Benutzeranleitung / Produktwartung MIL-SW8T1GPA des Produzenten Transition Networks
Zur Seite of 41
Rev.A0 19-May-10 MIL-SW8T1GP A 8 Port 10/100/1000BASE-T w ith 1 Combo 1000BASE-X SFP Port Web Managed Switch User Guide.
Regulatory Approv al - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the req uirements of the Can adian Interference-C ausing Equipment Regulat ions.
1 Content INTR ODUC TION .............................................................................. 3 Features ................................................................................................................... 3 Software Featur e.
2 Spanning Tree ....................................................................................................... 2 5 RSTP System Con figuration ........................................................................... 25 RSTP Port Con figuration .
3 Introduction The 8 1 0/100/1000T with 1 1000Base-X SFP/RJ45 Combo po rt W eb Managed Switch t hat ca n be used to build h igh-performance sw itched workgr oup networks.
4 VLAN Port Based VLAN IEEE 802.1Q VLANs. Up to 256 groups Support DHCP client Support Class of Service Support Spanning T re e 9K Jumbo Frame support Softw are Feature Management W eb M ana gement Firmware update W eb UI firmware upda te System default One default button for system defau lt Default IP: 192.
5 Quality of Service Port based Tag based IPv4 Type of Service Class of Service Per port support 4 priority queues Spanning Tree IEEE802.1w rapid spannin g tree and compatible with IEEE 802.
6 item is missing or damaged, please contact the local dealer for exchanging..
7 Hardware Description This section mainly describes the hardware of the 8 10/100/1000Base-T with 1 1000Base-X SFP /RJ45 Combo po rt W eb-Sma rt Switch and gives a p hysical and functional overview on certain switch.
8 Switch RJ-45 Ports (Aut o MDI/MDIX): 7x 10/100/1000 N-way auto-sen sing for 10Base-T, 100Base-TX or 1000Base -T connections. In general, MDI m eans connecting to another Hub or Switch while M DIX means connecting to a workstation or PC.
9 LED Indicators The LED Indicators display real-time in formation of systematic operation status. The following table provides de scriptions of LED status and their meaning.
1 0 Blinks Orange Collision of Packets occurs in the port Off -- Half-duplex mode or no de vice attached On Green The port is successfully connecting with the device Blinks Green The port is receiving.
11 other sid e o f power adaptor connects to the power outlet. The ex ternal power supply in the switch works with the AC power f rom 100 to 240V. Please check with the power indicator on the f ront panel to see if power is properly supplied.
1 2 Network Application This section provides user a f ew samples of network topolo gy in which the switch is used. In general, the 8 10/100/1000Base-T with 1 1000Base-X S FP/RJ45 Combo port W eb Man aged Switch is designed as a segme nt switch.
13 Segment Bri dge For enterprise networks where large data broadcasts are constantly processed, this switch is an ideal solution for department use rs to conne ct to the corporate backbone.
1 4.
15 Web-Based Management This section introduces the f unction configuration of the 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port W eb Managed Switch.
1 6 1. Launch the Internet Explorer 2. Key in “http://” + “IP Address” of th e 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port W eb Managed Switch, and then press “ Enter ” 3. Login screen will appear right af ter 4. Key in the password(The default password is “ root ”) 5.
17 time the client/switch bo ots and the lease is 50% or m ore passe d, t he client/switch will attempt to renew the lease. A t 8 7.5% of the lease c ompletion, the client/switch will attem pt to cont.
1 8 remote m anagement that include telnet, SNMP, and W eb browse the switch only when the port of VLAN group ID is equal to the Management VLAN ID Name: the name of the switch Password: W eb GUI login password.
19 Port Configura tion interface Statistics O verview The following information provides the current port statistic information Press C lea r button to clean all counts And then, click R efr e.
2 0 Statistics De tail The following info rmation p rovides st atistic detail inf ormation of statistic on each port, and simply selecting the port to viewing the statistic information.
21 And then, click A ppl y to bring up the configuration interface a s below: VLAN Setting int erface VLAN Port Setti ng Click VLA N Port Se t t i n g to bring up the configuration inte rface for .
2 2 in transmitted frames Frame T y pe: To set the outgoing frames Tagged: Outgoing frames with VLAN-Ta gged A ll: All type of frames After that, click A pp l y to apply the co nfigura.
23 Grouping the members of Tru nk. Normal means the port is not trunk port And then, click A ppl y to apply the configuration Or, click R efr e sh to rese t the configuration before applyi.
2 4 Or, click R efr e sh to rese t the configuration before applying LACP Setting int erface LACP Status W hen the LACP aggregator had been se tup, the LACP status information will display as belo.
25 LACP Status int erface Spanning Tree The Rapid Sp anning Tree Protocol (RST P) is an evolution of the S panning T ree Protocol and provides for faster spanning tree convergence after a to pology change. The system also supports S TP and the sy stem will auto detect the connected device that is running STP o r RSTP protocol.
2 6 lowest value has the highest priority an d is sele cted as t he ro ot. If the v alue has being changed, user has to reboot the switch. The v alue must be m ultiple of 4096 according to the proto col standard rule.
27 RSTP Port Configu ration Protocol Enable: To enable or disable the port proto col Edge: The port directly conne cted to end stations cannot create bridging loop in the network.
2 8 RSTP Status inter face 802.1X Confi guration 802.1x is an IEEE authentication specification that allow s a clie nt to co nnect to a wireless access point or wired switch but prevents the client f rom gaining access to the Internet unt il it provides creden tials, like a user name a nd password th at a re verified by a separate server.
29 Or, click R efr e sh to rese t the configuration before applying 802.1X Config uration interfac e Parameters Confi guration Reauthentication Enable: To enable the re-authentica tion mode .
3 0 QoS Setting Configuring Qo S mode o f th e po rt and p er port priority , TOS and COS p riority setting. Mode: Select the QoS mo de – port, DSCP, or vlantag Port Priority: Select the pri.
31 QoS Configurat ion interface Click D S C P Mappi n g to enter TOS priority configuration interfa ce DSCP [0- 63]: The system provides 0~63 TOS priority level. W hen the IP packet is re ceiv ed, the system will ch eck th e TOS level value in the IP packet that has received.
3 2 QoS DSCP Ma pping interf ace Click VLA N tag Mappi n g to e nter VLAN tag priority conf iguration in ter f ace. Select the VLAN tag priority level: High, Medium , Normal and Low.
33 System Rest art Reboot the switch in software reset. All the configuration s wi ll be rem inded Click Y es to restart the system System Restar t interface Factor y Default Reset switch to defau.
3 4 And then, press U pload to update the firmware Firm ware Upload interface Configurati on File Transfer The system provides the W eb GUI configuration upload f unction which would allow the user to backup the switch configuration.
35 Troubleshooting This section is intended to help user solve the m ost common problems on the 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port W eb Managed Switch with. Incorrect co nnections The switch port can auto d etect straight or crossover cable when link swi tch with other Ethernet device.
3 6 100 Ω Ca tegory 5 ca ble fo r 1 00Mbps connections. Also be sure that the len gth of any twisted-pair co nnection does not exceed 100 me ters (328 feet). G igabit port should u se Cat-5 or cat-5e cable f or 1000Mbps connections. The length does n ot exceed 100 meters.
37 Technical Specification This section prov ides the specifications o f 8 10/100/1000Base-T w ith 1 1 000Base-X SFP/RJ45 Combo port W eb Managed Switch with. Standard IEEE 802.3 10BASE-T Ethe rnet IEEE 802.3u 100BASE-TX Fast E thernet IEEE 802.3ab 1000Base-T IEEE 802.
3 8 Per unit: Power Network Cable 10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100BASE-TX: 2-pa ir UTP/STP CAT. 5 cable EIA/TIA-568 100-ohm (100m) Gigabit Copper: 4 pair UTP/STP CAT. 5 cable EIA/TIA 568 100-ohm (100 M) Connector Gigabit copper: 8 x RJ-45 with Auto-MDIX SFP port: 1 x SFP slot (3.
39 Operating Humidit y 10% to 90% (Non-condensing) EMI FCC Class A CE Safety UL cUL 10900 Red Circle Drive Minnetonka, MN 55344 Tel.: +1.952.941.7600 techsupport@transition.
Ein wichtiger Punkt beim Kauf des Geräts Transition Networks MIL-SW8T1GPA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Transition Networks MIL-SW8T1GPA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Transition Networks MIL-SW8T1GPA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Transition Networks MIL-SW8T1GPA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Transition Networks MIL-SW8T1GPA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Transition Networks MIL-SW8T1GPA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Transition Networks MIL-SW8T1GPA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Transition Networks MIL-SW8T1GPA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Transition Networks MIL-SW8T1GPA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
