Benutzeranleitung / Produktwartung 51" Micro Display Projection TV des Produzenten Vivitek
Zur Seite of 58
51 " 51" RPTV www .vivitekcorp.com 51" Micr o Display P r ojection TV USER GUIDE View of the Digital World View of the Digital World View of the Digital World View of the Digital World.
DEAR CUST OMER Thank you for your purchase of this Rear Projection T elevision. T o ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product.
W ARNING: The cooling fan in the REAR PROJECTION TV continues to run for about 150 seconds before the REAR PROJECTION TV enters the standby mode. During normal Operation, when putting the REAR PROJECTION TV into standby mode always use the POWER button on the REAR PROJECTION TV or on the remote control.
iv Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby "" Laboratories. Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP , 5510752 and 5736897. BBE and BBE sysbol are registered trademarks of BBE Sound, Inc.
v IMPORT ANT SAFETY INSTRUCTIONS CAUTION : Please read all of these instructions before you operate this product and save these instruction for later use. Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
vi IMPORT ANT SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING AS PER NA TIONAL ELECTRICAL CODE, ANSI/NFP A 70 ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NE.
1 Contents DEAR CUSTOMER ii IMPORT ANT INFORMA TION ii TRADEMARKS iv IMPORT ANT SAFETY INSTRUCTIONS v Contents 1 Main Features 2 Supplied Accessories 3 Before Operating Y our Rear Projection T elevisi.
2 Main Features Please enjoy your Rear Projection T elevision (RPTV) that features: T exas Instruments latest DLP (Digital Light Processing) third generation HD4 Digital Micromirror Device TM (DMD) which features Smooth Picture technology for the very best image quality .
3 Supplied Accessories Before Operating Y our Rear Projection T elevision Location For normal operation, your RPTV should be set up in the room where cool, adequate ventilation is provided. Do not position the back of the RPTV in a place where free airflow is restricted.
4 Viewing Y our TV is best viewed by sitting directly in front of it about 10 to 18 feet from the screen. The brightness decreases as the viewer moves to the left or to the right of the set. During the daytime, reflections from light outside may appear on the screen.
5 Cleaning & Maintenance Cleaning the Screen The screen of the RPTV has been specially treated. T o clean users should wipe the surface gently using only a cleaning or a soft, lint-free cloth. If the surface is particularly dirty , use a little water on the cloth (never directly on the screen), then wipe the screen with it.
6 Antenna Connections T T o fully utilize the various features provided, such as the 2- T uners Picture In Picture System, UNIVERSAL PLUS, and some connectors for high-quality VCR/DVD playback, set up this unit properly by following the procedures below .
7 NOTICE: 75-ohm coaxial cable F-type connector F-type connector shold be finger-tightenned only . When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.
8 Using The V ideo and Audio Input T erminals Using the Video and Audio Input T erminals Connecting video equipment for video playback. When the television is connected to video equipment as shown below , the material being played back on the video equipment can be seen on the television screen.
9 Connecting your Digital V ideo Equipment (HDMI & DVI ) Using Digital Video Digital video equipment and other devices that have a digital interface compliant with the HDMI & DVI (Digital Visual Interface) standard should be connected to the HDMI input of the RPTV .
Connecting your DVD Player Using S-Video or Composite video 1. T urn off the power of the RPTV and DVD player . 2. Connect the S-Video or video (yellow color) terminal from the rear of your DVD player to the S-V ideo or video (yellow color) terminal in the A V IN on the rear of your RPTV .
11 Connecting your DVD Player Using Component Videoo 1. T urn off the power to the RPTV and DVD player . 2. Connect the PR or CR (red color) connector from the rear of your DVD player to the PR/CR (red color) connector in the COMPONENT IN 1 on the rear of your RPTV .
12 Connecting your GAME CONSOLE or CAMCORDER Using S-Video 1. T urn off the power of the RPTV and GAME CONSOLE or CAMCORDER. 2. Connect the S-Video terminal from your GAME CONSOLE or CAMCORDER to the S-V ideo terminal in A V IN 3 on the right side of your RPTV .
13 Connecting Y our Computer Using PC INPUT 1. T urn off the power of the RPTV and Computer . 2. Connect a VGA cable from the VGA CARD of your computer to the PC input in the rear of your RPTV . 3. Connect the Audio Out mini-jack from your computer to the VGA Audio ( L/R ) from the rear of your RPTV .
14 Computer Compatibility Chart Computer Multiple signal support Horizontal Frequency: 15-60 kHz, V ertical Frequency: 45-85 Hz, Pixel Clock: 12-80 MHz Sync signal: Compatible with TTL level Compatibl.
15 Using the Center Channel Input Y ou can use the RPTV speakers as a center speaker when using 5.1ch surround sound system. 1. T urn off the power of the RPTV and audio equipment which supports 5.
16 Using the Audio Output These terminals are used for connecting a stereo amplifier for Digital TV Audio Signals only . They relay (pass- through) the audio signals of all DTV programs displayed on the RPTV screen.
17 Side Control Section POWER Switch the TV on by pressing the "" POWER button once. T o turn "off" the TV press the POWER button twice; the first time the button is pressed a message will appear on the screen warning that the second button press will power-off the TV .
18 Status LED Front Panel Indicator READY LED Displays the status of the ready of your RPTV . POWER LED Lights green when powered on. Remote Control Sensor Point the Remote Control here as this is the window through which all of the remote signals pass to reach the remote sensor .
19 Remote Control Key Functions The Remote Control is a comprehensive remote that can be used to control up to eight different components. For ease of use with minimal room lighting the Remote Control has a back light that illuminates all of the buttons when any button is pressed.
20 VIEW MODE (WITH VIDEO) STRETCH 16:9 SIDE BAR 4:3 S.STRETCH ZOOM VIEW MODE (WITH PC) NORMAL STRET CH 16:9 DOT BY DOT ZOOM EXIT Exit the OSD, component or menus. Use these buttons to navigate the OSD menus. SEL Confirm an action on each menu item. and Select the main or sub (PIP) window to activate.
21 PIP T urn on or off the PIP (Picture In Picture) or POP (Picture On Picture) mode. PIP MODE AUDIO Selects audio effect mode. MTS Selects stereo, sap and mono sound mode when input source is TV . CC T urns closed captioning "on" and "off".
22 Remote Control Operation CAUTIONS : Using the PIP Feature on the Remote Control Press the PIP button on the Remote Control to activate the PIP (Picture-In-Picture) mode. The PIP (sub screen) window will appear on the screen superimposed on the main screen.
23 Remote Control Operation 1. Make sure that the component is turned on. 2. Press and hold the SETUP button on the Remote Control until the LED flashes twice.
24 Menu Functions PICTURE ADJUST Y ou can adjust the settings of the PICTURE( CONTRAST , BRIGHTNESS, COLOR, TINT , SHARPNESS, COLOR TEMP , NOISE REDUCTION, VIEW FORMA T .) AUDIO ADJUST Y ou can adjust the AUDIO settings (TREBLE, BASS, BALANCE, EFFECT) for the internal SPEAKERS.
25 Using the On Screen Display (OSD) Menu Operations The OSD consists of a Main Menu of items and each of these items has a Sub Menu associated with it that the OSD will switch to when the item is selected. 1. Press the MENU button on right side of the RPTV or remote control : The Main Menu will be displayed on the screen, as shown below .
26 PIP SETUP PIP STYLE - T urns PIP mode on or off, or choose four of the following pre-set modes: PIP , SPLIT , POP , OFF . PIP - Start the Picture in Picture and option sub function. SPLIT - The screen is divided in half. The left side is the main picture and the right side is the sub-picture.
27 AUDIO (DTV) AUDIO 1. LANGUAGE STEREO - Y ou can choose any language or any sound effects on this option. AUDIO SETUP - Y ou can setup your Digital Audio Output. Sound effects to DOLBY DIGIT AL or PCM. TV TUNER SETUP - Sets AIR/CABLE antenna option first and you can select channel search by auto or manul.
28 12. Press the SEL button to open the "TV RA TING" Menu. 13. Press the buttons to select which rating you want to block or unblock. Y ou can select from the following ratings : TV -Y (all .
29 Setting a Password for Parental control Y ou control access to the Parental Control features with a password. The default password is 0000. Y ou can change the password to any four-digit number . T o change the password: 1. Press the TV button on the remote control.
30 Using Wide Modes: V iew Mode Wide screen mode allow you to change the aspect ratio on screen. Y ou can press the Aspect button on the REMOTE CONTROL to change the aspect ratio on screen. Press Aspect 1. The V iew mode message displays. 2. The menu lists the Aspect options selectable for the type of video signal currently received.
31 Replacing the Lamp The projection lamp has a limited life which illuminates the picture. If the screen becomes dark, the color looks unusual, or the Lamp LED indicator on the front of the RPTV lights the screen shows message of "PLEASE REPLACE THE LAMP", it is time to replace the lamp with a new one (not supplied).
32 Replacing the Lamp When the "Lamp Replacement" warning appears on screen it is time to replace the lamp. (Lamp LED warming light will appear red). Press OK to make the warning disappear "" . After replacing the lamp please reset the lamp timer .
33 T roubleshooting Guide Use the following information to solve common problems. Symptom Possible Solutions No picture Make sure that the power cord is plugged into a grounded electrical outlet. Make sure that the Power button is turned on. Look in the left air vent to see if the lamp is on.
34 Symptom Possible Solutions Screen brightness is diminished. V ideo display components experience degradation of brightness over the life of the component. Normal brightness degradation is not covered by the warranty . Check brightness setting Check lamp timer Replace lamp The LED on the Remote Control does not blink when a button is pressed.
35 Specifications Optical System T exas Instruments HD4 DLP DMD TM Screen size 51 inches Diagonally Channel Coverage VHF 2-13 UHF 14-69 DTV 1-999 CA TV 2-125 Lamp UHP AC 120W T elevision System NTSC A.
36 Dimension UNIT : inch/[mm] 27.94 [709.80] 47.47 [1205.80] 35.23 [894.80] 16.53 [419.80].
37 Input / Output T erminals and Connectable Equipment A V IN1, A V IN2 TERMINAL Connecting video equipment with A V output terminal (DVD player , etc.). (See page 8) COMPONENT IN1, IN2 TERMINAL Connecting video equipment with Component output terminal (DVD player , STB etc.
38 APPENDIX: Remote Control IR Set Up Codes TELEVISION codes Addison 10092 Admiral 10093, 10463 Advent 10761, 10842 Aiko 10092 Aiwa 1 1914 Akai 10812, 10702, 10030, 10672, 1 1903 Albatron 10700, 10843.
39 Fujitsu 10809, 10853 Funai 10180, 10171, 1 1904 Furi 10145 Futuretech 10180 Gateway 1 1756, 1 1755 GE 1 1447, 10047, 1 1454, 10051, 10451, 10180, 10030, 10178, 1 1917, 10092, 1 1907, 1 1922 Gibralt.
40 Mitsubishi 10154, 10250, 10093, 10236, 10180, 1 1250, 10150, 10030, 10178, 1 1917, 10836 Monivision 10843, 10700 Motorola 10093 MTC 10060, 10030 Mudan 10051 Multitech 10180 NAD 10156, 10178, 10866 .
Sowa 10156, 10051, 10060, 10178, 10092 Squareview 10171 41 SSS 10180 Starlite 10180 Studio Experience 10843 Supreme 10000 SV A 10748, 10865 Sylvania 10054, 10030, 10171, 1 1944, 1 1931 Symphonic 10180.
42 Bell & Howell 20104 Broksonic 20184, 20121, 20209, 20002, 20479 Calix 20037 Canon 20035 Carver 20081 CCE 20072, 20278 Changhong 20048, 20081 Citizen 20037, 20278 Colt 20072 Craig 20037, 20047, .
43 Memorex 20035, 20162, 20037, 20048, 20039, 20047, 20240, 20104, 20209, 20479 MGA 20240, 20043 MGN T echnology 20240 Microsoft 21972 Mind 21972 Minolta 20042 Mitsubishi 20067, 20043 Motorola 20035, .
44 T echnics 20035, 20162 T eco 20035, 20037, 20048, 20038 T eknika 20035, 20037 T ivo 20636, 20618, 21503, 20739 TMK 20240 T oshiba 20045, 20042, 20067, 20043, 21503, 21008, 21972 T otevision 20037, .
45 Koss 20651, 21980 Lasonic 20798 LG 20591, 20869, 20801 Liquid Video 21980 Lite-On 21 158, 21058 Loewe 2051 1 Magnavox 20503, 20539, 21976, 21914, 20675 Marantz 20539 Memorex 20695 Microsoft 20522 M.
46 ClearMax 00883 Coolmax 00883 Daeryung 01877, 00877, 00477, 00008 Digi 00637 Director 00476 Dumont 00637 Gehua 00476 General Instrument 00476, 00810, 00276, 00003, 00014 GoldStar 00144 Hamlin 00009,.
47 GE 00566 General Instrument 00869 GOI 00775 Goodmans 01246 Hisense 01535 Hitachi 00819, 00222, 01250 HTS 00775 Hughes Network Systems 01 142, 00749, 01749, 01442 I-Lo 01535 JVC 00775 LG 01414, 0122.
48 CD Players codes Aiwa 30157 Burmester 30420 California Audio Labs 30029 Carver 30157, 30179 Denon 30873 DKK 30000 DMX Electronics 30157 Dynamic Bass 30179 Fisher 30179 Garrard 30420 Genexxa 30032 H.
49 ADC 30531 Aiwa 31405, 31243, 30121 Anam 31609, 31074 Audiotronic 31 189 Bose 31229 Capetronic 30531 Carver 31 189 Coby 31263 Denon 31360, 31 142, 30904 Fonmix 31360 Glory Horse 31263 Harman/Kardon .
50 Index A AMP button(Remote Control) ------------------------ 18 AUDIO --------------------------------------------------------- 24, 26 AUDIO (DTV) ----------------------------------------------- 26 .
51 MUTE button (Remote Control) --------------------- 19 NEW SECRET NO . --------------------------------------- 27 NOISE REDUCTION ------------------------------------- 25 Normal --------------------.
www .vivitekcorp.com.
Ein wichtiger Punkt beim Kauf des Geräts Vivitek 51" Micro Display Projection TV (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Vivitek 51" Micro Display Projection TV noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Vivitek 51" Micro Display Projection TV - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Vivitek 51" Micro Display Projection TV reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Vivitek 51" Micro Display Projection TV erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Vivitek 51" Micro Display Projection TV besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Vivitek 51" Micro Display Projection TV verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Vivitek 51" Micro Display Projection TV. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Vivitek 51" Micro Display Projection TV gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
