Benutzeranleitung / Produktwartung SU50K3/3PM des Produzenten Tripp Lite
Zur Seite of 24
Owner's Man ual W ARRANTY REGISTRA TION: register online toda y for a chance to win a FREE T ripp Lite product— www .tr ipplite.com/w arranty Smar tOnline ™ 3-Phase (50kV A & Abo ve) Intelligent T rue On-Line UPS Systems Input/Output: 3Ø, 4 Wire (plus gr ound), wy e • SU50K3/3PM & SU80K3/3PM Models: .
2 Impor tant Safety W arnings SA VE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and maintenance of all T ripp Lite SmartOnline 3-Phase UPS Systems (50kV A and above) and their batteries.
3 Impor tant Safety W arnings (continued) • Connect only T ripp Lite battery modules to your UPS's external battery hardware terminals. • Do not operate your UPS without batteries. • Fuses should be replaced only by factory authorized personnel.
4 P ower Module Features There are two separate UPS system modules: a power module and a 348V DC battery module. Familiarize yourself with the location and function of the features on each module before installing and operating your UPS system. The power module is described below .
Installation Follow all warnings listed in the Safety section prior to installation. The following checklist provides a general guide rather than a complete outline of procedures. Installation Checklist K The floor area where the UPS will be installed has enough supporting strength.
6 Electrical Connection • Connection Chec klist • Recommended Cable Sizes • T erminal Wiring Diagrams • P arallel Wiring Diagrams Follow all warnings listed in the Safety section prior to hardwire terminal connection. The following checklist provides a general guide rather than a complete outline of procedures.
7 Electrical Connection (continued) T erminal Wiring Diagrams The following wiring diagrams are organized according to V A. W ithin each V A grouping, there is a “single loop” connection option (where only one input source is used) and a “double loop” connection option (where two input sources are used).
8 Single UPS Operation The diagrams and procedures in this section apply to a single UPS Power Module connected to a single equipment load. Note: all diagrams assume the presence of two separate AC sources supplying two separate inputs: a mains source supplying rectifier input and a reserve s ource supplying reserve input.
9 Single UPS Operation (continued) Reserve AC Input Supply Mode In this mode, the power module's inverter has encountered one of several abnormal operating conditions including overtemperature, continual overload, shorted output or depleted battery power .
10 Single UPS Operation (continued) After following all warnings listed in the Safety section and precautions listed above, start-up UPS according to the following procedure: S tep 1. T urn on (close) the “RESER VE INPUT” Breaker . The LCD Screen will display “Bypass Mode”.
11 Multiple UPS Operation (P arallel) The diagrams and procedures in this section apply to a parallel configuration where multiple UPS Power Modules (up to eight) are connected to a single equipment load.
12 Multiple UPS Operation (P arallel) (continued) Back-Up Mode In this mode, utility AC input power has failed. Since the UPS Systems operate continuously on-line, their connected battery mo dules instantly (with zero transfer time) supply DC power to their inverters.
13 Multiple UPS Operation (P arallel) (continued) Maintenance Bypass Mode In this mode, the Manual Maintenance Procedure (On Bypass) has been performed in order to pass-through filtered AC input power (from a reserve AC input source) to connected equipment loads while allowing maintenance on the UPS power module.
14 Multiple UPS Operation (P arallel) (continued) Common Battery In this configuration, a single bank of battery modules is shared by multiple UPS power modules. This not only reduces installation costs, but saves floor space. Note: when using the LCD Screen to set battery charging, divide the char ging task equally among all UPS power modu les.
15 Multiple UPS Operation (P arallel) (continued) Shutdown Pr ocedure This procedure removes power from and shuts down the UPS power modules. W ARNING! When shutting down individual UPS power modules .
16 LCD Displa y Navigation The LCD Screen displays a wide variety of operational conditions as well as provides managers with the ability to set operational parameters and view event logs. The LCD Screen will display a block diagram of the current operating mode.
17 LCD Displa y Navigation (continued) “P arameter Setting” Sub-Menu This sub-menu allows you to set UPS operational parameters. A password is required to access this sub-menu. Note: The default pa ssword is 0 0 0 0. T o change the password, select the “Password Setting” screen in this sub-menu.
18 LCD Displa y Navigation (continued) “System Control” Sub-Menu This sub-menu allows you to directly control UPS operation. A password is required to access this sub-menu. Note: The default password is 0 0 0 0. T o change the password, select the “Password Setting” screen in the “Parameter Setting” sub-menu.
19 LCD Displa y Navigation (continued) “Other Information” Sub-Menu This sub-menu allows managers to view a variety of additional UPS System information. UPS Status Code Note: a UPS S tatus Code is displayed in the upper -right corner of the screen in the following display .
20 Comm unications Dry-Contacts Remote Emergency P ower Off (EPO) This feature is only for those applications that require connection to a facility's Emergency Power Of f (EPO) circuit. When the power module is connected to this circuit, it enables emergency shutdown of the output.
21 Comm unications (continued) RS-232 P or t/Ethernet P or t/SNMP Card Slot The RS-232 port connects your UPS via an RS-232 cable to a workstation or server equipped with T ripp Lite power management soft ware. The RS-232 port uses RS-232 communications to report UPS status and power conditions.
22 Comm unications (continued) RS-485 P or ts These ports connect multiple UPS power modules in a parallel connection. UPS P arallel Communication P or ts These ports allow multiple UPS power modules to communicate while in a parallel configuration.
23 Service Y our SmartOnline 3-Phase UPS System is covered by the limited warranty described below . Extended warranty (2-, 3- and 4-year) a nd start-up service programs are available. For more information, call T ripp Lite Customer Service at (773) 869-1234.
1111 W . 35th Street • Chicago , IL 60609 USA (773) 869-1234 • www .tr ipplite.com 200503068 93-2439.
Ein wichtiger Punkt beim Kauf des Geräts Tripp Lite SU50K3/3PM (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tripp Lite SU50K3/3PM noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tripp Lite SU50K3/3PM - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tripp Lite SU50K3/3PM reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tripp Lite SU50K3/3PM erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tripp Lite SU50K3/3PM besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tripp Lite SU50K3/3PM verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tripp Lite SU50K3/3PM. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tripp Lite SU50K3/3PM gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
