Benutzeranleitung / Produktwartung Maptrax GPS352 des Produzenten Uniden
Zur Seite of 35
GPS352 Owner ’ s Manual.
2 TM Table of Contents Introduction ...................................................................... 3 Features ........................................................................................ 3 Important Vehicle and Product Safety Information .
Congratulations on your purchase of Uniden’s GPS352 navigation device. This manual contains important information on how to safely use your GPS device in your vehicle. Please read this manual carefully and follow all safety instructions. Visit our web site at www.
GPS352 4 TM Getting Started What’s Included Check the contents of the box and make sure you have all of the following items. If any items are damaged or missing, please contact our customer service department (see back page).
LCD Touch Screen Go to Menu LCD Screen ON/OFF Zoom IN or Scroll UP Zoom OUT or Scroll DOWN Front Removeable Stylus Back Speakers Connector for Optional External Antenna Mounting Holes for Support Arm .
Left Right power audio Power ON/OFF Built-in GPS Antenna (extended) Audio OUT Supports standard 3.5 mm audio headphones. Turns the entire device on or off. Bottom volume 11 - 1 5 V D C DC Power Input Volume Control SD Card The SD Card must be installed for the mapping features to operate properly.
Step 1 Step 2 7 TM Installing the GPS Device in Your Vehicle Windshield Mounting When you install the device for the rst time, attach the device to the support arm before attaching the arm to your vehicle windshield. Note: Before attaching the suction cup, clean the inside of your windshield with a standard window cleaner and a lint-free cloth.
8 TM Permanent Dashboard or Console Mounting To mount the device on a rough surface, such as your dasboard or console, use the surface mount disk that came with your device. This disk permanently mounts in your car and provides a stable base for the suction cup mount.
9 TM Show the current map and location Go to the GPS status screen Change the device setup and user information. Battery charge indicator Using the Interface Using the Main Menu Screen When the device rst powers on, it displays the menu screen. To select any item on any screen, simply tap the item with your nger or the removeable stylus.
10 TM Zoom in on the map center Go to the Quick Find screen Zoom out from the map center Your current location (the map center) Using the Map Screen As soon as the device acquires a valid satellite signal, it switches to the Map screen. You will probably use this screen the most, so be sure you are familiar with its layout, icons, and options.
11 TM Changing the Map View Zooming In and Out The device has 8 zoom levels. One-half inch on the screen can equal 8 miles, 4 miles, 2 miles, 1 mile, 1/2 mile, 1000 feet, 500 feet, or 250 feet. Tap the plus button to zoom in to the next level and the minus button to zoom out.
12 TM Changing the Map Options To change the defaut map view and display options, from the Menu screen choose Setting and then Map Options. This opens the Map Options screen: Setting the Default Map V.
13 TM Showing a Breadcrumb Trail As you drive, the device can leave a trail of markers or “breadcrumbs” so you can retrace your route. This is useful if you are off-road or in an area where roads have changed since the latest map update.
14 TM Creating a Route You can plot a detailed route, including turn by turn directions, to any destination you choose. If you miss a turn or go off the route, the device can automatically recalculate the route from your current location. You can create and save 25 custom routes.
15 TM Entering an Address as Your Destination You can plot a route to any address in the US or Canada. Follow the steps below to enter address as your route destination: From the Menu screen, select Destination and then choose Address. This opens the address entry interface.
16 TM After you select a street, the Enter a House Number screen appears. This screen is almost the same as the Select a Street and Select A City screens, but it starts with the number pad instead of .
17 TM Reading the Route Screen Once your route is calculated, the device displays the route screen. The route screen is based on the Map Screen, with the following additonal information (all the contr.
18 TM Route Information and Current Route Options From the route screen, tap anywhere inside the map area to show the route information button: Tap the Route button to open the pop-up options: Select Info to open the Route Information screen: 1. 2. Saving a Route To save the current route, tap the Save button.
19 TM Avoiding Certain Roads If you prefer not to use specic roads for this particular route, select Avoid Roads. The Avoid Roads screen lists the all the roads and turn-by-turn steps used by the route: Tap anywhere on a line to select a road, then tap the Avoid button to remove the selected road from the calculations for this route only.
20 TM Using Other Destinations for Routing Entering an Intersection as the Destination Entering an intersection is very similar to address entry: From the Menu screen, select Destination and then choose Intersection. This opens the Find Intersection screen (The last state you entered is pre-loaded.
21 TM Selecting a Pre-Programmed Place as a Destination The device has over 2 million pre-loaded locations-- including airports, landmarks, hospitals, and hotels--that you can use as destinations. To use a pre-programmed place as a route destination, follow the steps below.
22 TM Using the Quick Find Feature The Quick Find feature lets you nd a location and gives you several options for that location. From the main map or main route screen, choose Find.
23 TM Finding a City Center To nd the geographical center of any city in the US and Canada, tap the Find button and then select City Center. The device prompts you to select a state and city, then it centers the map on the center of the city you select.
24 TM Using the Mark Menu When the map displays a Quick Find location, it shows the Mark menu on the right side of the screen. Choose whether to mark the found location as the destination of a route, as the origin of a route, or as a waypoint along a route.
25 TM Editing and Deleting Waypoints To change the order of the waypoints or to delete waypoints, from the route screen, tap the Route button and then select Edit. This opens the Edit Waypoints screen. The Edit Waypoints screen shows the waypoints for the route in the order you will stop at them.
26 TM Changing the Default Route Options You can change the options used for all routes. From the Menu screen, select Settings and then Route Options. This opens the Route Options screen. Route Priority: choose whether you prefer routes with the fastest travel time or the shortest travel distance.
27 TM Changing the Language The device supports English, Spanish, and French in both the display and the voice prompts. Follow the steps below to change the language: From the Menu screen, select Settings. On the Settings screen, select Language Selection.
28 TM Entering Your Home Location If you enter an address as your home location, the device will automatically create a route from your current location back home with just two taps on the screen. Follow the steps below to enter your home location: From the Menu screen, select Settings.
29 TM Customizing Your Display From the Menu screen, select Settings. On the Settings screen, select System Setup and then Display Setup. This opens the Display Setup Screen: Choose the default settings for screen brightness and opacity.
30 TM Setting Up Speed Alerts The device can sound an alert if you exceed a given speed for a designated amount of time. You can activate alerts if you exceed a particular road’s speed limit or if you exceed an overall maximum speed. Follow the steps below to set up alerts: From the Menu screen, select Settings.
Antenna connector power audio 31 TM Using an External Antenna Like any radio signal, your GPS signal reception may expeirence interference from tunnels, freeway “canyons”, and competing radio signals; some reective metallic window tinting can also interfere with signal reception.
32 TM Maintenance Updating Maps and Software Updated maps are available for additional cost through www.uniden.com . Instructions on how to update the software are available at the website. Battery Information This equipment contains a rechargeable Lithium Ion battery.
33 TM Using the GPS Status Screen The GPS status screen shows details about your device’s reception of the GPS satellite signals. You should only need to check this screen if you are having trouble getting a signal lock.
34 TM One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY : Uniden warrants, .
Declarations of Conformity and Compliance Trade Name: Uniden Model No.: GPS352 Responsible Party: Uniden America Corporation 4700 Amon Carter Blvd. Fort Worth, TX 76155, U.S.A. Phone (817) 858-3300 www.uniden.com This device complies with Part 15 of the FCC Rules.
Ein wichtiger Punkt beim Kauf des Geräts Uniden Maptrax GPS352 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden Maptrax GPS352 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden Maptrax GPS352 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden Maptrax GPS352 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden Maptrax GPS352 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden Maptrax GPS352 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden Maptrax GPS352 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden Maptrax GPS352. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden Maptrax GPS352 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
