Benutzeranleitung / Produktwartung XMF1000 des Produzenten Vizio
Zur Seite of 24
XMF1000 - QUICK INST ALL GUIDE QUICK INST ALL SLIM HDTV MOUNT UNIVERSAL FOR 32” - 55” TVS UP TO 100 LBS.
IMPORT ANT SAFETY INFORMA TION Read the Important Safety Information on this page before installing or using this mounting system. Always follow the instructions in this Quick Install Guide. VIZIO is not liable for damage or injury caused by incorrect mounting, assembly , or use.
STEP 1 - BEFORE YOU BEGIN YOU WILL NEED Power Drill 1/2” (12.7mm) Concrete Drill Bit 7/32” (5.5mm) Drill Bit Pencil Electronic Stud F inder Phillips-head Screwdriver 1/2” Wrench Before you begin the installation, ensure you have all of the items listed on this pa ge.
STEP 2 - REVIEW THE P ACKAGE CONTENTS Before you begin, ensure all parts are included and undamaged. T o prevent loss, do not unpack the small parts until they are required. If any parts are missing or damaged, contact VIZIO Customer Ser vice (877) 698-4946.
3 x 2 M8 x 4 x 2 M4 x 4 x 2 M5 x 4 x 2 M6 x 4 LAG x 4 x 4 ANCHOR x 4 x 4 MISC x 4 [ M4 x 44 ] [ M4 x 15 ] [ M5 x 44 ] [ M5 x 15 ] [ M6 x 44 ] [ M6 x 15 ] [ M8 x 48 ] [ M8 x 20 ] x 4 [ M6 x 20 ].
STEP 3A - MOUNTING TO A WALL WITH WOOD STUDS The mount can be attached to walls with wood studs. The wall covering (drywall, lath, plaster , etc.) may not be thicker than 1/2”. If you are mounting on a concrete wall, go to Step 3B on page 10. 1. Use the electronic stud finder to locate two studs in the wall.
4 3. Remove 1 lag bolt and 1 washer from the pouch labeled LAG . Place part A against the wall as shown, and use a wrench to insert the lag bolt and washer into the hole you just drilled. 4. Push the bar through the opening in the bracket ( part A ) as shown.
5. Remove the bar , the leveler , and the unattached bracket ( part A ) from the wall. Using the power drill and the 7/32” drill bit, drill into the pencil mark as shown. Ensure you are drilling into the stud. Drill the hole about 2” into the stud.
7. Push the bar through the openings in each bracket ( part A ) as shown. Snap on the leveler ( part E ) and verify that the bar is level. Make any small adjustments, then use a wrench to tighten the 2 lag bolts completely . 8. Using the power drill and the 7/32” drill bit, drill into the top 2 holes as shown.
8 9. Remove 2 lag bolts and 2 washers from the pouch labeled LAG . Use a wrench to insert the lag bolts and washers as shown. Tighten the bolts completely . 10. Attach the handle ( part F ) to the end of the bar . Secure the handle to the bar by inserting a screw ( part H ) into the bottom hole on the handle.
OPTIONAL: The extender can be attached to lengthen the bar . A longer bar may be easier to access when mounting large TVs. T o attach the extender , push it onto the end of the bar . Secure the extender to the bar by inserting a screw ( part H ) into the bottom hole on the extender .
1 STEP 3B - MOUNTING TO A CONCRETE WALL 1. Determine the height at which you want the mount to hang. Mark the position of the left bracket hole with a pencil. Using the power drill and the 1/2” concrete drill bit, drill a hole into the pencil mark. Drill about 2 1/2” deep.
11 4 3. Remove 1 lag bolt and 1 washer from the pouch labeled LAG . Place a bracket ( part A ) against the wall as shown, and use a wrench to insert the lag bolt and washer into the anchor . 4. Push the bar through the opening in the bracket ( part A ) as shown.
5. Remove the bar , the leveler , and the unattached bracket ( part A ) from the wall. Allow the attached bracket to s wing down. Using the power drill and the 1/2” concrete drill bit, drill into the 3 pencil marks as shown. Drill each hole about 2 1/2” deep.
7 7. Remove 3 lag bolts and 3 washers from the pouch labeled LAG . Place the other bracket ( part A ) against the wall as shown, and use a wrench to insert the lag bolts and washers into the anchors. Do not insert the lag bolts completely . Leave 1/2” of the bolts showing.
14 9 9. Attach the handle ( part F ) to the end of the bar . Secure the handle to the bar by inserting a screw ( part H ) into the bottom hole on the handle. Tighten the screw completely . OPTIONAL: The extender can be attached to lengthen the bar . A longer bar may be easier to access when mounting large TVs.
STEP 4 - A TT ACHING THE TV HOOKS AND KICK ST ANDS 1. Gently place the TV on the floor screen-down. Y ou may want to place a rug or blanket beneath the screen to prevent scratches. In your TV’ s User Guide, find the size and depth of your TV’ s mounting holes.
OPTIONAL: If you want your TV to have a 9° downward tilt when mounted, use the spacers ( part G ) and the longer screws when mounting the TV hooks. 3. Using the screwdriver , insert the screws and washers as shown. Because each TV is different, your VIZIO TV mount includes screws of different lengths.
4. Place the two kickstands ( parts C and D ) against the two bottom mounting holes as shown. The larger kickstand can be placed on either the left or right mounting hole. 5. Using the screwdriver , insert the screws and washers as shown. Do not use a short screw if a longer screw can be inserted completely .
STEP 5 - HANGING THE TV ON THE MOUNT 1. T urn the handle on the bar until the flat side of the bar is facing the wall. 2 . With the help of another person , lift the TV and hang the TV hooks on the bar as shown.
3 3. T urn the handle on the bar until the flat side of the bar is facing down. Ensure the flat side of the bar is f acing down. This locks the TV to the bar . If the flat side of the bar is not f acing down, your TV is not locked to the bar . Adjust the position of the TV by sliding it to the left or right.
TECHNICAL SUPPORT Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you.
ONE-YEAR LIMITED WARRANTY & INSURANCE Covers units purchased as new in United States and Puerto Rico Only VIZIO warrants for a period of one (1) year from the date of purchase to the original purc.
TRADEMARKS SHOWN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. IMAGES USED ARE FOR ILLUSTRA TION PURPOSES ONL Y . VIZIO , THE V LOGO , WHERE VISION MEETS V ALUE, AND OTHER VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPER TY OF VIZIO INC. PRODUCT FEA TURES AND SPECIFIC A TIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Ein wichtiger Punkt beim Kauf des Geräts Vizio XMF1000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Vizio XMF1000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Vizio XMF1000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Vizio XMF1000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Vizio XMF1000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Vizio XMF1000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Vizio XMF1000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Vizio XMF1000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Vizio XMF1000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.