Benutzeranleitung / Produktwartung 260 des Produzenten Uniden
Zur Seite of 28
Atlantis 260 Owner ’s Manual Atlantis 260CE.indd 1 6/3/08 4:50:53 PM.
Atlantis 260CE.indd 2 6/3/08 4:50:53 PM.
Contents Controls and Indicators ..................................................................... 2 LCD display ...................................................................................... 3 Warning! ....................................
2 1 Antenna 2 Belt Clip 3 Adaptor Jack 4 Battery 5 Battery Release Clip 6 PTT (Push to Talk) Key 7 Triple Watch Button ( TRI ) 8 Lock Button ( LOCK ) 9 TX Power Button ( 1/5W ) 10 Microphone 11 Speake.
3 A Transmit Indicator B TX Power Indicator C Channel Number Display D Memory Indicator E Scan Indicator F Battery Indicator G Triple Watch Indicator H Key Lock Indicator F H B C A D E G LCD Display Atlantis 260CE.
Warning! •The Atlantis 260 is splashproof only when the antenna, rubber caps (adaptor jack and speaker mic jack) and the battery are properly attached.
Introduction The Atlantis 260 is a splashproof, portable two-way VHF transceiver. It is compact, lightweight, rugged and fits easily in your hand. This handheld VHF marine radio will give you consistent, outstanding performance in virtually all conditions and situations.
Technical Support and Service Your Uniden dealer can provide you with sales assistance and information. If your marine radio does not perform properly, follow the troubleshooting tips in the back of this operating guide. The radio contains no user-serviceable parts.
Included in Your Package Cradle Beltclip Wrist Strap Rechargeable Battery Alkaline Battery Case (attached to the A TLANTIS 260) AC Adaptor DC Adaptor A TLANTIS 260 Antenna Owner's Manual/ Printed Material Mounting Screws Speaker Microphone SM078 7 Atlantis 260CE.
Getting Started Mounting the Cradle Mount the Cradle to either a counter or wall. To counter: Attach the Cradle using the mounting screws and washers as follows. To wall: Apply the Cradle to the wall and insert the two mounting screws into the larger holes of the Cradle Push down the Cradle until it is firmly seated.
Using the Alkaline Battery Case When needed, you can use the battery case with AA Alkaline batteries (not included) instead of the rechargeable battery pack. 3 Replace the battery case cover as follows until it clicks into place. Attaching the Beltclip 1 Hold the beltclip in the direction as illustrated.
Charging the Battery Pack Your marine radio is powered by a specially designed Ni-MH bat- tery pack. • Before operating the Atlantis 260 , charge the Ni-MH battery pack for 16 hours without interruption with the Adaptor. 1 Place the Atlantis 260 in the Cradle.
Operation See Controls and Indicators (page 2) for button, knob, and key positions. When you turn On your Atlantis 260 just after purchasing, it is automatically tuned to channel 16 frequency for distress, safety, and calling. When you press any button (except PTT and LOCK key), a short tone sounds.
Selecting a Channel 1 Turn On your Atlantis 260 . 2 To select a higher channel, press the s button. 3 To select a lower channel, press the t button. • To change the channel continuously, press and hold the s or t button for more than 1 second.
Triple Watch Triple Watch mode monitors channels 16 and 9 for a signal while you listen to the currently selected channel. The marine radio checks channel 16 and 9 for activity every 2 seconds. 1 T o se lect Tri ple Watc h mo de, pres s th e TR I bu tton .
Programming a Channel into Memory Before using the scanning feature, you have to program channels into memory. 1 Select the channel to enter into memory by pressing the s or t button. 2 Press and hold the MEM button for 2 seconds to store the channel.
Deleting a Channel from Memory 1 Select the channel to delete from memory by pressing the s or t button. 2 Press and hold the MEM button for 2 seconds. MEM disappears from the display. Scanning 1 To begin scanning the programmed channels, press the SCAN button.
Transmitting 1 Transmission power can be set to either 5W or 1W. Press the 1/5W button to make the change, then the 5W or the 1W indicator on the display changes accordingly. 2 To transmit, press and hold the PTT (push- to-talk) key. TX appears on the display.
Battery Indicator When the unit is On, battery power is always indicated on the display. When the battery is fully charged, the battery indicator appears as follows: When the battery is nearly dischar.
Marine Channels - International Channel Frequency (MHz) Traffic Type Ship to Ship to Permanent Desig Transmit Receive Ship Shore Scan List 01 156.050 160.650 Duplex Yes Yes 02 156.100 160.700 Duplex Yes Yes 03 156.150 160.750 Duplex Yes Yes 04 156.200 160.
Channel Frequency (MHz) Traffic Type Ship to Ship to Permanent Desig Transmit Receive Ship Shore Scan List 65 156.275 160.875 Duplex Yes Yes 66 156.325 160.925 Duplex Yes Yes 67 156.375 156.375 Yes No 68 156.425 156.425 Yes Yes 69 156.475 156.475 Yes Yes 70 RX Only 156.
Optional Parts and Replacement Accessories 20 Cradle Ni-MH Battery Mounting Screws AC Adaptor DC Adaptor A nt e nna Wrist Strap Beltclip A lkaline Battery Case Speaker Microphone SM078 Atlantis 260CE.
Specifications General Freq. Control PLL Freq. Tol. Transmit 1.5 PPM (at 25 q C) Receive 1.5 PPM (at 25 q C) Oper. Temp. D15 q C to +55 q C Antenna Flexible Whip Microphone Built-in Electret type Display Liquid Crystal Display Speaker 8 0 W, 1 Watt Power Source Rechargeable Ni-MH Battery Pack 7.
Troubleshooting Not enough range Cause: Line of sight blocked Increase antenna height. Will not transmit on 5 watt range but will transmit on the 1 watt range. Cause: Low voltage Recharge or replace the batteries. Will not transmit while charging. Cause: Low voltage The radio is not designed to transmit while charging.
Warranty UNIDEN Atlantis 260 MARINE RADIO One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase.
Memo: Atlantis 260CE.indd 24 6/3/08 4:51:18 PM.
Memo: Atlantis 260CE.indd 25 6/3/08 4:51:18 PM.
©2008 Uniden Australia Pty Limited, Uniden New Zealand Limited. Printed in China. UTZZ01620AZ(0) Atlantis 260CE.indd 26 6/3/08 4:51:19 PM.
Ein wichtiger Punkt beim Kauf des Geräts Uniden 260 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden 260 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden 260 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden 260 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden 260 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden 260 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden 260 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden 260. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden 260 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
