Benutzeranleitung / Produktwartung PA-PRO 900 des Produzenten VocoPro
Zur Seite of 32
owner's manual P A -PRO 900 -PRO 900 900W PROFESSIONAL P .A. 900W PROFESSIONAL P .A. MIXER MIXER.
Safety Instructions . . . . . . . . . . . . . . 3 FCC Information . . . . . . . . . . . . . . . . 4 W elcome . . . . . . . . . . . . . . . . . . . . . 5 Listening for a Lifetime . . . . . . . . . . . 6 Features . . . . . . . . . . . . . . . . . . . . .
3 CAUTION RISK OF SHOCK CAUTION: T o reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. W ARNING T o reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
4 4 4 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
5 5 5 And thank you for purchasing the P A-PR O 900 from VocoPro, your ultimate choice in vocal entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufa.
6 Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your equipment offers.
7 Features • 450W + 450W RMS Power Output (4 ohms) • 8 Channels (4 Mic/Line, 4 Stereo/Line) • Mic/Line Channel Inputs: ¼”, XLR • Stereo/Line Channel Inputs: 1/8”, L/R RCA, L/R ¼” • I.
8 Hookup Diagrams .
9 House of W orship/Full Band For this example, there are four microphones connected to channels 1-4. These microphones can either be the optional UHF wireless channels, low-impedance corded microphones, or high-impedance corded microphones. Musical instruments are connected to channels 5-8.
10 Hookup Diagrams .
11 DJ For this example we have two microphones in use on channels 1 and 2; one for the DJ, the other as a backup or guest speaker . There is a line-out from a DJ mixer connected to CH. 5/6 to ser ve as the main music source. For additional music needs, either a laptop computer or MP3 player is connected to CH.
12 .
13 Public Address/Presentation For this set up, there are four microphones connected to channels 1-4. These microphones can be either the optional UHF wireless channels, low-impedance corded microphones, or high-impedance corded microphones. Source music devices are connected to channels 5-8.
14 REAR P ANEL FEA TURES 1. POWER CONNECTOR – Connect the supplied 3-prong power cord to this connector . 1a. NOTE: Before plugging in to a power receptacle, make sure that voltage of your P A-PRO 900 is the same voltage as your local AC mains voltage.
15 CHANNEL STRIPS The six ver tical channel strips contain all the individual controls for each channel. Each channel strip works independently of each other , and adjusts only the signal plugged into the jacks below it.
16 P A TCH BA Y MIC/LINE (CH 1-4) The MIC/LINE inputs are for connecting microphones, instruments, or line-level output signals. Once the devices are connected, the signals can be customized using the individual channel strips, and fur ther controlled using the DSP , EQ and main system controls.
17 COMPRESSOR (CH.1-4) Channels 1-4 have on-board compression available for preventing unwanted distor tion in the audio signal. The compressor works by setting a threshold level with the threshold knob. Once a signal level exceeds that threshold, the signal is automatically compressed.
18 18. ECHO DELA Y – This control is used to adjust the 18. ECHO DELA Y – This control is used to adjust the 18. ECHO DELA Y length of time between each echo repetition. When set to minimum, the echo repetitions will occur rapidly , with little to no time between them.
19 25. MAIN L, R GRAPHIC EQ – This 7-band graphic EQ 25. MAIN L, R GRAPHIC EQ – This 7-band graphic EQ 25. MAIN L, R GRAPHIC EQ is used to customize the sound of the MAIN L, R mix output. This EQ section affects the signals found in the MAIN (XLR), headphone, line-level, and speaker-level jacks (when confi gured to MAIN L, R).
20 29. MONITOR GRAPHIC EQ – This 7-band graphic EQ is 29. MONITOR GRAPHIC EQ – This 7-band graphic EQ is 29. MONITOR GRAPHIC EQ used to customize the sound of the MONITOR mix output. This EQ section affects the signals found in the MONITOR (1/4”) jack and the speaker-level jack (when confi gured to MAIN L, R+MONITOR).
21 33. +48V PHANTOM POWER – This button toggles phantom power to all the XLR microphone jacks. Enabling phantom power sends low current DC voltage to a microphone’ s electronics through the same cable that carries the audio signal. Most professional condenser microphones require phantom power .
22 Master Out Panel The master out panel is where you make output connections to external devices such as mixers, amplifi ers, powered speakers, headphones, recording devices, etc. All the signals from these jacks are line-level, meaning that they are not powered by the internal amplifi er , and are suited for connection to line-level inputs.
23 SDR-3 RECORDER (optional accessory) Use the optional SDR-3 (if installed) to capture audio direct to SD card. Once recorded, the audio can then be routed to either CH 7-8 or the MAIN mix for immediate playback. Of course, you can also remove the SD card and transfer the MP3 fi les to your computer for fur ther editing and processing.
24 9. SD CARD SLOT – Inser t your SD card into this slot. The SDR-3 will not record without an SD card in this slot. 10. REC LEVEL LEDs – These LEDs visually represent the gain level of the signal being recorded. There are fi ve green LEDs and two red LEDs.
25 Optional Accessories UHF W ireless Channels (optional accessory) Y ou can add up to four UHF wireless microphone modules (sold separately) to use with the P A-PRO 900.
26 T echnical Specifi cations P A-PRO 900 SPECIFICA TIONS Mixer Input Specifi cation (A T MAIN L/R OUTPUT +4dBu,1kHz) INPUT CONNECTION LEVEL(RA TED INPUT) TOT AL GAIN IMPEDANCE MIC INPUT XLR (BAL) -50dBu 54dB 1 Kohm CH1-CH4 1/4” TRS (BAL/UNBAL) -20dB(P AD ON) 24dB MUSIC LINE 1/4”TRS(UNBAL) -22dBu 26dB 2.
27 T echnical Specifi cations Frequency Response (A T MAIN L/R OUTPUT +4dBu) MIC INPUT /CH1-4 10Hz-24kHz 0dB / -1.5dB STEREO INPUT/ CH5-8 10Hz-35kHz 0dB / -1.
28 T echnical Specifi cations Hum & Noise(S/N) OUTPUT LEVEL CONDITION AMP OUT OUT < -80 dB 1/2POWER 1kHz LEFT/RIGHT STEREO LOOP RETURN IN MIC T O MAIN MIX OUTPUT < -74 dB MIC LEVEL CENTER, .
29 T echnical Specifi cations Maximum Input Level INPUT CONNECTION LEVEL MIC INPUT XLR (BAL) -20dBu CH1-CH4 1/4” TRS (BAL/UNBAL) +10dB(P AD ON) STEREO LINE 1/4”TRS(UNBAL) -0dBu CH5/6-7/8 CD RCA STEREO(UNBAL) -0dBu MP3 1/8” PHONE(UNBAL) -2dBu TIP:L,RING:R EFFECT Controls (D.
30 Notes.
31 There is no power • Make sure the power adapter cord is firmly connected to the back of the unit and to the power outlet. • If using a power strip/surge-protector , make sure that it is plugged in and switched on. • Check the fuse, and replace if blown.
P A-PRO 900 Owner’ s Manual © V ocoPro 2010 v1.1008 www .vocopro.com.
Ein wichtiger Punkt beim Kauf des Geräts VocoPro PA-PRO 900 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie VocoPro PA-PRO 900 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für VocoPro PA-PRO 900 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von VocoPro PA-PRO 900 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über VocoPro PA-PRO 900 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon VocoPro PA-PRO 900 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von VocoPro PA-PRO 900 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit VocoPro PA-PRO 900. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei VocoPro PA-PRO 900 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
