Benutzeranleitung / Produktwartung TL-WN827N des Produzenten TP-Link
Zur Seite of 30
TL-WN827N Wireless N USB Adapter Rev: 1.0.2 1910010101.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trade marks or registered trademarks of t heir respective holders.
FCC RF Radiation Exposure Statement This device has been tested for compliance with FCC RF Exposure (SAR) limits in the typical laptop computer configur ation and this device can be used in desktop or laptop computers with side mounted PCMCIA slots. This device cannot be used with handh eld PDAs (person al digital assistants).
III CONTENTS Package Cont ents .................................................................................................... 1 Chapter 1 Introducti on............................................................................................. 2 1.
TL-WN827N Wireless N USB Adapter User Guide - 1 - Package Contents The following items should be found in your package: ¾ One TL-WN827N Wireless N USB Adapter ¾ One USB extension cable (for 100 mete.
TL-WN827N Wireless N USB Adapter User Guide - 2 - Chapter 1 Introduction 1.1 Product Overview Thank you for choosing the TL-W N827N Wireless N USB Adapter. The adapter is a draft 802.11n cli ent device; it is designed to provi de a high-speed and unrivaled wireless performance for your computer.
TL-WN827N Wireless N USB Adapter User Guide - 3 - 1.3 LED St atus The LED on the top of this card indicates Link/Act status. It blin ks at green light when sending an d receiving data. Chapter 2 Installation Guide 2.1 Hardware Inst allation 1. Connect one end of the U SB cable to the Adapter .
Wireless N USB Adapter User Guide TL-WN827N - 4 - Figure 2-1 Preparing Setup 2. To continue, the following Figure 2-2 will appear within seconds. You can select the configuration tool here. Figure 2-2 Setup T ype I. If you want to install the TL-WN8 27N Wireless Utility, please select the TP-LINK Configuration Tool and click Next .
Wireless N USB Adapter User Guide TL-WN827N - 5 - II. If you only w ant to use the Microsoft Zero Configuration Tool to configure the wireless connection, please select Microsoft Zero Configuration Tool and click Next . 3. After that, you will see the next screen as below.
Wireless N USB Adapter User Guide TL-WN827N - 6 - Note: While files are copying, a warning bo x about Windows Logo testing (shown in Figure 2-5 ) may pop up, please click Continue Anyway to continue the installation for our drivers have been tested thoroughly and are able to work with the operating system.
Wireless N USB Adapter User Guide TL-WN827N - 7 - 2.3 Uninst all Software 2.3.1 Uninstall the driver software from your PC 1. On the Windows taskbar, click the Start button, and then click Control Panel . 2. Double-click the Syst em icon, click on the Hardw are tab in the Syste m window.
Wireless N USB Adapter User Guide TL-WN827N - 8 - Figure 2-8 Uninstall the utility 2. Following the Install Shield Wizard to uninstall the utility software from your PC.
Wireless N USB Adapter User Guide TL-WN827N - 9 - Chapter 3 Configuration 3.1 Configuration of Utility TL-WN827N Wireless USB Adapter can be configured by its utilit y for Windows 2000, XP, Vista.
Wireless N USB Adapter User Guide TL-WN827N - 10 - ¾ Activate a profile Figure 3-1 Profile T ab 1. To Add a new profile: Click the Add button on the Profile tab, the Profile configuration screen will appear as shown in Figure 3-2 . Enter the Profile Name and choose the SSID from the pull-down list, then click OK to add it.
Wireless N USB Adapter User Guide TL-WN827N - 11 - ¾ Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Thre shold too low may result in poor network performance since excessive packages.
Wireless N USB Adapter User Guide TL-WN827N - 12 - Figure 3-4 Edit a Profile-Auth.Encry. ¾ Authentication – You can choose the Authentication Type from the pull-down list with three options, Open System , Shared-Key System or LEAP. ¾ 802.1x – It enables when Authenticati on Type is setting to WPA.
Wireless N USB Adapter User Guide TL-WN827N - 13 - choices will appear as Figure 3-5 . Figure 3-5 Network tab ¾ Rescan: Click the Rescan button to refresh the list at any time. ¾ Add to Profile: Highlight an SSID and click the Add to Profile button to add the network to the profile.
Wireless N USB Adapter User Guide TL-WN827N - 14 - function is selected. ¾ Show Authentication Status Dialog- Click the checkbox to sh ow the Authentication Status Dialog.
Wireless N USB Adapter User Guide TL-WN827N - 15 - (PBC) method or PIN method. It is recommended that you choose the simplest method that your AP device supports. ) Note: To build a successful connection by WPS, you s hould also do the corresponding configuration o f the Access Point for WPS function meanwhile .
Wireless N USB Adapter User Guide TL-WN827N - 16 - 3.1.6 Radio On/Off You can turn on/off the wirele ss radio by clicking the icon of the Utility. The green icon will turn to red when the wireless radio is turned off. 3.1.7 About Click the About tab of the Utility and you will see the fo llowing screen with some information about this adapter.
Wireless N USB Adapter User Guide TL-WN827N - 17 - 2. Click the Profile tab of th e utility and click the Add button on the screen that appears. 3. The Profile configuratio n screen will appear, pleas.
Wireless N USB Adapter User Guide TL-WN827N - 18 - ) Note: If you have not installed SP2 for Windows XP, the screen above w ill not be available. 3. During the connection, you will see the screen as Figure 3-13 shown. Figure 3-13 Acquiring network address 4.
Wireless N USB Adapter User Guide TL-WN827N - 19 - Chapter 4 Example for Application 4.1 Configuration of PSP XLink Online game Please ensure the software and hardware environm ents are well established before configuring. For hardware, at least a PC, a TL-WN827N Wireless N USB Adapter and a PSP device are needed.
Wireless N USB Adapter User Guide TL-WN827N - 20 - Step 5. Right-click “ My Computer ”, and select Management . In the prompt page, click Device Manager , then right-click “TL-WN827N 11N wireless adapter “and select Properties. Then set the value of “ PSP Xlink Mode ” as Enable following the red marked instruction in the figure.
Wireless N USB Adapter User Guide TL-WN827N - 21 - Figure 4-3 Step 8. In the prompt page shown below, select Use the Following IP Address , and set the IP and Subnet mask.
Wireless N USB Adapter User Guide TL-WN827N - 22 - Figure 4-5 Step 10. Check whether your PSP device is detect ed in the Diagnostics mode of Kai as Figure 4-6 shown: Click the icon first and then click the folder .
Wireless N USB Adapter User Guide TL-WN827N - 23 - Figure 4-7.
TL-WN827N Wireless N USB Adapter User Guide - 24 - Appendix A: Glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-inp ut multiple-output).
TL-WN827N Wireless N USB Adapter User Guide - 25 - developed by the military for use in reli able, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reliab ility, integrity, and security.
TL-WN827N Wireless N USB Adapter User Guide - 26 - Appendix B: Specifications General Interface A-type USB 2.0 Connector Standards IEEE 802.11n (Draft 2. 0), IEEE 802.1 1 g, IEEE 802.1 1 b Operating System Windows 2000, XP, Vista Transmission Distance In door up to 100m, out door up to 300m (depending on the environment).
Ein wichtiger Punkt beim Kauf des Geräts TP-Link TL-WN827N (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TP-Link TL-WN827N noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TP-Link TL-WN827N - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TP-Link TL-WN827N reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TP-Link TL-WN827N erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TP-Link TL-WN827N besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TP-Link TL-WN827N verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TP-Link TL-WN827N. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TP-Link TL-WN827N gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
