Benutzeranleitung / Produktwartung 250 des Produzenten Uniden
Zur Seite of 36
.
www .uniden.com.
Contents Controls and Indicators ...................................................................... 2 Warning! .............................................................................................. 4 Introduction ..........................
Controls and Indicators 2 1 Antenna 2 Belt Clip 3 Adapter Jack 4 Battery 5 Battery Release Clip 6 PTT (Push to Talk) Key 7 USA/International/Canadian Button ( UIC ) 8 WX Mode/Weather Alert Button ( WX.
3 A Transmit Indicator B TX Power Indicator C USA/International/Canadian ( US/INT/CAN ) Indicator D Channel Number Display E Memory Indicator F Scan Indicator G Battery Indicator H Triple Watch Indica.
W arning! • The ATLANTIS 250 is waterproof only when both the antenna and the battery are properly attached. • Do not operate the transmitter of any radio equipment unless all the Radio Frequency (RF) connectors are secure and any open connectors are properly terminated.
Introduction The ATLANTIS 250 is a waterproof, portable two-way VHF transceiver. It is compact, lightweight, rugged and fits easily in your hand. This handheld VHF marine radio will give you consistent, outstanding performance in virtually all conditions and situations.
Technical Support and Service Your Uniden dealer can provide you with sales assistance and information. If your marine radio does not perform properly, follow the troubleshooting tips in the back of this operating guide. For technical support contact Uniden at 1-800-586-0409.
Included in Y our Package If any of these items are missing from the box, contact your Uniden Dealer or the Uniden Parts Department at (800)-554-3988. Cradle Beltclip Wrist Strap Rechargeable Battery .
Getting Started Mounting the Cradle Mount the Cradle to either a counter or wall. To counter: Attach the Cradle using the mounting screws and washers as follows. To wall: Apply the Cradle to the wall and insert the two mounting screws into the larger holes of the Cradle Push down the Cradle until it is firmly seated.
Using the Alkaline Battery Case When needed, you can use the battery case with Alkaline AA batteries (not included) instead of the rechargeable battery pack. To install the batteries: Remove the battery case cover by pulling the 2 halves apart applying your fingers to the projections.
Charging the Battery Pack Your marine radio is powered by a specially designed Ni-MH battery pack. • Before operating the ATLANTIS 250 , charge the Ni-MH battery pack for 16 hours without interruption with the Adapter. Place the ATLANTIS 250 in the Cradle.
Operation • See “Controls and Indicators” (page 2) for button, knob, and key positions. • When you turn On your ATLANTIS 250 just after purchasing, it is automatically tuned to channel 16, the United States Coast Guard frequency for distress, safety, and calling.
Selecting a Channel Turn On your ATLANTIS 250 . To select a higher channel, press the ▲ button. To select a lower channel, press the ▼ button. • To change the channel continuously, press and hold the ▲ or ▼ button for more than 1 second.
Triple Watch Triple Watch mode monitors channels 16 and 9 for a signal while you listen to the currently selected channel. The marine radio checks channel 16 and 9 for activity every 2 seconds. To select Triple Watch mode, press and hold the 16/9/TRI button for 2 seconds.
Monitoring Weather Channels The ATLANTIS 250 has 10 preprogrammed emergency/weather channel frequencies, represented by 0 through 9. To listen to the emergency/weather channels in your area, press the WX/ALERT button. WX appears on the display. To move up, press the ▲ button.
Emergency/Weather Alert Emergency/Weather Alert allows your ATLANTIS 250 to function as a severe weather warning radio and will also alert you to any local or national emergencies. If the NOAA issues warning while this feature is turned On, the radio sounds an alert tone.
USA, International and Canadian Channels The ATLANTIS 250 is initially set for USA marine channels when you turn On your radio. To listen to international marine channels, press the UIC button once. INT appears on the display. To listen to Canadian marine channels, press the UIC button again.
Deleting a Channel from Memory Select the channel to delete from memory by pressing the ▲ or ▼ button. Press the MEM button. MEM disappears from the display. Scanning To begin scanning the programmed channels, press the SCAN button. SCAN and TRIPLE appear on the display.
Transmitting Transmission power can be set to either 5W or 1W. Press the 1/5W/LOCK button to make the change, then the 5W or the 1W indicator on the display changes accordingly. To transmit, press and hold the PTT (push-to-talk) key. TX appears on the display.
Battery Indicator When the unit is On, battery power is always indicated on the display. When the battery is fully charged, the battery indicator appears as follows: When the battery is nearly dischar.
Marine Channels - USA Channel Frequency (MHz) Traffic Type Note Ship to Ship to Desig Transmit Receive Ship Shore WX0 — 163.275 NOAA Weather RX Only RX Only WX1 — 162.550 NOAA Weather RX Only RX Only WX2 — 162.400 NOAA Weather RX Only RX Only WX3 — 162.
Channel Frequency (MHz) Traffic Type Note Ship to Ship to Desig Transmit Receive Ship Shore 24 157.200 161.800 Public Corresp. DUP No Yes 25 157.250 161.850 Public Corresp. DUP No Yes 26 157.300 161.900 Public Corresp. DUP No Yes 27 157.350 161.950 Public Corresp.
Marine Channels - International Channel Frequency (MHz) Traffic Type Ship to Ship to Permanent Desig Transmit Receive Ship Shore Scan List WX0 — 163.275 NOAA Weather RX Only RX Only Weather WX1 — 162.550 NOAA Weather RX Only RX Only Weather WX2 — 162.
Channel Frequency (MHz) Traffic Type Ship to Ship to Permanent Desig Transmit Receive Ship Shore Scan List 24 157.200 161.800 Duplex No Yes Busy Tel. 25 157.250 161.850 Duplex No Yes Busy Tel. 26 157.300 161.900 Duplex No Yes Busy Tel. 27 157.350 161.
Marine Channels - Canada Channel Frequency (MHz) Traffic Type Ship to Ship to Permanent Desig Transmit Receive Ship Shore Scan List WX0 — 163.275 NOAA Weather RX Only RX Only WX1 — 162.550 NOAA Weather RX Only RX Only WX2 — 162.400 NOAA Weather RX Only RX Only WX3 — 162.
Channel Frequency (MHz) Traffic Type Ship to Ship to Permanent Desig Transmit Receive Ship Shore Scan List 24 157.200 161.800 Duplex No Yes Busy Tel. 25 157.250 161.850 Duplex No Yes Busy Tel. 26 157.300 161.900 Duplex No Yes Busy Tel. 27 157.350 161.
Optional Parts and Replacement Accessories Uniden Parts Department (800)-554-3988 We can also be reached on the web at www.uniden.com Cradle Ni-MH Battery (BP 250) Reference Guide Mounting Screws AC A.
Specifications General Channels Transmit and Receive All US/International/ Canada Channel Weather 10 Freq. Control PLL Freq. Tol. Transmit 1.5 PPM (at 25°C) Receive 1.
T roubleshooting Not enough range Cause: Line of sight blocked ⇒ Increase antenna height. Will not transmit on 5 watt range but will transmit on the 1 watt range. Cause: Low voltage ⇒ Recharge or replace the batteries. Will not transmit while charging.
FCC RF EXPOSURE INFORMA TION WARNING! Read this information before using the radio In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters.
Three-Y ear Limited W arranty Important! Evidence of original purchase is required for warranty service. WARRANTOR: Uniden ELEMENTS OF WARRANTY: Uniden warrants for three years, to the original retail.
MEMO.
MEMO.
MEMO.
2003 UTZZ01899ZD (0).
Ein wichtiger Punkt beim Kauf des Geräts Uniden 250 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Uniden 250 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Uniden 250 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Uniden 250 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Uniden 250 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Uniden 250 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Uniden 250 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Uniden 250. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Uniden 250 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
