Benutzeranleitung / Produktwartung SISGM1040-162D des Produzenten Transition Networks
Zur Seite of 132
6 10/100/1000 T + 2 10/100/1 000T/ 100/100 0 SFP Combo w / X-Ring Managed Industrial Sw itch User Manua l SISGM1040- 162D V1.01 September, 2009.
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 1 The contents of t his manual are based on the t able below list ing firm w are version, soft w are ker nel version, and hardware version.
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 I FCC Warning This Equipment has been tested and found to comply wi th the limit s for a Class-A digita l device, pursuant to Part 15 of the F CC rules.
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 1 Content Introduction .............. ......... ......... .............. ......... ......... 1 Benefits ......... ......... .............. .
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 2 Comman ds Le vel ........................................................... . 20 Comman ds Se t L ist..................................
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 3 TFTP— Update Firmwar e ... ....................... ............. 53 TFTP— Restore Confi guration . ............. ................. 54 TFTP— Backup Configura tion .
Transition Network s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1-95 2-941-7 600 4 Trap C onfig urati on .......................................................... 88 SNMPV3 Confi gur ation .. ..........................
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 1 Introduction The 6 10/100/1000T + 2 10/100/1000T/ 100/ 1000 SFP Combo w/ X-Ring Managed Switch is a cost-eff ective solution and meets the high relia bility requireme nts demanded by industr ial applications.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 2 Port Base, Tag Base and T ype of Service Priority Port Mirror: Monitor tra f.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 3 Package C onte nts Please refer to the pack age content list below t o verify them against the checklist .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 4 Ha rd w are Descr iption This s ection describes the Ind ustrial s witch’s hardware spec, port, c abling i nformation, and wiring installation.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 5 Top View The top panel of the 6 10/ 100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X- Ring Managed Switch has one terminal block connector f or two DC power inputs.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 6 Off Power input 1 is inactiv e Green Power input 2 is active PWR2 Off Power input 2 .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 7 Wiring the Powe r Inputs Please follow the steps below to insert the power wire. Insert the positive and negative wires into the V+ and V- contacts on t he terminal block connector.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 8 Wiring the Fault A larm Conta ct The fault alarm contacts are in the m iddle of the terminal block connector as the pictur e shows below.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 9 Mounting Ins tallation DIN-Rail M ountin g The DIN-Rail is installed on the industrial s witch at th e factor y. If t he D IN-Rail i s not installed, ple ase see t he f ollowing pictures to scr ew t he DIN-Rail onto t he switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 10 1. First, insert the top of DIN-Rail into the track. 2. Then, lightly push the DIN-Rail int o the track. 3. Check if the DIN-Rail i s tightened on the trac k or not.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 11 Wall Mou nt Plate Mount ing Follow the steps below to mount the industrial switch with a wall mou nt plate. 1. Remove t he DIN-Rail f rom t he in dustrial switch; loose t he scr ews to remove the DIN - Rail.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 12 Ha rd w are Installa tion This section descri bes how to physically inst all the 6 1 0/100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X-Ri ng Managed Switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 13 Netw ork Application This section provi des som e sam ple applicati ons t o guide users.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 14 X-Ring A pplicati on The i ndustrial sw itch supports th e X-Ring protocol that can help the network r ecover from a c onnection failur e w ithin 3 00ms or l ess, ensuring network reliability.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 15 Coupling Rin g Applic atio n In the network, there may be more tha n o ne X- Ring grou p. The coupling ring f unction can connect e ach X-Rin g for red undant backup.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 16 Dual Homin g Applicatio n Dual Homing is a function to prev ent the con nection breaking between an X-R ing group and an upper level/cor e switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 17 Conso le Management Connecti ng to the Conso le Port The sup plied cabl e has an RS-232 connector on one end and a n RJ-45 connector on the other.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 18 Login in the Console I nterf ace W hen the connection between Switch an d PC is rea.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 19 Console lo gin interfac e CLI Mana gement The system supports a command line interf ace management–CLI. A fter you have logged in the system by typing in user name and pas sword, you will s ee a command prompt.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 20 The following table list s the CLI commands a nd description. Commands Level Modes Access Method Prompt Exit Method A bout This Mode1 User EXEC Begin a session with your switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 21 EXEC mode. Interface configuratio n Enter the interface command (with a specific interface) while in global configuration mode switch (config-if)# To exit to global configuratio n mode, enter exit.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 22 [System Location] location string xxx system description [System Description] G Set.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 23 dhcpserver subnetm ask [Subnet mask] G Configure subnet mask f or DHCP clients switch(config)# dhcpser ver subnetmask 255.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 24 no security G Disable IP security function switch(config)# no sec urity no security.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 25 no security I Disable security of interface switch(config)# interfa ce fastEthernet.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 26 or to 256000 kbps f or giga ports, and zero means no limit.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 27 Trunk Command s Set Command Level Description Example aggregator priority [1~65535].
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 28 show aggregator P Show the inform ation of trunk group switch# show aggregator 1 or.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 29 IEEE 802.1Q VL AN vlan 8021q nam e [GroupName] vid [VID] V Change the name of VLAN group, if the group didn’t exist, this command can’t be applied.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 30 [TaggedVID List] switch(vlan)# vlan 8021q trun k 3 hybrid-link untag 5 tag 6-8 show.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 31 spanning-tree hello - time [seconds] G Use th e spanning-tree hello-time global configuration command to specif y the interval between hello bridge protocol data units (BPDUs).
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 32 into the forwarding state. stp-path-priority [Port Priority] I Use the spanning-tre e port-priority interface configuration command to config ure a port priority that is used when t wo switches tie for position as the root switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 33 qos prioritytype [port-based|cos- only|tos-only|cos- first|tos-first] G Setting of .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 34 no igmp-query G Disable IGMP query swi tch# no igmp -query Mac / Filter Table Commands Set Command Level Description Example mac-address- table static hwaddr [MAC] I Configure MAC address table of interface (static).
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 35 snmp system-nam e [System Name] G Set SNMP agent system name switch(config)# snmp s.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 36 security-level [NoAuthNoPriv| AuthNoP riv|AuthPriv] match-rule [Exact|Prifix] views.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 37 match-rule [Exact|Prifix] views [Read View Name] [Write View Name] [Notify View N ame] no snmpv3 mibview view [View N ame] type [Excluded|Included] sub-oid [OID] G Remove specified mibview table of SNMPV3 agent.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 38 switch(config-if)# no m onitor 802.1x Commands Set Command Level Description Example 8021x enable G Use the 802.1x global configuration command to ena ble 802.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 39 the NAS ID 8021x misc quietperio d [sec.] G Use th e 802.1x misc quiet period global configuration command to specif y the quiet period val ue of the switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 40 8021x portstate [disable | reject | acc ept | authorize] I Use the 802.1x port state interface configuration command to set the state of the selected port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 41 SystemLog, SMTP and Event Command s Set Command Level Description Example systemlog ip [IP address] G Set System log server IP address.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 42 [Systemlog|SMTP |Both] event ring-topolog y- change [Systemlog|SMTP |Both] G Set X-.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 43 sntp enable G Enable SNTP function switch(config)# sntp en able sntp daylight G Enable daylight savin g time, if SN TP function is inactive, this command can’t be applied.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 44 time zone list no sntp G Disable SNTP function switch(config)# no sntp no sntp dayl.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 45 Web-Bas ed Mana gement This section introduces the configuration and functions of the Web-Based m anagement. A bo ut We b-base d Manag ement On the CPU board of the switch there is an embedd ed HTML web site residing in flash memory.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 46 S y stem L ogin 1. Launch the Internet Explorer on the PC 2. Key in “http:// “+” the IP address of the switch”, and then Press “ En ter ”.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 47 Main Page The home page of the W eb-base d screen mainly consists of a treevie w control item. For more details about each f unction, please click t he ‘+’ symbol of each no de to expand the tree structure.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 48 S y stem Inf ormat ion Assign the system na me, location and view the s ystem information. System Name: Assi gn the name of switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 49 IP Config uratio n User can configure the IP Settings and DHCP client f unction DHCP Client: Enable or disab le the DHCP client function.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 50 DHCP Ser ver—S ystem conf igur ation The system provides the DHCP server function. Enab le the DHCP server f unction, the switch system will be a DHCP server.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 51 DHCP Clien t—C lient Ent ries W hen the DHCP server function is active, the system will collect the DHCP client information and display it h ere.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 52 DHCP Ser ver—Port and IP Bi nding s You can assign the specif ic IP address that is the IP in th e dynamic IP assign range to the specific port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 53 TFTP—Upd ate Firmw are TFTP allows t he user to u pdate the s witch firmware r emotely, via t he network. Before updating, make sure you have your TFTP server read y and the f irmware i mage is o n the TFTP server.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 54 TFTP—Rest ore Con figurat ion You can restore the switch confi guration f rom the TFTP server, but you must put the image file on TFTP ser ver first.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 55 TFTP—Back up Conf iguration You can sav e the cur rent switch c onfiguration from the switch to TF TP server, then g o to the TFTP restore conf iguration page to restore the sw itch configuration.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 56 S y stem E vent Lo g—S yslog Conf iguration Configure the system events that you want to record a nd the system log server IP. 1. Syslog Client Mode: Select the s ystem log mode – client o nly, serv er only, or both S/C.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 57 S y stem E vent Lo g—SM TP Configura tion You can set up the mail server IP, m ail account, account p assword, and forwarded em ail account for receiving the event alert.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 58 SMTP Confi guration interfa ce.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 59 S y stem E vent Lo g—Event Configu ration Y ou can select the system log events and SMTP event s. W hen selected events occur , the system will send out the log i nformation.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 60 Event Config uration interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 61 Fault Rela y A l ar m The Fault Relay Alarm function pr ovides the m echanism for warning w hen power or port faults are detected.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 62 SNTP Co nfigura tion You c an conf igure the S NTP (Simple Network Time Protocol) s ettings. Th e SNTP allo ws you to synchronize swi tch clocks via the Internet.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 63 HAW - Haw aiian Standard -10 hours 2 am Nome, Alaska -11 hours 1 am CET - Central E.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 64 Standard NZT - New Zealand 4. SNTP Sever URL: Set the SNTP server IP a ddress. 5. Daylight Saving P eriod: S et up the Daylight Saving beginning t ime and D aylight Saving ending time.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 65 IP Securit y The IP security f unction a llows the user to assign 10 sp ecific IP addresses th at have permission to access the switch thr ough the web bro wser for managing the switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 66 IP Securit y interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 67 User A ut hentica tion Here you can change l ogin user name and pa ssword for management s ecurity. 1. User name: Key in t he new user name (The default is “root”) 2.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 68 Port Stat istic s The following inf ormation provides the curre nt port statistic inform ation. Port: The port number. Type: Displays the cur rent speed of connection to t he port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 69 Port Cont rol In Port control, you can view every port status that depended on user sett ing and th e negotiation result. 1. Port: select the port that you want to configure.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 70 Port Trunk The Link Aggr egation Control Pr otocol (LACP ) provides a sta ndardized .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 71 the left f ield. To re move un wanted ports, select the p ort and click R emov e . W hen LACP enabled, you ca n conf igure LAC P Active/Passive status f or each port on State Activit y page.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 72 Aggregator Information W hen you hav e set up the aggre gator sett ing with LACP disabled, you will se e the local static trunk group inf ormation in here.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 73 State Activity Having set up t he LACP aggregator on the t ab of Aggregator S etting, you c an c onfigure the st ate activit y f or the mem bers of the LACP trunk group.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 74 Port Mirror ing The Port mirroring is a method f or monitoring traffic i n switched net works. Traf fic through ports can be monitore d by one specific port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 75 Rate Limiti ng Y ou can set up every port’ s bandwidth rate an d frame limitation type. Ingress Limit Fram e type: Sel ect the f rame type that you expect to filter .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 76 VL A N c onfigura tion A Virtual LAN (VLAN) is a l ogical network grouping t hat limits th e broadcast domain.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 77 VLAN configuration—Port-based VLAN Packets can go among only members of the same VLAN group. Note all unselected ports are tre ated as belongi ng to another single VLAN.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 78 VLAN—Port Based Add interface You will see the VLAN displays. Use D ele te button to delete unwante d VLAN. Use Edit button to modif y existing VLAN group.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 79 802.1Q VLAN Tag-based V LAN i s an IE EE 802.1Q s pecification sta ndard. T herefore, it is possible to create a V LAN across devices f rom different switch venders.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 80 802.1 Q Configur ation 1. Enable GVRP Pr otocol: check the check bo x to enable GVRP prot ocol. 2. Select the port that you want to configure.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 81 Group Confi guration interfa ce 3.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 82 Rapid Span ning Tree The Rapid Spanning T ree Protocol (RSTP) is an ev olution of the Spanning Tree Protocol and provides for f aster spanning tree conver gence after a topology c hange.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 83 RSTP S ystem Config uratio n interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 84 RSTP - Port Configuration You can configure pat h cost and priority of every port. 1. Path Cost: T he cost of the path to the other bridge from t his transmitt ing brid ge at the specified port.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 85 RSTP Port Conf iguration interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 86 SNMP Conf igura tion Simple Network Manageme nt Protocol (SNMP) is the protocol developed to manag e nodes (servers, workstations, routers, s witches and h ubs etc.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 87 SNMP S ystem Configurat ion interfa ce.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 88 Trap Configuration A trap manager is a m anagement station that receives traps, the system alerts generated b y the switch. If no trap m anager i s defined, no traps w ill issue.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 89 SNMPV3 Configuration Configure the SNMP V3 f unction. Context Table Configure SNMP v3 context t able. Assign the cont ext name of context table.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 90 SNMP V3 configurat ion interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 91 Group Table Configure SNMP v3 group tabl e. Security Name (User ID): Assign the user nam e that you have set u p in user table. Group Name: Set up t he group name.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 92 QoS Config urati on You can configure Qos policy an d priority setting, per port priority setting, COS a nd TOS setting. QoS Policy and Priority Type Qos Policy: select the Qos policy rule.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 93 QoS Configurat ion interfa ce.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 94 Port Base Priority Configure per port prio rity level. Port: Each port has 4 egress queues – High, Middle, Low, and Lowest. Click A pp ly .
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 95 IGMP C onfigurat ion The Internet Gr oup Man agement Protocol (IGMP) is an internal protocol of the Internet Protocol (IP ) suit e. I P m anages multic ast traffic b y using switches, routers, and hosts that support IGMP.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 96 IGMP Configura tion interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 97 X-Ring X-Ring provides a f aster re dundant recover y than Sp anning Tree topolo gy. The action is similar to STP or RSTP , but the algorithms a re different.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 98 to be the forwarding po rt of the Ring Master s witch. Enable Coupling Ring: To enable the co upling ring function. Marking the check box to enable the coupling ri ng function.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 99 LLDP Configurat ion Link Layer Discovery Protocol ( LLDP) is defined in the IEEE 802.1AB. It i s an emerging standard which provides a solution for the configuration issues caused b y expanding LANs.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 100 Securit y In this section, you can conf igure 802.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 101 802.1x S ystem Config uration interf ace.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 102 802.1x Port Conf iguration You c an co nfigure 802.1x authentication state f or each port. The State provides Disabl e, Accept, Reject and Authori ze.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 103 M isc Configur ation 1. Quiet Period: Set the period during which the port doesn’t try to ac quire a supplicant. 2. TX P eriod: Set the period the port wait for retransmit next EAPOL PDU during an authentication session.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 104 MAC Address Table Use the MAC address table to ensure port securit y.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 105 Static MAC Addresse s interface.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 106 M AC Filterin g By filtering MAC addre sses, the s witch can easily f ilter the pre-conf igured MAC address and reduce insecurit y. You can add and delet e filtering MAC address.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 107 All MAC Addres ses You can view all of t he MAC addresses learn ed by the selected port. Select the port number. The selected port of static & dynamic MAC address i nformation will be displayed in here.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 108 M AC Address Table—M ulticast Fil tering Multicasts are sim ilar to broadcasts. The y are sent to all e nd st ations on a LAN or VLAN.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 109 Factor y Default Reset s witch to def ault conf iguration.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 110 Save Con figuration Save all c onfiguration s t hat you h ave made in the system. Click Sav e to save the all configuration to the f lash memory.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 111 S y s tem R eboot Reboot the switch in soft ware reset.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 112 Troublesho oting Verif y t he s witch is using the r ight power c ord/adapter (DC 12-48V), please don’t use the power adapter with DC volt age higher t han 48V, or it may damage th e switch.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internationa l: 00-1-95 2-941-7600 113 Techn ical Specifica tion The 6 10/100/1000T + 2 10/100/1000T/ 100/ 1000 SFP Combo w/ X-Ring Managed Switch technical specif ication is following.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 114 Packet Buffer 1Mbits MAC address 8K MAC address table Flash ROM 4Mbytes DR A M 32M.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 115 Install DIN rail kit for DIN-type cabinet and wall mount ear for wall mount install Operation Temp.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 116 GVRP (256 Groups) Double Tag VLAN (Q in Q)* Private VLAN** Port Trunk w ith LACP LACP Port Trunk: 4 Trunk groups/ Maximum 4 trunk mem bers Class of service IEEE802.
Transition N etwork s SISGM1040-16 2D-LR Technical S upport: 1-8 00-260-13 12 Internatio nal: 00-1- 952-941-7 600 117 SNTP Supports Simple Network Time Protoco l to synchronize system clock in Internet.
Transition N etwork s SISGM1040-16 2D-LR 118 Appen dix 10 /100B A S E-T X Pin outs W ith10 /100BASE -TX cable, pins 1 and 2 are used f or transmitting d ata, and pins 3 and 6 for receiving data.
Transition N etwork s SISGM1040-16 2D-LR 119 Straight-thr ough cab le schemati c Cross over cable sc hemati c 10/100/100 0Bas e- TX Pin outs The following figure sh ows the 10/100/100 0 Ethernet RJ-45 pin outs.
Transition N etwork s SISGM1040-16 2D-LR 120 10/100/100 0Bas e- TX Cable Sch ematic Straight thr ough cable s sch ematic Cross over cab les sche matic.
Transition N etwork s SISGM1040-16 2D-LR 121 Gigabit Copper/SF P (mini- GBIC) combo port The Industrial s witch has t wo auto-detect Giga port—UTP/F iber c ombo ports. T he Gigabit Copper ( 10/100/1000T) ports should use Categor y 5e or above UTP/STP cable for connection.
Transition N etwork s SISGM1040-16 2D-LR 122 First, insert the transceiv er into the SFP slot. Notice that th e triangle m ark is the bottom of the slot.
Transition N etwork s SISGM1040-16 2D-LR 123 Second, insert the fiber cable of LC connector into the transceiver. Figure 2.1 0: LC conne ctor to the transceiver.
Transition N etwork s SISGM1040-16 2D-LR 124 To remove the LC connector f rom the transceiver, pleas e follow the steps sho wn below: First, press the upper side of the LC connector to release f rom the transceiver and pull it out.
Transition N etwork s SISGM1040-16 2D-LR 125 Cabling Use four twisted-pair, Category 5 e/above cabling for RJ-45 p ort connection. The cable between the switch and the link p artner (switch, hu b, workstation, etc.) must be less than 100 meters (32 8 ft.
Ein wichtiger Punkt beim Kauf des Geräts Transition Networks SISGM1040-162D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Transition Networks SISGM1040-162D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Transition Networks SISGM1040-162D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Transition Networks SISGM1040-162D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Transition Networks SISGM1040-162D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Transition Networks SISGM1040-162D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Transition Networks SISGM1040-162D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Transition Networks SISGM1040-162D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Transition Networks SISGM1040-162D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.