Benutzeranleitung / Produktwartung DP-1200 X des Produzenten Vivitar
Zur Seite of 41
DP - 1200X Digital Projector User Manual English 030531.
EN-1 . English . User’s Manual Projector FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in commercial installation.
EN-2 User’s Manual Projector Precautions Safety Instructions 1. Check that the operating voltage of your unit is identical with the voltage of your local power supply. 2. Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it further.
EN-3 . English . User’s Manual Projector Cautions The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust). Do not block or place anything near these slots, or internal heat build-up may occur, causing picture degradation or damage to the projector.
EN-4 User’s Manual Projector CONTENTS Projector Features and Controls Projector Control Panel Remote Controller Button Function Getting the Most Out of Your Projector Remote Controller Auto Off Mode.
EN-5 . English . User’s Manual Projector Audio Menu MISC Menu Option Menu Language Menu Reset Menu Other Related OSD Menus Video Input Signal Picture Menu Video Menu Other OSD Menus No Input Signal .
EN-6 User’s Manual Projector PROJECTOR FEATURES AND CONTROLS PROJECTOR 1.Zoom ring 2.Focus ring 3.Lens 4.Ventilation holes (intake) 5.Ventilation holes (exhaust) 6.Adjuster button 7.Height adjustment 8.Front IR remote controller sensor 9.Speakers 10.
EN-7 . English . User’s Manual Projector CONTROL PANEL LED POWER Power LED indicator – indicates power to projector. LAMP Lamp LED indicator – indicates lamp power. Button Function Turns the projector and lamp ON and OFF. INPUT Manually selects an input source.
EN-8 User’s Manual Projector REMOTE CONTROLLER Button Function POWER Turns the projector and lamp ON and OFF. INPUT Manually selects an input source. AUTO Automatically adjusts frequency and phase. MENU Displays (or hides) the on-screen display menus.
EN-9 . English . User’s Manual Projector GETTING THE MOST OUT OF YOUR PROJECTOR The projector has a full set of features that allow you to control the settings for video, audio, power management, display parameters, and much more. To derive the greatest utility from your projector, read this section for a quick summary of the important features.
EN-10 User’s Manual Projector SETUP This section tells you how to unpack and set up your projector and connect it to other equipment. The projector must be connected to a computer or a video source such as a video tape deck, camcorder, digital camera or laser disk player in order to make a projection.
EN-11 . English . User’s Manual Projector Setting Up the Projector 1.Place the projector on a sturdy, level surface within five feet of the computer or video source. Caution: Do not hold the projector by the lens. This can damage the lens. 2.Place the projector the correct distance from the screen.
EN-12 User’s Manual Projector Connecting to a Computer The projector will always project at XGA (1024 x 768) resolution. (XGA is the native resolution of the projector.) However, you can connect the projector to a computer source capable of displaying VGA (640 x 480), SVGA (800 x 600), XGA or SXGA (1280 x 1024) resolutions.
EN-13 . English . User’s Manual Projector Connecting to a Video Source You can connect the projector to almost any common video source - VHS player, DVD player, camcorder, laser disc player or any other compatible video image source.
EN-14 User’s Manual Projector Using the Projector This section describes projector operations: Turning the projector and A/V equipment on and off Adjusting the projected image Projector controls Che.
EN-15 . English . User’s Manual Projector Focusing and Positioning the Screen Image After an image appears on the screen, check to see if it is in focus and whether it fits properly on the screen. To adjust the focus of the image, rotate the focus ring, which is the right one on the projector’s lens.
EN-16 User’s Manual Projector Operational Indicator (LED) There are two LEDs on the top of the projector, the Power LED and the Lamp LED. They provide valuable information about the projector. LED TYPE COLOR STATUS MEANING Power LED Green Solid The projector is powered and ready.
EN-17 . English . User’s Manual Projector 2.Selecting the desired menu or sub-menu(to scroll through the menu choices): On the Projector Control Panel: press the or button. On the Remote Controller: press the or button.
EN-18 User’s Manual Projector Menu Options The projector is equipped with three types of on-screen display(OSD) menus. Each OSD menu interface you will see on the screen is depending on the type of input signal.
EN-19 . English . User’s Manual Projector Input Menu This menu allows to specify the signal source that you wish to project. This is particularly useful if you have several sources (video and/or computer) connected to your projector. Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.
EN-20 User’s Manual Projector Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.Press the MENU button to display OSD menu. 2.Press the or button to select PICTURE menu.
EN-21 . English . User’s Manual Projector Color Menu This menu provides precise control of the color settings including: color temperature (preset & user define) and gamma. Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.
EN-22 User’s Manual Projector PIP Menu This menu enables you to adjust the PIP (additional video image window on the graphics background) settings such its size, position (horizontal & vertical), brightness, contrast, saturation, tint, sharpness and source selection.
EN-23 . English . User’s Manual Projector The following table provides detail of the available sub-menu choices: Sub-Menu Option Description Size Sets the PIP size. O f f No additional image window on the screen. Small Additional image window size sets to small.
EN-24 User’s Manual Projector Audio Menu This menu allows you to control volume and mute(on/off) the audio. Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.Press the MENU button to display OSD menu.
EN-25 . English . User’s Manual Projector 3.To enter the sub-menu setting, press the MENU button once again. 4.Press the or button to select the sub-menu item. 5.Press the or button to adjust the value of desired sub-menu item.
EN-26 User’s Manual Projector 4.Press the or button to select the sub-menu item. 5.Press the or button to adjust the value of desired sub-menu item.
EN-27 . English . User’s Manual Projector Language Menu This menu enables you to select the language used in the OSD(on-screen display) menus. Changing settings procedure (using either the Projector Control Panel or the Remote Controller): 1.Press the MENU button to display OSD menu.
EN-28 User’s Manual Projector Other Related OSD Menus Following are the descriptions on the on-screen display menus with video input sources and without input source attached to your projector.
EN-29 . English . User’s Manual Projector The following table provides detail of the available sub-menu choices: Sub-Menu Description Brightness The higher the setting, the brighter the image. The lower the setting, the darker the image. Contrast The higher the setting, the greater the contrast.
EN-30 User’s Manual Projector The following table provides detail of the available sub-menu choices: Sub-Menu Option Description Aspect Ratio HDTV and video display selection. 16:9 Selects 16:9 aspect ratio. 4:3 Selects 4:3 aspect ratio. Source Video format selection.
EN-31 . English . User’s Manual Projector No Input Signal If there is no input signal attached with your projector, if you press the MENU button (on either the Projector Control Panel or the Remote Controller), one of the following on-screen display menus will appear on the screen.
EN-32 User’s Manual Projector MAINTENANCE The projector needs little maintenance. You should keep the lens clean as dust, dirt or spots will project on the screen and diminish image quality. You will also need to clean the air filter located at the bottom of the projector periodically.
EN-33 . English . User’s Manual Projector Cleaning the Air Filter The air filter, which is located at the bottom of the projector, should be cleaned after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust and prevent the projector from being ventilated properly.
EN-34 User’s Manual Projector Replacing the Lamp The projector lamp used for the light source has a certain life. It is time to replace them lamp when: When lamp dims, the projected image gets darker or starts to deteriorate. The projector lamp LED indicator turns to red (See page 16).
EN-35 . English . User’s Manual Projector TECHNICAL SPECIFICATIONS Projection System 3 panel 0.7 inch LCD projector Resolution (Pixels) 1024 x 768 (786,432 dot x 3) Image Brightness 1300 ANSI Lumen (Typical) Uniformity 85% Lens Manual Zoom (1.3X) Focal Length 21.
EN-36 User’s Manual Projector APPENDIX A Preset Signals Preset signal fH (kHz) fV (Hz) Sync Size Video 60 Hz 15.734 59.940 Video 50 Hz 15.625 50.000 Component 60 Hz 15.734 59.940 S on G/Y or Composite Sync Component 50 Hz 15.625 50.000 S on G/Y or Composite Sync 640 x 350 VGA mode 1 31.
EN-37 . English . User’s Manual Projector Preset Signals Horizontal Vertical Active fH(kHz) fV(Hz) Active Pixel Pixel 480p 720 480 31.469 59.940 720p 1280 720 45.
EN-38 User’s Manual Projector Control port USB port Projector Computer Mouse cable (for USB) Mouse cable (for PS/2) Control port PS/2 port Projector Computer Mouse Cable Mouse Cable Monitor OUT cabl.
EN-39 . English . User’s Manual Projector Connecting the HDTV (data) OUT Audio Cable Audio OUT HDTV to DVI Cable Green,Blue,Red HDTV IN OUT OUT IN Projector IN OUT Computer Computer Cable DVI or VGA.
EN-40 User’s Manual Projector Connecting to a Video Source (S-Video, Component, Composite) S-Video Cable AV Composite Cable R/W Y Cb Cr (Component Video Cable) DVD Player Video out VCR IN OUT Y OUT .
Ein wichtiger Punkt beim Kauf des Geräts Vivitar DP-1200 X (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Vivitar DP-1200 X noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Vivitar DP-1200 X - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Vivitar DP-1200 X reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Vivitar DP-1200 X erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Vivitar DP-1200 X besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Vivitar DP-1200 X verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Vivitar DP-1200 X. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Vivitar DP-1200 X gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
