Benutzeranleitung / Produktwartung Universal SL-8000 des Produzenten Universal Remote Control
Zur Seite of 52
Home Theater Master Home Theater Master Universal Remote Contr Universal Remote Contr ol ol.
A. To Open and Close Battery Compartment Cover 3 B. Low Battery Message 3 A. Function Table Reference 4 Function Tables 5 B. Preprogrammed Set Up 8 Three Digit Code Method 8 Auto Search Method 10 Recalling the Set Up Code Number 12 C. Operation 13 Device Buttons 14 Main Device Mode 15 Automatic Audio Mode 15 Backlighting 16 A.
The Home Theater Master SL-8000 remote contr ol is prepr ogrammed to operate over 1,000 Audio and V ideo components so that you can set it up by simply punching in a three digit code number that matches your equipment.
This remote contr ol uses four AAA 1.5 V batteries. Please be sure to match the batteries with the (+) and (–) markings inside the battery compartment during installation. T o open the battery cover , push the latch forward toward the top of the remote contr ol, and lift the latch up.
1 10 12 13 14 15 11 21 23 22 24 16 17 18 19 20 9 23 4 25 26 27 37 51 52 53 54 38 28 29 30 31 32 33 39 40 35 41 43 44 45 42 41 43 44 45 42 46 48 49 50 47 34 55 36 5 67 8 Using Y our Remote POWER MUTE T/ V VOL CH PAUSE STOP PLAY SEL F . F R E W GUIDE MENU EXIT PRE.
Using Y our Remote SA T Functions SA T (ON) On/Off (OFF) Mute TV/SA T V ol Up V ol Down Ch. Up Ch. Down Up Down Right Left Select Guide Menu Exit/Cancel Prev . Ch. 1—0 Enter Fav Info/Fetch Next Prog. Alt. Audio Rec. TV Functions TV (ON) On/Off (OFF) Mute TV/V ideo V ol Up V ol Down Ch.
No. Button Name 1-8 Device Name 9 Power 10 Mute 1 1 T/V Input 12 VOL Up 13 VOL Down 14 CH Up 15 CH Down 16 Up/Pause 17 Down/Stop 18 Right/F .F . 19 Left/Rew 20 Sel/Play 21 Guide/I<< 22 Menu/>>I 23 Exit/Rec 24 Pre. Ch./Eject 25-34 1—0 35 10+ 36 Enter/Shift 37 Fav/Sleep 38 Info/Pro.
CD Functions CD (ON) On/Off (OFF) Mute/Fader Random V ol Up V ol Down T rack +/Skip + T rack-/Skip - Pause Stop FF/Search + REW/Search - Play Search - Search + Eject/Intro 1—0 Plus 10 Disc Program D.
The Home Theater Master universal remote contr ol can operate up to eight separate audio and video devices (equipment) . T o program the r emote control for your devices, please use the following steps: T urn on the device you would like the remote contr ol to operate, either manually or with your original remote control.
Note: SET appears in the LCD for 20 seconds to indicate that the remote contr ol is ready to be pr ogrammed. The following steps must be entered while SET appears in the LCD.
Please use this method if none of the Set-Up Code numbers worked for your device during the standard set-up pr oce- dure or if the manufactur er or brand for your device is not listed in Set-Up Code T ables . T urn on the device you would like the remote contr ol to operate, either manually or with your original remote control.
If you pass the correct Set-Up Code number , you can return to it by pressing the CHANNEL DOWN button, one Set-Up Code number at a time, until your device turns back on. Note: During programming, the signal for POWER ON and POWER OFF is located on the MUTE button.
T o display the three digit Set-Up Code number that was stored for a device. Press the Device Button and the MUTE button, simultane- ously . SET will appear in the LCD. Press the T/V button. The LCD will quickly flash the three digit Set-Up Code number that was stor ed for your device in that mode.
After you have programmed the r emote control for your equipment, use the following procedur es to operate your home entertainment system: Press the Device Button that you wish to operate: e.g. to operate a TV , pr ess the TV Device Button ; to operate a VCR, press the VCR Device Button , etc.
Any press of a Device button at the top of the r emote contr ol can perform the following functions: Changes the Device mode on the SL-8000 remote contr ol. Sends out a prepr ogrammed POWER ON command for a Device, if applicable. Sends out a joined selection.
Please use the following listing to locate the correct Set-Up Code T ables for your equipment: Audio Receivers, Preamplifiers, Surround Processors DSS, Primestar , DBS, Echostar , C Band receivers TVs.
Punch Through Advanced feature that enables you to operate V olume, Channel or T ransport Control functions of one device while in another mode. Set-Up Code Number The three-digit number that is used to pr ogram the remote control for your particular manufactur er or brand of audio/ video equipment.
Press the ENTER button. SA VE will flash twice and the LCD will return to AUDIO indicating that the joined function has been stored. Every time that the Device button is pressed it will also emit the joined function. To erase a joined function from a Device button: Press the AUDIO and ENTER buttons simultaneously on the remote contr ol.
After you set-up the remote control to operate your equipment, you can also program advanced features on the remote control. The advanced features are designed to enhance the use of the remote control with your home entertainment system.
Cursor Control Buttons that correspond to the UP , DOWN, LEFT , RIGHT , SELECT , GUIDE, MENU and EXIT functions of your audio/video equipment. Device Audio or video equipment, e.g. T elevision, VCR, Cable box, Audio receiver , Satellite receiver , etc.
Model SL-8000, infrared r emote control. Power Four 1.5 V AAA Batteries. Dimensions (h/w/d) 8.88 x 2.5 x 1.25 inches Weight 6.5 oz. (with batteries) The Home Theater Master SL-8000 remote contr ol comes with a one-year warranty from the date of pur chase.
Select the mode that you want to turn off the V olume Control “Punch Through.” Press the corr esponding Device Button and the MUTE button simultaneously . SET will appear in the LCD. Press the VOLUME UP button. PUNCH will appear in the LCD. Press the Device Button again.
Press either the SA T Device Button to set-up for SA T Channel Control or the CBL Device Button to set-up for Cable Channel Control . Either SA T or CBL will flash in the LCD, depending on the Device Button selected. SA T or Cable Channel Controls will now override the original CHANNEL UP and DOWN in this mode.
Advanced Features Y our device will turn off when the corr ect Set-Up Code number has been selected. If it does not turn off, select the next Set-Up Code number fr om the table, and pr ess in that code number . When your device turns off, proceed to Step 6.
A_TV A_VCR A_CAB A_SA T AUDIO A_CD A_DVD A_AUX A_TV2 A_VC2 A_TUN A_AM1 A_AM2 A_T A1 A_T A2 A_WEB A_SUR A_DA T A_PRJ A_AX2 A_LD A_A2 A_LIT A_DSS A_A V A_T AP A_DAB This feature is used to pr ogram the remote contr ol for two or more TVs, VCRs, etc., or to pr ogram a device into a mode with a differ ent Device Button name.
Y ou can set-up your remote contr ol so that VCR or CD T ransport Controls (PLA Y , STOP , F AST FOR W ARD, REWIND, P AUSE, and RECORD) will also operate in other modes on the remote contr ol.
The VCR or CD T ransport Controls ( PLA Y , STOP , F AST FOR W ARD, REWIND, P AUSE, and RECORD ) will now override the original functions of the buttons in this mode. Select the mode that you want to turn off the T ransport Control “Punch Thr ough.” Press the corr esponding Device Button and the MUTE button simultaneously .
T wenty-seven differ ent LCD displays can be selected for each Device mode of the remote contr ol. T o select an alter- nate LCD display , please use the following procedur e: Press and hold the Device button for which you would like to change the LCD setting.
Select the mode (AUD or SA T) in which you want to erase the Memory Button . Press the corresponding Device Button (AUD or SA T) and MUTE button, simultaneously . SET will appear in the LCD. Press the Memory Button to be erased. M(1-5)_# # will appear in the LCD.
There ar e five memory buttons (M1~M4, Power) that are designed to store up to 15 commands in each button. Pressing any one of the memory button will send out the series of commands that are stor ed in the button.
• Macro Commands: Memory Buttons can store and emit up 15 commands including multiple Power On/Off sequences. Note: The MUTE buttons is used to designate POWER com- mands during Memory Button programming. See the Example: Memory Button Programming for further description.
Select the section that you wish to program the Memory Button in by pressing the corr esponding Device Button (AUD, or SA T) and MUTE button, simultaneously . SET will appear in the LCD. Press one of the Memory Buttons (M1, M2, M3, M4, or POWER) into which you wish to store the functions.
No IR commands are emitted during the second press of a Device button when the remote is in the Automatic Audio mode. Pressing the Device button again will return the remote to the Main Device Mode. To Delete the Automatic Audio for a Device mode: Press and hold the AUDIO Device button and the LIGHT button simultaneously .
Manufacturer/Brand Set-Up Code Number 3M 15 2 AIW A 015 071 100 1 14 164 ARCHER 155 AUTON 191 CAR VER 006 008 027 024 036 DENON 105 227 229 DMX 156 DRAPER SCREEN 204 DWIN 080 EVERQUEST 206 EXTRON 151 .
Manufacturer/Brand Set-Up Code Number REGAL 049 050 REGENCY 057 SAMSUNG 030 SCIENTIFIC A TLANT A 003 01 1 041 042 043 045 046 SIGNAL 030 SIGNA TURE 103 SL MARX 030 SONY 096 SPRUCER 047 078 ST ARCOM 00.
Manufacturer/Brand Set-Up Code Number ABC 103 003 004 039 042 046 053 AMERICAST 099 ANTRONIX 014 ARCHER 005 007 014 BELL SOUTH 099 CENTURION 092 CENTUR Y 007 CITIZEN 007 COMBANO 080 081 COMSA T 074 CO.
Manufacturer/Brand Set-Up Code Number THOMAS 034 TMK 006 TOSHIBA 008 013 042 047 059 079 082 1 12 131 081 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 141 V.
Manufacturer/Brand Set-Up Code Number MITSUBISHI 013 020 045 046 051 059 061 142 151 049 MTC 034 040 MUL TITECH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054 ORION 025 P ANASONIC 066 .
Manufacturer/Brand Set-Up Code Number AIW A 034 161 AKAI 016 043 046 124 125 142 146 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 023 039 043 BROOKSONIC 035 037 129 CANON 028 031 CAPEHAR T 108 CRAIG 003 040 .
Manufacturer/Brand Set-Up Code Number SAMPO 197 058 004 SAMSUNG 004 050 089 101 105 127 143 160 SANYO 166 007 020 053 057 082 187 SCOTT 004 028 043 048 143 SEARS 015 030 004 007 028 057 143 094 160 08.
Manufacturer/Brand Set-Up Code Number JCPENNY 197 004 008 009 024 030 065 101 143 156 160 JENSEN 013 JVC 034 038 070 083 145 199 KEC 043 KENWOOD 197 070 KLOSS 002 059 KMC 143 KTV 197 043 143 154 LODGE.
Manufacturer/Brand Set-Up Code Number 38 Set-Up Code T ables TV ADMIRAL 072 081 161 160 AKAI 197 146 AMARK 112 143 AMPRO 073 167 AMSTRAD 052 ANAM 043 054 056 080 112 131 AOC 197 004 1 12 058 AUDIOVOX .
Manufacturer/Brand Set-Up Code Number PROSA T 072 PROSCAN 151 106 150 RCA 151 106 150 REALISTIC 043 074 SAMSUNG 123 SA TELLITE SER VICE 028 035 047 085 SONY 103 ST ARCAST 041 SUPERGUIDE 020 124 125 TE.
Manufacturer/Brand Set-Up Code Number ALPHAST AR 123 AMPLICA 050 BIRDVIEW 129 1 13 051 126 BSR 053 CAPETRONICS 053 CHANNEL MASTER 013 014 015 018 036 055 CHAP ARRAL 008 009 012 077 CITOH 054 CUR TIS M.
Manufacturer/Brand Set-Up Code Number 33 Set-Up Code T ables Audio ADC 007 ADCOM 082 092 225 161 269 AIW A 018 104 170 202 203 213 21 1 188 AKAI 138 189 AMC 125 126 127 128 258 AMEND 054 AMX 196 ANGST.
Manufacturer/Brand Set-Up Code Number 34 Set-Up Code T ables Audio JEFF ROWLAND 206 JENSEN 058 JVC 240 163 191 1 14 266 KENWOOD 026 066 145 146 181 190 197 192 182 199 151 222 180 005 KINERGETICS 220 .
Manufacturer/Brand Set-Up Code Number 46 Set-Up Code T ables CD ADCOM 062 042 AIW A 059 065 088 089 105 122 170 187 AKAI 085 195 202 AMC 231 232 AMEND 118 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165.
Manufacturer/Brand Set-Up Code Number 47 Set-Up Code T ables CD MITSUMI 153 MODULAIRE 182 MONDIAL 147 NAD 006 005 067 178 NAKAMICHI 217 218 219 095 NEC 014 062 NIKKO 046 NSM 044 107 ONKYO 030 038 039 .
Manufacturer/Brand Set-Up Code Number 50 Set-Up Code T ables AUX RUSSOUND 081 SANSUI 027 1 13 1 19 224 SCIENTIFIC A TLANT A 163 156 SHARP 026 057 131 175 181 SHER WOOD 038 004 028 030 033 034 SIMA 082.
Manufacturer/Brand Set-Up Code Number 48 Set-Up Code T ables DVD DENON 007 206 207 080 FUNAI 120 GE 026 027 GOLDST AR 057 JVC 012 KENWOOD 152 013 MAGNA VOX 066 032 121 MARANTZ 21 1 MITSUBISHI 017 121 .
Manufacturer/Brand Set-Up Code Number 35 Set-Up Code T ables Audio SHER WOOD 024 038 055 102 103 105 106 051 030 SONY 018 093 223 247 248 160 166 015 101 184 218 271 SOUNDESIGN 036 SOUNDSTREAM 084 088.
OEE-0031V Rev . 1.
Ein wichtiger Punkt beim Kauf des Geräts Universal Remote Control Universal SL-8000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Universal Remote Control Universal SL-8000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Universal Remote Control Universal SL-8000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Universal Remote Control Universal SL-8000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Universal Remote Control Universal SL-8000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Universal Remote Control Universal SL-8000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Universal Remote Control Universal SL-8000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Universal Remote Control Universal SL-8000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Universal Remote Control Universal SL-8000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
