Benutzeranleitung / Produktwartung C-RM1000 CU des Produzenten Vizio
Zur Seite of 60
Thank you for purchasing TOA's Remote Controller. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
2 T ABLE OF CONTENTS 1. SAFETY PRECAUTIONS .................................................................................. 5 2. GENERAL DESCRIPTION ............................................................................... 7 3. FUNCTIONS .....
3 9.8. Combination Camera Menu Display ................................................................. 23 9.9. Storing the Preset Positions .............................................................................. 24 9.10. Deleting Preset Position Data (Communication method: Type B only) .
4 12.3.3. Closing the menu .................................................................................. 39 12.4. Function Settings ............................................................................................... 40 12.4.1. Group settings .
5 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
6 Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage. CAUTION When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.
7 2. GENERAL DESCRIPTION TOA's C-RM1000 Remote Controller is used to remotely control TOA's 9-channel (C-DR091 series) or 16- channel (C-DR161 series) Digital Video Recorders. It can also remotely control operation of Combination cameras connected to the Digital Video Recorder.
8 4. HANDLING PRECAUTIONS • Do not connect the AC adapter when using the supplied modular cable since the power is supplied from the Digital Video Recorder. • Do not connect the DVR Control Output Terminal A (RJ-11) to the telephone line. • Do not lift the Remote Controller by joystick or subject the Controller to strong shocks.
9 Digital Video Recorder number (DVR): Refers to the DVR-ID number when the Digital Video Recorders are cascade- connected. Monitor number (MON): Refers to the Digital Video Recorder's monitor output number. There are two monitor outputs: Monitor outputs 1 and 2.
10 6. NOMENCLA TURE AND FUNCTIONS [ Top Panel ] TELE WIDE RIGHT LEFT UP DOWN F4 F3 F2 F1 DVR MON CAM POS DVR PLA Y / LIVE SEARCH SCREEN AUTO SEQUENCE MUL TI FULL SHIFT MENU REMOTE CONTROLLER C-RM1000 .
11 (8) Joystick In live mode Performs pan, tilt, and zoom operation of connected Combination Cameras. I n playback mode Performs playback, reverse playback, fast forward playback, and pause operation.
12 [ Rear Panel ] [ Bottom Surface Indications ] 23 24 25 TOA Corporation MADE IN JAPAN model C-RM1000 CU REMOTE CONTROLLER 12/13.8V 250mA SER. to telephone line.
13 7.1.1. Group Selection (cascade connection only) Notes • Group settings must be performed in advance. (Refer to p. 40 ; Group Settings.) • Screens are not switched during group selection even when an alarm signal is received or the priority recording button is pressed.
14 CAM CAM MENU 711 5 LCD screen DVR MON CAM POS Camera No. displayed on the full screen 7.3. Camera Selection Select the camera to be displayed or operated. 1. Press the camera number to be selected using the ten-key numerical pad. 2. Press the CAM key.
15 8.1. Full Screen Display 1. After selecting the Digital Video Recorder, enter the camera number to be displayed. 2. Press the FULL key. The designated camera's image is displayed on the full screen and the FULL key lights. The camera number is displayed on the LCD screen.
16 1. Press the MULTI key after selecting the Digital Video Recorder. The MULTI key lights and camera Nos. 1 - 4 (4-segment split-screen A) are displayed on the monitor. 2. Press the MULTI key. Camera Nos. 5 - 8 (4-segment split-screen B) are displayed on the monitor.
17 8.4. 9-Segment Split Screen Display 1. Press the SHIFT key. The SHIFT key lights. 2. Press the MULTI (9-Split-Screen) key. The MULTI key lights and Camera Nos. 1 - 9 (9-segment split screen A) are displayed on the monitor. 2-1. When the 16-channel recorder is used Repeat Steps 1 and 2 to display the camera numbers to be monitored.
8.7. Sequential Display Note Sequential display settings must be performed for the Digital Video Recorder in advance. Please refer to the instruction manual enclosed with the Digital Video Recorder for more information. Press the SEQUENCE key after selecting the Digital Video Recorder.
19 End DVR 1 Monitor 1 sequence setting 2 16 1 End DVR 4 Monitor 1 sequence setting End 2 16 1 DVR 2 Monitor 1 sequence setting 2 16 1 "DVR" represents the Digital Video Recorder. [Example] When DVR 1 - 4 are assigned to Group 1; Group sequence ( Master Monitor 1’s display oder ) 8.
20 8.9. Zoom Display (Electronic zoom) Live or recorded full-screen images can be viewed in 2X zoom display. Multiple-segment split-screens cannot be zoomed. Note "Zoom ON" and "Zoom OFF" must be preprogrammed into a function key or abbreviation number.
21 9.2. Focus Adjustment When the Combination camera is connected, the lens focus can be adjusted using the FOCUS key. After selecting the camera, press the FOCUS (+) or ( - ) key. Focus operation continues as long as the key is pressed. Pressing the (+) key focuses the lens on distant objects, and pressing the ( - ) key focuses on near objects.
22 9.3. Iris Operation (Communication method: T ype B only) This iris can be adjusted using the IRIS key when the Combination camera is connected. After selecting the camera, press the IRIS ( + ) or ( - ) key. Iris operation continues as long as the key is pressed.
23 9.6. Focus Speed Settings Camera focus speed can be set. (Refer to p. 48 ; Focus Speed.) 9.7. Utilization of the Abbreviation Number Function By pressing the SET key after entering the preprogramme.
24 9.9. Storing the Preset Positions The preset position can be stored on the camera menu, however it can be easily stored by performing the following operation; 1 . Select the camera for which the preset position is programmed. (Refer to p. 13 ; Equipment Selection.
25 10.1.2. Priority recording operation For details, please refer to the instruction manual enclosed with the Digital Video Recorder. 1. Press the PRIORITY REC key. The PRIORITY REC key flashes and the buzzer tone sounds, commencing Priority recording.
26 10.1.3. Resetting alarm event recording The Alarm reset key flashes and the buzzer tone sounds during Alarm event recording. Alarm event recording cannot be initiated by the Remote Controller. For the method of starting the Alarm event recording, refer to the instruction manual enclosed with the Digital Video Recorder.
27 10.2.3. Stop operation Press the PLAY/LIVE key while in playback mode. Playback stops, switching to live mode. The PLAY/LIVE key remains unlit while in live mode. 10.2.4. Forward/reverse quick playback Leave the joystick tilted to the left or right during playback.
28 10.2.7. Frame advance/reverse playback Tilt the joystick to the left or right while playback is temporarily stopped. The left-tilt position permits frame reverse playback, and the right-tilt position permits frame forward playback. Frame reverse Frame advance In pause FOCUS In pause FOCUS In pause 10.
29 10.3. Search Operation It is possible to search recorded images by date, time, or event. For details, please refer to the instruction manual enclosed with the Digital Video Recorder.
30 10.6. Archiving Images recorded on the Digital Video Recorder can be archived to a DVD-R disk or USB flash drive. For details, please refer to the instruction manual enclosed with the Digital Video Recorder. 1. Hold down the Menu key for 2 seconds or more during a playback pause.
31 10.7. T riplex Settings Live images can be assigned to any segment of the screen while recorded images are played back on the multi-segment split screen.
32 10.8.2. Log-out 1. Hold down the DVR MENU key for 2 seconds or more. The “LOGOUT”/”LOGIN” selection screen is displayed on the monitor. Note When the operation level is set to Level1, holding down the DVR MENU key for 2 seconds or more displays the screen for selecting either LOGOUT or MENU.
33 1 1. OTHER OPERA TIONS 1 1.1. Log-In and Log-Out If a password has been set, it is possible to log in to or log out of each operation level by following the procedures below. For password settings, please refer to p. 46 ; Password. For the Digital Video Recorder’s login and logout method, refer to p.
34 1 1.2. Abbreviation Number This function permits quick dialing preprogrammed into a number. Camera images (DVR No., monitor No., camera No., and position No.) and the functions of the Combination Camera and Digital Video Recorder can be programmed into a number.
35 11.3.3. To reset alarm Hold down the RESET key for 2 seconds or more while alarm is being activated. The RESET key extinguishes, canceling the alarm mode.
36 12. SETTINGS 12.1. Setting Item Summaries Setting Item Description Remote Controller Menu Display (Hold down the Menu key for 2 seconds or more.) Group 1. Setting Two or more cascade-connected Digital Recorders can be assigned to a group. It is also possible to restrict access to operation of the Remote Controllers in each group.
37 Group 1. Setting Group No. – Control ON/OFF DVR No.– Channel No. selection RM RF RM RF NO YES Abbreviation No. – Quick display settings Invalid Valid – Password entry Invalid Valid – Password entry Invalid Valid – Password entry OFF/ 1MIN / 5MIN/ 10MIN/ 30MIN/ 60MIN DVR No.
38 12.2. Setting Keys and Display Screen [Keys to be used for settings] Ten-Key Numerical Pad Used to enter a number. LCD screen Displays setting items and contents. Joystick Moves the cursor or selects the setting items or contents. Set Key Confirms the setting items or contents.
39 12.3. Basic Setting Operations Here, basic operating procedures for each setting item are described. Enter a password to log in to Operation Level 1 and display the Remote Controller’s menu. Refer to p. 33 ; Log-in and Log-out for the log-in method.
40 When selecting “Setting” … 1. Select [GROUP] while the menu is displayed and press the SET key. The setting content is displayed on the second line. 2. Select [1. SET] and Press the SET key. The group number flashes, permitting the current group setting contents to be checked.
41 GROU P 2. T R A N S F E R 2 T RAN S F E R 1. R M R F 1 When selecting “Transfer”… 1. Select [GROUP] while the menu is displayed and press the SET key. The setting content is displayed on the second line. 2. Select [2. TRANSFER] and press the SET key.
12.4.3. Abbreviation (Quick display function) Camera images (DVR, monitor, camera and position numbers) can be displayed in the full screen on the monitor by simply pressing a preprogrammed abbreviation number (numerical keypad entry and the SET key).
43 12.4.4. Abbreviation (Function programming) The functions of the Combination Camera and Digital Video Recorder can be programmed into an abbreviation number (1 - 508 and F1 - F4 keys). Note The Combination Camera's protocol must be selected before performing abbreviation number settings.
44 Abbre- viation No. Default Setting Description Description Abbre- viation No. Default Setting F1 F2 F3 F4 251 252 253 254 255 256 257 258 259 260 261 262 Auto focus Auto pan start Preset sequence s.
45 12.4.5. Camera Protocol Selecting protocol of the Combination Camera connected to the Digital Video Recorder only displays the abbreviation function that can be used for each protocol. The abbreviation function table is factory-preset to those for the model of TOA-B.
46 12.4.6. Password The Remote Controller's operation level can be set using passwords. The table below shows the available and unavailable functions of each operation level.
47 [ Passwords and operation levels ] If no passwords have been set, Operation Level is “1.” Refer to the table below if a password has been set. Password 1 Operation Level 1 Operation Level 2 Operation Level 3 Full-Lock Password 1 : Level after log-out.
48 12.4.8. Buzzer tone The buzzer tone can be set to ON or OFF. 1. Select [BUZZER] while the menu is displayed and press the SET key. The setting content is displayed on the second line. 2. Tilt the joystick to the left or right to select the setting content and press the SET key.
49 12.4.9. Key operation tone The tone generated whenever the key is pressed can be set to sound or not to sound. 1. Tilt the joystick to the left or right to select [KEY CLICK ON/OFF] while the menu is displayed and press the SET key. The setting content is displayed on the second line.
50 12.4.12. Monitor lock If the Monitor Lock function is set for the system in which multiple Remote Controllers are connected, allowing the operable monitors to be restricted. This eliminates the necessity for switching monitors, allowing malfunctions to be avoided.
51 12.4.15. Expansion Cannot be used. 12.4.13. Language Set the language to be displayed on the LCD screen. 1. Select [LANGUAGE] while the menu is displayed and press the SET key. The setting content is displayed on the second line. 2. Tilt the joystick to the left or right to select the setting content and press the SET key.
52 13. CONNECTIONS 13.1. Equipment Connections • Use the CPEV-S cable (twisted pair shielded cable) with diameter larger than 0.65 mm (AWG22) for connection between control terminals.
53 13.2. System Example 13.2.1. Basic system Color camera Digital Video Recorder C-DR091 or C-DR161 Series Monitor 1 16 Monitor 2 Disk Array C-DA1000 Series 1 PC Remote Controller C-RM1000 Live displa.
54 13.2.2. Expanded Digital video recorder system (Cascade-connection) Combination Camera Digital Video Recorder 1 C-DR091 or C-DR161 Series T o AC Main 1 - 16 Remote Controller 1 C-RM1000 RS-485 DVR .
55 [Remote Controller connections using the dedicated cable] 13.2.3. Connections between the Remote controller and the Digital video recorder T ermination switch: OFF T ermination switch: OFF T ermination switch: ON Remote Controller Digital Video Recorder RJ-1 1 terminal The maximum cable length is 1.
56 14. DIGIT AL VIDEO RECORDER F AILURE INDICA TION The Digital Video Recorder's failures can be confirmed at the Remote Controller. 14.1. Remote Controller Indication and Status LCD Screen ALARM RESET Key Buzzer * Digital VideoRecorder Failure Status * Available when the Remote Controller’s buzzer settings are set to ON.
57 15. TROUBLESHOOTING Remedy • Connect correctly. • Connect to the AC outlet. (The Digital Video Recorder supplies power to the Remote Controller even when in standby mode.) • Connect correctly. • Switch on the power. • Connect equipment correctly.
58 Operation Item Operation Method (Key Operation) Display Status Remark Reference Page • Equipment selection Digital Video recorder selection Numerical keypad (DVR No.) + DVR MON DVR No. displayed on the LCD and DVR lights. Monitor No. displayed on the LCD.
59 Operation Item Operation Method (Key Operation) Display Status Remark Reference Page • Digital Video Recorder operation P. 27 P. 27 Pause Playback + DOWN Pause reset Pause mode + UP P. 28 Frame advance playback Pause mode + RIGHT P. 28 Frame reverse playback Pause mode + LEFT P.
133-12-992-4B 17. SPECIFICA TIONS * Applies to the system where the unit and digital video recorder are connected in a matched pair. Represents the total of connected cable distances if multiple Digital video recorders or Interface units are connected in the system.
Ein wichtiger Punkt beim Kauf des Geräts Vizio C-RM1000 CU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Vizio C-RM1000 CU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Vizio C-RM1000 CU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Vizio C-RM1000 CU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Vizio C-RM1000 CU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Vizio C-RM1000 CU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Vizio C-RM1000 CU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Vizio C-RM1000 CU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Vizio C-RM1000 CU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
