Benutzeranleitung / Produktwartung 301 des Produzenten Uniden
Zur Seite of 32
GPS 301 GL OBAL POSITIONING SYSTEM.
i W ARNINGS & NOTIFICA TIONS THE GPS301 IS A GPS RECEIVER ONL Y & HA S NO RAD AR DETECTION CAP ABILITIES IT IS LEG AL TO USE THIS UNIT IN ANY AUSTRALIAN S T A T EO RN Z OPERA TION NOTICE OF GPS GPS signal reception can be affected by the location of satellites, tall buildings, tunnels, bridges, etc.
ii INST ALLA TION a. Avoid any position which may obstruct the deployment of any air bags or obstruct the drivers view . Place your GPS301 in a position where it has a good view of the sky above. Generally , the best location is in the centre bottom of the windscreen, which allows easy access to controls & view of the display .
INST ALLA TION b. i) Find the main unit and mounting bracket (with suction cups) in the main box/package. ii) The metal portion of the bracket locks into the top plastic portion of main unit.
INITIAL POWER ON DISPLAY GPS SPEED ACCURA CY w hen the power is turned on for the first time only , the unit may take up to 5 minutes to establish a satellite lock. During this period the unit must remain on. Future P ower On should only take a few moments.
1 C ONTENTS W arnings & Notifications...........................................................................i Quick Start Guide.....................................................................................ii Contents....................
2 FEA TURE HIGHLIGHTS EARL Y WARNING SAFETY SYSTEM - NA TIONWIDE COVERAGE GLOBAL POSITIONING SYSTEM (GPS) TECHNOLOGY TRIP COMPUTER ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 3 Stage visual and audible warning .
3 CONTROLS AND FUNCTIONS LEFT SIDE VIEW FRONT VIEW TOP VIEW (Example Display Shown) 1 Serial P ort 2 12 volt P ower Socket 3 ON / OFF V olume Control 4 Speaker 5 Satellite Status LED 6 Alert Status LE.
4 3 ST A GE SAFETY ALERTS Y our GPS301 has a pre-programmed memor y that will alert you to any speed camera, red light camera or black spot you are approaching. Example Level 1 Alert @ approx 800m Green Alert LED or scrolls on display No audible alert.
5 OPERA TION - MAIN MENU Key Layout F or General Operation Example: Speed Display; (Compass heading, speed) Display Key - F rom any Menu you may return to the start display by pressing or press to return to the previous menu.
6 MARK LOCA TION QUICK ACCESS LOCA TION Mark location is used to store in memor y your current location, which may be used in future as a point to navigate to. The Quick Access Locations are to mark your or locations. 1. Drive to a location you wish to mark and stop the vehicle.
7 MARK LOCA TION USER LOCA TIONS WITH NAME T AG User locations are used to store into memor y your current location, which may be used in future to navigate back to. Y ou may name each individual location. 1. Drive to a location you wish to mark as a user point and stop the vehicle.
MARK LOCA TION SELECT . DISPLAY NAVI SELECT SELECT 5. Scroll to and press 6. Y ou are now at the naming stage. Use Scroll to find desired letter . Press button to move one character space to the right or press button to move one character space to the left.
9 MARK LOCA TION ALERT POINT An alert point is a location you wish to store where a new Speed Camera, Red Light Camera or Black Spot has appeared which is currently not in the GPS301's memor y . 1. Stop as close as safely practical to the alert location.
OPERA TION FLOW PRESS 10 MARK LOCA TION EDIT NAME DELETE: USER POINTS Y ou may edit the names of previously stored user points. 1. Press 2. Scroll to and press 3. Scroll to and press 4. Scroll to the desired name and press Y ou can now edit the name of your user point using and buttons and scroll.
OPERA TION FLOW PRESS 11 MARK LOCA TION DELETE: ALERT POINTS 3. Scroll to , press SELECT . 4. Scroll to the name or . Press SELECT . 5. Press SELECT to confirm delete. Delete Del All This feature allows you to delete an alert point currently stored in your GPS301's memor y .
NAVIG A TION The navigation feature allows you to select a desired point to navigate to. The point (location) can be a pre-installed city or suburb, quick access location, user point or pre-installed P oint of interest. P .O .I. (Point of Interest)locations are currently unavailable but may be available in future updates.
NAVIG A TION NAVIG ATE TO CITY OR SUBURB Y ou may select a city or suburb to navigate to. Y our GPS301 contains an extensive list of cities and suburbs in Australia and NZ for you to choose from. 1. Press NA VI to navigation menu. 2. Scroll to , Press SELECT .
14 NAVIG A TION NAVIG ATE TO POINT OF INTEREST (POI) EXIT NAVIG ATE Y ou may select a point of interest group which will then allow you to navigate to the nearest location for that point of interest group. 1. Press NA VI. Scroll to , press 2. Scroll to desired POI, Press appears and navigation mode begins.
OPERA TION FLOW PRESS OPERA TION FLOW SPEEDS The speed feature allows you to view your average, maximum speeds for a journey . Y ou may reset the speed (trip computer) records to start a new journey .
OPERA TION FLOW PRESS OPTIONS The options feature gives you access to the following sections. Options 16 MENU Black Sp Speed Al SELECT Speed Ca Red Ligh POI Volu Download Speed Al Dimmer Baud Rat Unit.
OPERA TION FLOW PRESS Options MENU SELECT OPERA TION FLOW PRESS MENU SELECT Options Black Sp SELECT OPTIONS ALERT VOL UMES SPEED ALERT The alert volumes can be turned or 1. Press 2. Scroll to and press 3. Scroll to desired Alert. Press 3. Scroll to desired volume and press , 4.
OPTIONS DIMMER BAUD RA TE Y ou can select the brightness of the LED display (MID, HIGH or LOW) for you enter the Options-Dimmer menu. As a SHORTCUT , do the following: Press and buttons at the same time to rotate through the 3 dimmer states. Release the buttons when at the desired state.
OPERA TION FLOW PRESS OPTIONS UNITS The Unit Selection allows you to set either metric or imperial for speed and distance displays. 1. Press 2. Scroll to and press 3. Scroll to and press 4. Scroll to the desired unit selection. 5. Press to confirm. MENU.
OPERA TION FLOW PRESS OPTIONS DOWNLOADS Y ou must select this mode when the unit is connected via the serial cable to a PC or Laptop for downloading updates. The AC adaptor is used to power the GPS301 in a house when connected to a PC for downloading updates.
SELECT . SELECT . OPTIONS 3. T urn on your GPS301. 4. Press MENU. 5.. Scroll to and press 6. Scroll to and pres 1. Double click on the file Uniden GPS Uploader.exe. If an error message is displayed when you double click on Uniden GPS Uploader .exe then please check the serial cable connection and PC internet connection.
OPTIONS 22.
23 OPTIONS GPS RESET Y ou may reset the GPS Receiver if you have moved countries or traveled a long distance without the GPS 301 switched on. 1. Press 2. Scroll to options and press 3. Scroll to GPS Reset and Press Press again to confirm. The GPS Receiver will be reset and may take several minutes to obtain a satellite lock GPS - NMEA V er 3.
TROUBLESHOOTING If your GPS301 does not perform to your expectations, tr y the suggestions listed below . Unit does not operate: W eak detection. Beeps over bumps or rough road. The unit bounces against the windshield. Searching for Satellite. ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! Check the power cord.
ONE YEAR LIMITED W ARR ANTY IMPORT ANT : WARRANTOR: ELEMENTS OF WARRANTY : WARRANTY DURA TION: P ARTS COVERED: ST A TEMENT OF REMEDY: THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR P AYMENT OF INCIDENT AL OR CONSEQUENTIAL D AMAGES.
.
Printed in China USZZ01077ZA.
Ein wichtiger Punkt beim Kauf des Geräts Uniden 301 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden 301 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden 301 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden 301 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden 301 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden 301 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden 301 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden 301. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden 301 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
