Benutzeranleitung / Produktwartung SG-1801 des Produzenten Toshiba
Zur Seite of 42
OWNER , S MANUAL SG - 18 0 1 The FIRST thing to do after unpacking your new cordless telephone is: CHARGE THE BATTERY ! Please read and follow the few instructions on PAGE 2 BEFORE YOU DO ANYTHING ELSE. 2.4GHz DIGITAL SPREAD SPECTRUM CORDLESS TELEPHONE Preparation Basics Caller ID/Call waiting Additional Information SG-1801.
2 GETTING ST ARTED: DO THIS FIRST! FIRST , CHARGE THE HANDSET BA TTERY! • Set your new phone in an out-of-the-way place near a power outlet where it will not be disturbed. • Plug the AC adaptor into the wall outlet. • Plug the AC adaptor cord into the power jack on the base unit.
INTRODUCTION 3 • 2.4 GHz Digital Spread Spectrum T ransmission with Extended T alk Range • 35 Channel Auto Scanning • 50 Name & Number Caller ID • Caller ID on Call W aiting • Call W ait.
T ABLE OF CONTENTS 4 Preparation INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORT ANT SAFETY INSTRUCTIONS .
T ABLE OF CONTENTS 5 Steps for entering names and special characters . . . . . . . . . . . . . . .24 If you make a mistake while entering a name . . . . . . . . . . . . . . . . . .25 Dialing a stored number . . . . . . . . . . . . . . . . . . . . . . .
6 Preparation IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury . 1 Read and understand all instructions. 2 Follow all warnings and instructions marked on the product.
7 Preparation The RBRC TM Seal The RBRC TM Seal on the (easily removable) nickel-cadmium battery (contained in our product) indicates that T oshiba America Consumer Products, Inc.
8 Preparation HANDSET AC Adaptor T AC-2981 Part # RC009792 LOCA TION OF CONTROLS Modular Line Cord Part # RC008231 SUPPLIED ACCESSORIES: W all Mount Bracket Part #.
LOCA TION OF CONTROLS 9 Preparation BASE UNIT Rechargeable Battery Pack T oshiba TRB-1981 Part # RC009814 Owner ’s manual Part # RC009816 Quick Reference Guide Part # RC009817 For purchase of accessories, please call 1-877-644-7373.
10 INST ALLA TION SETTING UP THE BASE UNIT (DESK TOP MOUNTING) For setting up the base unit follow the instructions below . Snap the bracket ’ s tab into the notches on the base. • Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
11 Preparation SETTING UP THE BASE UNIT (W ALL MOUNTING) MOUNTING ON A ST ANDARD W ALL PLA TE: Insert the bracket ’ s tabs into the base ’ s lower tab slots, then press down on the top of the bracket to snap it into the clip slots. • Route the cords through the guides.
12 Preparation CHARGING THE BA TTER Y P ACK It is important to charge the battery for 12-16 hours continuously without any interruption before you use the handset for the first time. 1 Remove the battery cover on the back of the handset by sliding it down.
13 Preparation INST ALLA TION After the battery pack is fully charged; Operation Approx. battery life While in use (T alk mode) up to 6 hours While not in use (Standby mode) up to 10 days When "Low Battery" blinks on the LCD, all handset buttons except are disabled and the battery needs to be charged.
14 INST ALLA TION Preparation Before using the Handset, make sure to read the following instructions. SETTING THE T ONE/PULSE SWITCH Set the T ONE/PULSE switch to T ONE. Place a call. If the call does not connect with the T ONE setting, set the TONE/PULSE switch to PULSE.
INST ALLA TION 15 SETTING OR CANCELING THE AUTO T ALK FUNCTION If the handset is placed on the base unit, you can answer a call by lifting the handset from the base unit (Auto T alk). If the handset is not on the base unit, you can answer a call by pressing any one of the buttons (Any-key Answer function).
16 INST ALLA TION SETTING THE AREA CODE It is necessary to program your area code so that local calls will be displayed properly on caller ID. 1 Press . 2 Press or to move the pointer to Area Code. 3 Press . Enter your 3-digit area code. For example, enter “ 615.
INST ALLA TION 17 USING THE HEADSET AND BEL T CLIP (OPTION) For purchase of an optional accessory , please call 1-877-644-7373. HEADSET Y ou can use an optional headset (part#: RC 008260) that has a 3/32- inch (2.
18 BASIC OPERA TION Basics T o hang up: press , or return the handset to the base (Auto Standby). TALK NOTE: T o delete a wrong number , press . T o delete all the wrong numbers, press and hold . DELETE DELETE NOTE: T o use Any-key Aunswer and Auto T alk functions, set the Auto T alk to ON (See page 15).
BASIC OPERA TION 19 Basics 3-NUMBER REDIAL Y ou can redial any of the last three numbers dialed from the handset : 1 Press in standby mode. The last dialed number (Redial 1) appears. Each time you press , the LCD displays one of the three last dialed numbers (Redial 1 to Redial 3).
20 BASIC OPERA TION Basics T ONE/P AUSE EXAMPLE : T o make a call “ 0 12345678 ” with tone dialing in pulse mode, press . INTERFERENCE OR ST A TIC If you hear noise during a call, press to select another channel. The LCD displays “ Scanning ” while changing channels.
BASIC OPERA TION 21 P AGING THE HANDSET 1 T o locate the handset while it is off the base, press . The handset beeps for 60 seconds. T o stop paging, press or any key at the handset, or return the handset to the base unit. NOTES: • Y ou cannot page the handset during a call.
22 Basics MEMOR Y DIALING Y ou can store up to 20 telephone numbers and their associated names in the memory . NOTES: • Always press a button within 20 seconds or the phone will return to standby . • If you press a wrong button, an error tone sounds and the handset returns to standby mode.
MEMOR Y DIALING 23 3 Press . 4 T o enter a name, use the number keys. • See the steps for storing names and special characters. (see page 24) • If a name is not required, go to step 5.
24 MEMOR Y DIALING Basics For example, to enter “ Ted Doe ” and 1 - 1 2 3 - 4 5 6 - 7 8 9 0 1 Pick up the handset and press and hold till a beep sounds. 2 Enter a number or press , to select a free memory location number . 3 Press . 4 Press once. 5 Press five times then press to move the cursor to the right.
MEMOR Y DIALING 25 Basics 9 Press five times. 10 When finished, press . 11 Press to be stored. 12 Press . IF YOU MAKE A MIST AKE WHILE ENTERING A NAME Use or to move the cursor to the incorrect character . Press to erase the wrong entry , then enter the correct character .
26 MEMOR Y DIALING Basics EDITING AND DELETING STORED NUMBERS Y ou can delete a number or simply store another one in its place. When you store a new phone number , the data stored in that memory location is deleted automatically . 1 Pick up the handset and press and hold .
MEMOR Y DIALING 27 Basics b DELETING THE STORED DA T A (1) Press or to move the pointer to select or . (2) Press or . If is selected: a confirmation tone sounds and the number is erased. If is selected: the LCD returns to the “ Memory Store ” display .
28 CALLER ID/CALL W AITING NOTES • Before you can take advantage of the Caller ID and Call W aiting features, you must subscribe to these services from your local telephone company . • Name and number caller ID only work in conjunction with service provided by your local telephone company .
29 Caller ID/Call waiting CALLER ID/CALL W AITING SEARCHING CALLER ID MEMOR Y T o review who has called, follow the steps below . The caller ID memory retains a listing of the 50 most recent callers. 1 Pick up the handset and press . If new caller ID data does not exist: If there is new caller ID data: 2 Press to display the latest incoming call.
30 Caller ID/Call waiting CALLER ID/CALL W AITING EDITING CALLER ID DA T A Y ou can edit the Caller ID data. 1 Pick up the handset and press . Then, press or repeatedly to display the Caller ID data you want to edit. 2 Press for a long distance call prefix “ 1 ” and for area code setting and cancellation.
31 Caller ID/Call waiting CALLER ID/CALL W AITING 4 Press . A confirmation tone sounds and the Caller ID data is stored. Press to return to standby . If you select a memory location which is already stored: Press to select “ ” and press . A confirmation tone sounds and the new data overwrites the old data.
32 Caller ID/Call waiting CALLER ID/CALL W AITING DELETE ALL CALLER ID DA T A: 1 Press . 2 Press . Press or to select Yes or No . 3 Press or . If you select , a confirmation tone sounds and the LCD displays “ Total:00 . ” If you select , the LCD displays the number of Caller ID calls.
CALLER ID/CALL W AITING 33 CALL W AITING OPTIONS Y our phone gives you new options for call waiting. At the touch of a button, you can ask the caller to hold, send them to your voice mail service,or conference them into your current call.
34 CALLER ID/CALL W AITING The options you can choose are shown below: Caller ID/Call waiting No. Option Meaning 1 Ask to Hold Prerecorded message asks 2nd caller to hold, and the waiting call is put on hold. 2 T ell Busy Prerecorded message tells 2nd caller you are busy , and the waiting call is disconnected.
35 Should any problem occur with the unit, use the following simple tests to determine whether or not servicing is required. Additional Information SOLUTION • The charging contacts of the handset and base are not clean. → Clean them with a dry cloth.
36 TROUBLESHOOTING Additional Information PROBLEM SOLUTION • The handset is located away from the base or the battery has been discharged. → Return the handset to charge when finished with your call. • The digital security code is changed. → Remove the handset from the base unit and press and hold .
TROUBLESHOOTING 37 When the handset is returned to the base unit with the volume level set at High, a momentary squeal or howling sound may sometimes be heard. The phone does not display the Caller ID/Call W aiting data. Auto talk and Any-key feature do not work.
QUICK REFERENCE GUIDE Read the Owner’ s Manual for details. CALLER ID CORDLESS TELEPHONE SG-1801 UCZZ69738BZ RC009817 Printed in China SETTING UP THE BASE UNIT CHARGING THE BA TTER Y P ACK Black Red IN USE/ CHARGE LED Charging contacts SETTING / USING THE PHONE 1 Press FUNCTION , then press 3 .
REFERENCIA RÁPIDA Para los detalles, lea el manual de instrucciones (en inglés). CALLER ID CORDLESS TELEPHONE SG-1801 UCZZ69738BZ RC009817 Printed in China INST ALACIÓN DE LA UNIDAD BASE CARGA DE LA BA TERÍA AJUSTE/UTILIZACIÓN DEL TELÉFONO SER VICIO DE IDENTIFICACIÓN DEL QUE LLAMA Afirme el cable del adaptador de CA.
38 W ARRANTY/SER VICE Additional Information SER VICE REQUIREMENTS If the cordless telephone should malfunction, or need changes or modifications, all repairs will be performed by an authorized T oshiba Service Station. This unit has been registered with the FCC for direct connection to the telephone network.
W ARRANTY/SER VICE TELEPHONE/TELEPHONE ANSWER MA CHINE LIMITED W ARRANTY T oshiba America Consumer Products, Inc. (“T A CP”), and T oshiba Haw aii, Inc.
For technical assistance, purchase of accessories or service, please access www .toshiba.com/tacp. UCZZ01738BZ RC009816 Printed in China IMPORT ANT We suggest you record the following information and retain for your records along with your bill of sale or equipment document.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba SG-1801 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba SG-1801 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba SG-1801 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba SG-1801 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba SG-1801 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba SG-1801 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba SG-1801 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba SG-1801. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba SG-1801 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
