a DHCP server on your network is enabled to assign an IP address to the Switch. When this box is not checked (recommended), you can assign a static IP addr ess to the Switch.
33 1 2 3 4 5 6 7 8 9 10 section Remote Inst allation Step4 User Settings In the User -Profile page, you can create and edit up to 25 differ ent user accounts. T o open the page, click “User Settings” under “Administration” in the far -left menu (see Fig.
34 Remote Inst allation View Onl y A “view only” user is only allowed to view the screen of the tar get server without keyboard and mouse contr ol. Only limited options appear , such as “disconnect”. A View Only icon will appear on the viewer’ s local mouse pointer to indicate this status.
35 1 2 3 4 5 6 7 8 9 10 section Remote Inst allation T o edit a user: 1. Select the user fr om the list. 2. Click . Y ou can now change all the available parameters—user name, permission type, and password. 3. Click to save the changes. No te: For security , you should change the password for the default “admin” user name.
36 Remote Inst allation Step5 Switch Configuration The Switch-Configuration page allows you to specify the KVM Switches daisy-chained to the SMB KVM-over -IP Switch, and to name all connected servers. T o open the page, click “Switch Configuration” under “Administration” in the far -left column (see Fig.
37 1 2 3 4 5 6 7 8 9 10 section Remote Inst allation T ospecifyandnameservers: 1. Click next to the Daisy-Chain field and select the KVM-switch configuration that best suits your configuration. 2. Click . The number of possible connected servers will appear in the Server Name section.
38 Remote Inst allation Step6 Serial Settings If you have a serial device connected to the Switch, such as a power distribution unit (PDU), you must configure the serial (RS232) settings. T o open the Serial-Settings page, click “Serial Settings” under “Administration” in the far -left menu (see Fig.
39 1 2 3 4 5 6 7 8 9 10 section Remote Inst allation Step 7 SecuritySettings The Security-Settings page allows you to configure security featur es for the Switch. T o open the Security-Settings page, click “Settings” under “Security” in the far -left menu (see Fig.
40 Remote Inst allation Idle Timeout Select the maximum time allowed for inactivity before the user is disconnected from the r emote session. Choose “No Timeout” to disable the Idle Timeout feature. By default, the timeout inactivity period is set to 10 minutes.
41 1 2 3 4 5 6 7 8 9 10 section Remote Inst allation Maintenanc e Firmwar eUpgrade Y ou can upgrade the Switch’ s firmware to take advantage of new features or fixes as they become available. Visit www .belkin.com/support to check for firmware updates.
42 Remote Inst allation Restor e Factory Settings Y ou can restore the Switch to its original factory settings. This r estores the original parameters, resetting all the information added by the administrators, including: network settings, servers, switches, users, and passwords.
43 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e Starting a Remote Session T o start a r emote session: 1. At a client computer , open Inter net Explorer or Firefox web browser and type the IP Device’ s IP address ( https:// IP address ).
44 Using the Switch fr om a Remote Consol e Full-Screen Mode Y ou can work on the target server in full-scr een mode, just as if you were connected to the server locally . T o work in full-screen mode: 1. Ensure that the client computer has the same screen resolution as the target server .
45 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e Using theDrop-Do wn Bar The quick-access, drop-down bar pr ovides an easy method for changing settings and switching between servers (see Fig.
46 Using the Switch fr om a Remote Consol e Mouse Configuration and Settings Mouse-Pointer Alignment When working remotely at the client computer , two mouse pointers will appear: one for the client computer and one for the target server . The client computer’ s mouse pointer will appear on top of the target server’ s.
47 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e Manual Settings Y ou must manually synchronize the mouse pointers if: • themousesettingonthetar getserve.
48 Using the Switch fr om a Remote Consol e 4. Follow the instructions and set any relevant sliders to the same values as set in the tar get server’ s mouse properties. E xam pl es : For servers running on Windows XP , go to the Mouse settings in the Control Panel and uncheck “Enhance pointer precision” (see Fig.
49 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e Advanc ed-MouseEmulation In the Advanced-Mouse settings, you can set the type of mouse you would like the Switch to emulate. No te: Belkin recommends that you NOT change the advanced settings unless there is erratic mouse behavior (i.
50 Using the Switch fr om a Remote Consol e Keyboar d Configuration and Settings Y ou can define and transmit a keyboard sequence directly to the tar get server , without affecting the client computer . T o transmit a ke yboar d sequence: 1. In the quick-access toolbar , click .
51 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e 4. Select the desired sequence and click “OK”. The sequence will appear in the Special-Key-Manager box. 5. Click “OK”. The sequence will now appear in the Keyboard-Key-Sequence list.
52 Using the Switch fr om a Remote Consol e Video Configuration and Settings Refr esh Y ou may need to refresh the video image when changing the display attributes of a target server . T o refr esh the video settings: 1. In the quick-access toolbar , click .
53 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e Fig. 18 Manual V ideo-Adjust Bar Auto Video Adjust T o adjust the video automatically: 1. Open Inter net Explorer (or similar) in the background. 2. In the quick-access toolbar , click .
54 Using the Switch fr om a Remote Consol e Perf ormanceSettings (Bandwidth) Y ou can adjust the bandwidth settings on the Switch to give you the desired compression and color -support levels for your remote sessions. T o change the bandwidth settings: 1.
55 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e Sel ecting a Server The quick-access toolbar allows you to easily select and switch to any server connected to the Switch or daisy-chain configuration. T o connect to a diff er ent server: 1.
56 Using the Switch fr om a Remote Consol e Additional F eatur es When you click in the quick-access toolbar , a menu will appear . From this menu you can access your connected servers. The menu also provides the following features: • About verif ies the curr ent ve rsio n of sof twar e/firm war e o f your IP Device.
57 1 2 3 4 5 6 7 8 9 10 section 57 Using the Switch fr om a Remote Consol e RestoringF actory Def aults The “Restore Factory Settings” section below explains how to r estore factory settings from the web interface.
58 Using the Switch fr om a Local Consol e Now that you have connected your console and servers to the Switch, it is ready for use. Y ou can select connected servers by using either the front-panel port selectors, the On-Scr een Display (OSD), or hot-key commands through the console keyboar d.
59 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Local Consol e With a daisy-chain switch configuration, you can switch between BANKs (KVM switches) by pressing “Scr oll Lock”, “Scroll Lock”, “Page Up”, to switch to the previous BANK.
60 Using the Switch fr om a Remote Consol e Sel ecting a Server Using Port Sel ectors Y ou can directly select which server you wish to control by pr essing the port selector next to the corresponding port. The LED will illuminate to indicate the port is currently selected.
61 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e AutoScan Mode The AutoScan feature allows you to set your Switch to scan and monitor the activities of all connected servers one by one. The Switch remains on one server for a preset number of seconds, befor e switching to the next server .
62 Using the Switch fr om a Remote Consol e On-Scr eenDisplay (OSD) The OSD allows you to switch servers, assign names to your servers, enable and disable the AutoScan feature, set the desir ed scan-time interval for AutoScan, enable the password security featur e, and program hot keys.
63 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e OSD-Menu Keyboard Commands Command Function èê Navigate to differ ent servers in the same BANK Page Up/Page Down Select next .
64 Using the Switch fr om a Remote Consol e F unction/Help-PageKeyboar dCommands Command Function F4 Initiate AutoScan èê Navigate to the next field Insert Highlight field for editing Esc Retu.
65 1 2 3 4 5 6 7 8 9 10 section Using the Switch fr om a Remote Consol e Hot Key This allows you to select which key will be used to initiate hot-key commands. Y ou have four options to choose from: “Scroll Lock”, “Print Scr een”, “Ctrl”, and “F12”.
66 Using the Switch fr om a Remote Consol e Hot-Key-Command Shortcuts Below is a complete list of hot-key commands that can be used for your Switch: Command Function Scroll Lock, Scr oll Lock, è Swit.
67 1 2 3 4 5 6 7 8 9 10 section 67 Using the Switch fr om a Remote Consol e Sun Combo Keys The PS/2 keyboard connected to the Switch does not support the Sun keypad to perform special functions in the Sun-operating-system environment.
68 Using the Switch fr om a Remote Consol e Updating Firmwar e The Switch features flash-upgradeable firmwar e to ensure compatibility with the latest devices and servers. Firmware upgrades ar e free for the life of your Switch. T o update your firmware, download the appropriate firmwar e file and utility from www .
69 69 1 2 3 4 5 6 7 8 9 10 section F r equentl y Asked Questions Whatoperatingsyst emsdoestheSwitchsupport? The Switch will support operating systems that run on a PS/2 or USB platform.
70 F r equentl y Asked Questions DoestheSwitchsupportLinux? Y es, the Switch works with Red Hat and other Linux distributions configured for PS/2 or USB support. WhatcommunicationportsdoestheSwit chusesoitcan beacc essedr emotely? Five ports have to be open to remotely connect to the Switch.
71 1 2 3 4 5 6 7 8 9 10 section T r oubl eshooting Local Console General Pr oblem: My server does not boot when connected to the Switch but works fine when I connect the keyboard, video, and mouse dir ectly to the server .
72 T r oubl eshooting Keyboar d Pr oblem: The server does not detect a keyboard and I get a keyboar d error reported at boot up. Solution: • CheckthatthekeyboardcableontheServerInterfaceModuleiscompletely connected to your server .
73 1 2 3 4 5 6 7 8 9 10 section 73 T r oubl eshooting Pr oblem: When I switch from one port to another , mouse movement is completely erratic. Solution: • Makesureyoudonothavemorethanonemousedriverinstalled.
74 T r oubl eshooting Remote Consol e Pr oblem: The Remote console login page will not display on my browser . Solution: • Verifythatyouar eusingMicrosoftInternetExplorer6.0,7.0,8.0 (in Compatibility View), Fir efox 3.
75 1 2 3 4 5 6 7 8 9 10 section T r oubl eshooting Pr oblem: The video quality is bad and/or grainy. Solution: • Usethequick-accesstoolbartorefr eshthevideoscreen. • Usethequick-accesstoolbarandselect“Automatedadjust”under“Manual video adjust”.
76 Gl ossary The following definitions are used thr oughout this User Manual. AutoScan: A mode of operation where the KVM switch scans fr om one port to another , on an ongoing basis, as configured by the user . BANK: The address of a daisy-chained KVM switch (00–15), set by the DIP switch.
77 1 2 3 4 5 6 7 8 9 10 section Gl ossary KVM: Literally “Keyboard V ideo Mouse”, this term refers to technology that allows two or more computers to be contr olled by one keyboard, video monitor , and mouse; some switches that use KVM technology enable sharing of other peripherals such as audio speakers, microphones, and printers.
78 Information F C C Statement Declarationof Conformitywith F C C Rul es forElectr omagnetic Compatibility W e, Belkin International, Inc.
79 1 2 3 4 5 6 7 8 9 10 section Information purchaser , or if Belkin determines that the Belkin product has been improperly installed, altered in any way , or tampered with.
80 1 2 3 4 5 6 7 8 9 10 section Information This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.
P75215-A Belkin T ech Support US: 800-223-5546 ext. 2263 310-898-1100 ext. 2263 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: www .belkin.com/support Belkin International, Inc. 501 W est Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd.
Ein wichtiger Punkt beim Kauf des Geräts Belkin F1DP108G (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Belkin F1DP108G noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Belkin F1DP108G - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Belkin F1DP108G reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Belkin F1DP108G erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Belkin F1DP108G besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Belkin F1DP108G verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Belkin F1DP108G. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Belkin F1DP108G gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
