Benutzeranleitung / Produktwartung UH-052XR des Produzenten Uniden
Zur Seite of 28
UH-052XR Operating Guide.
➤ The UH052XR is splashproof* only when both the antenna and the battery are properly attached. ➤ Do not operate the transmitter of any radio equipment unless all the Radio Frequency (RF) connectors are secured and any open connectors are properly terminated.
Introduction Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 T echnical Support & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Included in your UH-052XR Package . . . . . . . . .
The UH-052XR is a splash proof, portable two-way UHF-CB radio. It is compact, rugged and fits easily in your hand. This hand held UHF radio will give you consistent, outstanding performance in virtually all conditions and situations.
TECHNICAL SUPPORT AND SERVICE Should you find it desirable or necessary to service your UH-052XR , we suggest you contact the Uniden dealer where you purchase your radio.
INCLUDED IN YOUR UH-052XR P ACKAGE 3 Note: If any of these items are missing from the box, contact your Uniden Dealer . Antenna AC Adaptor (AAD-052S) UH-052XR Wrist Strap Battery BP-052 (7.
A TT ACHING THE ANTENNA Attach the antenna to the UH-052XR following direction as indicated below . Be sure the antenna is firmly seated. A TT ACHING THE BA TTERY P ACK 1. Slide the battery pack onto the bottom of the radio. 2. Use a coin to turn the screw that connects the battery pack to the UH-052XR .
BA TTERY CHARGE INDICA TOR When charging, the CHG icon appears on the display . Note : 1. Transmit Operation is disabled when UH-052XR is being charged. 2. A single tone is emitted by the radio and CHG is displayed to indicate that it has started charging.
➤ When you press any key (except PTT), a short tone sounds. ➤ See the Controls and Indicators page at the back of this operating guide for button and key operations. POWER ON/OFF T o turn the unit ON , rotate the [ON/OFF VOL] clockwise until a “click” is heard.
SQUELCH The squelch is used to eliminate any annoying background noise when there are no signals present. Think of squelch as a gate. T urn [SQ] fully clockwise. This raises the ”Squelch Gate” so high that only the very strong signals can get through.
TO TRANSMIT AND RECEIVE The UH-052XR uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed at the end of this manual. 1. The maximum RF transmit power of UH-052XR is 5 watts. T o switch to low power , press the [1/5W] .
USING A REPEA TER CHANNEL UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions. In normal Simplex operation, your radio transmits on one particular frequency and receives on that same frequency .
TO OPERA TE UH-052XR IN DUPLEX MODE Eg. CH01 is being used in your area for repeater use. Press [DUP] momentarily . The DUP icon appears. Press [DUP] again to deactivate the duplex operation.
Note: 1. If SCAN is deactivated while in an active channel, the UH-052XR will stay on that active channel. If no other channels are active, the UH-052XR will reinstate the starting channel. 2. Pressing [CTCSS] for 1.5 Secs. Will deactivate Open Scanning and activate CTCSS Scanning.
Programming Scan Channels 1. Select which Scanning Mode you wish to use on the channel OS or GS Mode Note: OS is indicated by the absence of the GS icon 2. Select the channel you want to store by pressing [ ▲ ] or [ ▼ ] 3. Press and hold [MEM] for 1.
Programming CTCSS Code 1. Select a desired channel to be used with CTCSS . 2. Press and hold [CTCSS] for 1.5 secs. CTCSS icon blinks. 3. Press [ ▲ ] or [ ▼ ] to select the desired CTCSS code. 4. Press [CTCSS] to save the selected code. CTCSS icon stops blinking.
NOTE: VOX feature will not work without the Headset Microphone. Built in [PTT] of UH-052XR is temporarily disabled, however accidental pressing of [PTT] will cause the unit to transmit briefly . T o activate VOX 1. Press and hold [VOX] for 1.5 secs. “VOX” icon blinks.
➤ POWER SA VE Battery Save feature extends the battery life by switching the receiver circuit power ON and OFF . This feature automatically activates during stand by mode (RX mode without signal). A flashing icon will appear on the display when the battery save feature is ON.
➤ BUSY CHANNEL LOCK-OUT(BCL) This feature prevents accidental transmission on a busy channel. This is recommended on channels where CTCSS is being used. If the channel is “ active ” and the signal is coming from a non or different CTCSS code user the BCL feature will prevent you from transmitting.
➤ BA TTERY LEVEL DISPLA Y The icon in the top right hand corner of the screen indicates the UH-052XR current battery voltage level at all times. The battery level is displayed in 4 levels: LEVEL 4 B.
* Emergency calling for both simplex and duplex operation Please do not use this channel in non-emergency cases. # Back-up Emergency Channel Ch. Freq. Usage Ch. Freq. Usage 01 476.425 Simplex/Duplex 21 476.925 Simplex 02 476.450 Simplex/Duplex 22 476.
• Battery (BP-052) • VOX Headset (VM-052) • Speaker Microphone (SM-050) • AC Adaptor (AAD-052S) • Cigarette Lighter Charger (CL-050) • Battery Eliminator (BE-050) • Standard Headset Microphone (HM-050) OPTIONAL ACCESSORIES Code No. Freq.
General Channels T ransmit 40 (with Duplex Channel Support) Receive 40 Oper . T emp. 0 ˚ C - +55 ˚ C Antenna Flexible Whip Microphone Built-in Electret type Display Liquid Crystal Display Speaker 8 Ω 1 Watt Power Source BP-052 Rechargeable Nickel-cadmium Battery Pack 950mAh, 7.
Charger Std. Power Supply AAD-052S Input 230~240V AC, 50Hz Output 9V , 210 mA Approval No. V/00031 Specifications shown are typical and subject to change without notice.
UNIDEN UH-052XR UHF CB RADIO Australian One Y ear Warranty Note: Please keep your sales docket as it provides evidence of warranty . Warrantor: Uniden Australia Pty Limited ACN 001 865 498 Elements of.
DC9V CHG CTCSS BCL OFF VOL SQ MEM LOCK 1/5W OS/GS DUP SCAN MIC SPKR VOX CTCSS 2 3 1 4 5 7 8 UH-052XR 13 14 15 10 12 9 6 11 17 18 16 CONTROLS & INDICA TORS 23.
1. Antenna 2. Belt Clip 3. PTT (Push-to-talk) Switch 4. Monitor Switch 5. Charging Jack 6. Charging Jack Cover 7. Battery 8. Speaker 9. Lock Key 10. 1/5W Key 11. OS/GS and VOX Key 12. LCD Display 13. On/Off Volume Key 14. Squelch Key 15. Speaker Mic Jack Cover 16.
© 2000 Uniden Australia Pty Limited/Uniden New Zealand Limited Part Code UTZZ01872ZZ.
Ein wichtiger Punkt beim Kauf des Geräts Uniden UH-052XR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden UH-052XR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden UH-052XR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden UH-052XR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden UH-052XR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden UH-052XR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden UH-052XR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden UH-052XR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden UH-052XR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
