Benutzeranleitung / Produktwartung SD-V395KC des Produzenten Toshiba
Zur Seite of 49
Mémo de l’utilisateur La désignation du modèle et le numéro de série se trouv ent à l’arrière de votre D VD/V CR. Consignez ces numéros dans les espaces ci-dessous et communiquez-les à votre r ev endeur T oshiba chaque f ois que vous le consultez au sujet de cet D VD/V CR.
2 Introduction SAFETY PRE CA UTIONS W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NO T EXPOSE THIS APPLIANCE T O RAIN OR MOIS TURE. CA UTION: T O PREVENT ELEC TRIC SHOCK DO NO T USE THIS POLARIZED PL UG WITH AN EXTENSION CORD , RECEPT ACLE OR O THER OUTLET UNLESS THE BLADES CAN BE FULL Y INSER TED T O PREVENT BLADE EXPOSURE.
3 Introduction 1. READ INSTR UCTIONS All the saf ety and operating instructions should be r ead bef ore the unit is operated. 2. RET AIN INSTRUC TIONS The saf ety and operating instructions should be r etained for futur e ref erence . 3. HEED W ARNINGS All w arnings on the unit and in the operating instructions should be adhered to .
4 Introduction IMPOR T ANT SAFE GU ARDS 14. POWER LINES An outside antenna s ystem should not be located in the vicinity of o verhead po wer lines or other electric light or pow er circuits, or wher e it can fall onto or against such po wer lines or cir cuits.
5 Introduction 19. REPLACEMENT P AR TS When r eplacement parts are required, be sure the service technician uses replacement parts specified by the manufactur er or those that hav e the same characteristics as the original part. Unauthoriz ed substitutions ma y result in fire , electric shock or other hazar ds.
6 Introduction Notes on handling When shipping the DVD/V CR, the original shipping carton and packing materials come in handy . For fully protection, repack the unit as it w as originally pack ed at the factory . Do not use volatile liquids, such as insect spr ay , near the D VD/V CR.
7 Introduction Structure of disc contents Normally , DVD video discs ar e divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks .
8 Introduction Pla y able discs This D VD/V CR can play the follo wing discs. Disc Mark Contents Disc Size Maximum playback time D VD video discs Audio + Video (moving pictures) 12 cm Appro x. 4 hours (single sided disc) Appro x. 8 hours (double sided disc) 8 cm Appro x.
9 Introduction Contents Introduction SAFETY PREC A UTIONS ..................................2 IMPOR T ANT SAFEGU ARDS .............................3 P ower source .....................................................5 Precautions .....................
10 Introduction Identi fi cation of controls See the page in for details. ON/ST ANDB Y button 22 A UDIO (L/R)/VIDEO IN (LINE IN 2) jacks 31 EJECT button 25 Disc tra y 32 Display windo w 11 REC button.
11 Introduction While watching TV 8 : 30 AM MON 00 : 15 : 12 SP HI-FI STE REO While operating a tape OPERA TING MODE T APE IN A UT O REPEA T HI-FI STERE O Press CALL to displa y V CR operation status on the screen. T o cancel the displa y , press CALL again.
12 Introduction VCR D VD button EJECT button (V CR) ZERO RETURN button JUMP button ZOOM button T OP MENU button CLEAR button INDEX - button MARKER button COUNTER RESET button V CR MENU button 22 25 33.
13 Introduction Inserting batteries Caution: Nev er throw batteries into a fire. Notes: Be sure to use AAA size batteries . Dispose of batteries in a designated disposal area. Batteries should alwa ys be disposed of with the environment in mind. Alw ay s dispose of batteries in accordance with applicable law s and regulations.
14 Connections 14 Connections Antenna to D VD/V CR connection The D VD/V CR must be connected “between” the antenna and the TV . First, disconnect the antenna from the TV and connect it to the D VD/V CR. Then connect the DVD/V CR to the TV . Below are 3 common methods of connecting an antenna sy stem to a D VD/V CR.
15 Connections 15 VHF/UHF IN 75 ohm Coaxial Cable (supplied) TV Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. TV with single 75 ohm VHF/UHF antenna input Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode.
16 Connections 16 Connections Many cable companies off er services permitting reception of extr a channels including pay or subscription channels . This D VD/V CR has an extended tuning range and can .
17 Connections 17 IMPOR T ANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This D VD/V CR cannot receive scrambled progr ams since it does not contain a descrambler . In order to receive scrambled programs , y our e xisting descrambler must be used.
18 Connections 18 Connections Notes: Ref er to the owner’ s manual of the connected TV as well. When you connect the D VD/VCR to y our TV , be sure to turn off the power and unplug both units fr om the wall outlet be fore making any connections .
19 Connections 19 Notes: Ref er to the owner’ s manual of the connected equipment as well. When you connect the D VD/VCR to other equipment, be sur e to turn off the power and unplug all of the equipment fr om the wall outlet be fore making an y connections.
20 Connections 20 Connections Connecting to an amplifier equipped with a D TS ® decoder Digital Theater Sy stems (D TS) D TS is a high quality surround technology used in theaters and no w av ailable for home use, on D VD video discs or audio CDs. If you ha ve a D TS decoder or processor , you can obtain the full benefit of 5.
21 Connections 21 Connecting to an amplifier equipped with a MPEG2 audio decoder MPEG2 sound Y ou can enjoy motion picture and liv e concert DVD video discs encoded via the MPE G2 recording s ystem with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPE G2 audio processor .
22 Basic setup (V CR) 22 Basic setup (V CR) Preparation: T urn ON the TV and select to the corresponding video input. Press VC R DV D selector to select the V CR mode. (The VCR mode indicator will light.) • • 1 Press V CR MENU . The VCR menu screen will appear .
23 Basic setup (V CR) 23 1 Press V CR MENU . 2 Press SET + or – to select “S Y STEM SETUP”, then press ENTER . 3 Press SET + or – to select “ A UT O CLOCK”. 4 Press ENTER to select “off ”. 5 Press V CR MENU repeatedly to return to the normal screen.
24 Basic setup (V CR) T o set D A YLIGHT SA VING TIME Y ou can set the D A YLIGHT SA VING TIME automatically or manually . 1 Press V CR MENU . Press SET + or – to select “S Y STEM SETUP”, then press ENTER . 2 Press SET + or – to select “D A YLIGHT SA VING TIME”, then press ENTER .
25 Playback (V CR) Basic setup (V CR) Basic setup (V CR)/ Playback (V CR) T o ADD/DELETE channels 1 Press V CR MENU . Press SET + or – to select “CH SETUP”, then press ENTER . 2 Press SET + or – to select the “ ADD/DELETE” and press ENTER .
26 Playback (V CR) Cassette tape playback T o play a pr e-recorded tape . Pla yback Re wind or forwar d the tape Preparation: T urn ON the TV and select the corresponding video input. Press V CR DVD selector to select the V CR mode. (The V CR mode indicator will light).
27 Playback (V CR) Press CLOCK/COUNTER . The clock and tape counter alternate with each other in the display windo w . COUNTER CLOCK Press VC R DV D selector .
28 28 Recording (V CR) Preparation: T urn ON the TV and select to the corresponding video input. Press V CR DVD selector to select the V CR mode. (The V CR mode indicator will light.) • • 1 Load a cassette tape with the erase pr ev ention tab intact.
29 29 Recording (V CR) 1 Load a cassette tape with the erase pr ev ention tab intact. The VCR will automatically turn on. • 2 Press SP/SLP to select the desired tape speed SP or SLP . The tape counter and “SP” or “SLP” will appear on the screen f or about 4 seconds.
30 Recording (V CR)/Other functions (V CR) W eekly (e.g. WKL - TU: each T uesda y) or daily (e.g. MO-SA: Monday to Saturda y) Timer recording Follo w the procedure of timer r ecording on page 29 . At step 3 , press SET + or – r epeatedly until the desired setting appears.
31 Other functions (V CR) Preparation: T urn ON the TV and select the corresponding video input. Press V CR DVD selector to select the VCR mode . (The V CR mode indicator will light.) Load a cassette tape with the erase pr ev ention tab intact. Load a pre viously recorded tape into the playback VCR or Camcorder .
32 Playback (D VD) 1 Press ON/S T ANDB Y . The D VD/V CR turns on. • 2 Press V CR/DVD to select the D VD mode. The D VD indicator will light. • 3 Press OPEN/CLOSE . The disc tra y opens. • 4 Place a disc on the disc tra y . With the playback side do wn There are tw o different disc siz es.
33 Playback (D VD) Press REV or FWD during pla yback. REV : Fast r ev erse pla yback FWD: Fast f orward pla yback Each time you pr ess REV or FWD , the playback speed changes. • ■ T o resume normal playback Press PLA Y . Notes: The D VD/V CR mutes sound and subtitles during reverse and forwar d scan of D VD/V CD/Audio CD discs.
34 Playback (D VD) VCD Progr am pla yback 1 Press PLA Y MODE during stop mode. 2 Press ▲ / ▼ to select “Mode”, then press ENTER repeatedly to select “Program”. 3 Press ◀ / ▶ to select the programming position. Use Number buttons (0–9) to input the track numbers.
35 Playback (D VD) VCD Random pla yback 1 Press PLA Y MODE during playback or stop mode . 2 Press ▲ / ▼ to select “Mode”, then press ENTER repeatedly to select “Random”.
36 Playback (D VD) 1 Press SUB TITLE repeatedly during pla yback until your desir ed language is selected. 2 T o turn off the subtitle, pr ess SUBTITLE until “Off ” appears. The on screen displa y will disappear after a fe w seconds. • Notes: Depending on the D VD , you may not be able to change subtitles, or to turn subtitles on or off .
37 Playback (D VD) MP3/WMA/JPEG/DivX ® and Audio CD operation This play er can pla yback the MP3/WMA/JPEG/DivX ® -data which has been recorded on CD-R or CD-R W . T o produce the MP3/ WMA/JPEG/DivX ® -data, y ou need a Window s-PC with CD-RW driv e and a MP3/WMA/JPEG/DivX ® -encoding Softw are (not supplied).
38 Playback (D VD) CD MP3/WMA CD and Audio CD pla yback 1 Place an Audio CD or a disc on which MP3 or WMA files hav e been recorded onto the disc tr a y . 2 A file brow ser screen will appear on the screen. 3 Press ▲ / ▼ to select the desired file .
39 Playback (D VD) 1 In the file brow ser , press ◀ / ▶ / ▲ / ▼ to select “R epeat” in stop mode. Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 Select Files Repeat :Off Mode :Off 2 Press ENTER repeatedly to select “T rack” or “ All”. Folder-1 Folder-2 MP3-1 MP3-2 MP3 3 Select Files Repeat :T rack Mode :Off 3 Press PLA Y .
40 Playback (D VD) CD Random pla yback (CD) 1 In the file brow ser , press ◀ / ▶ / ▲ / ▼ to select “Mode” in stop mode. Folder-1 Folder-2 MP3-1 MP3-2 MP3 - 3 Select Files Repeat :Off Mode :Off 2 Press ENTER to select “Random”. Folder-1 Folder-2 MP3-1 MP3-2 MP3 - 3 Select Files Repeat :Off Mode :Random 3 Press PLA Y .
41 F unction setup (D VD) F unction setup (D VD) Playback (D VD) DVD VCD CD Setting procedur e 1 Press SETUP in stop mode. The follo wing on-screen displa y appears. • Parental : Off Set Passw ord Output : Interlace DivX(R) V OD DRC : Off QSound : On E.
42 F unction setup (D VD) ■ Screen Sav er The screen sa ver operates when y ou leave the unit in D VD stop mode for appr o x. five minutes. The D VD VIDEO logo moves r andomly on the screen. Off: Screen Sa ver function is in v alidated. On: Screen Sa ver function is made eff ective.
43 F unction setup (D VD) Notes: The parental control le vel is equiv alent to the following USA movie r atings. Le vel 1: G Le vel 5: Le vel 2: Le vel 6: R Le vel 3: PG Le vel 7: NC-17 Le vel 4: PG-13 Lev el 8: The parental control le vels f or other countries/area than U .
44 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “ Audio” 41 . Language Name Code Language Name Code Language Name Code Lan.
45 Others Symptoms Solutions P age D VD/V CR D VD/V CR does not operate. Make sur e the power cor d is plugged in. T ry another AC outlet. Unplug unit, then plug it back in. Select the D VD or VCR mode bef ore operating. • • • • 5 – 5 26, 32 No picture.
46 Others Speci fi cations This model complies with the abov e specifications. Designs and specifications are subject to change without notice. This model may not be compatible with f eatures and/or specifications that ma y be added in the future .
47 Others F or T oshiba Brand D VD Play ers, D VD Recor ders, D VD/V CR Combo Pla y ers and P or table D VD Play ers T oshiba of Canada Limited (“ TC L ”) makes the follo wing limited warr anties to original consumers in Canada.
48 Others Y OU MUST READ AND FOLLO W ALL SET -UP AND USA GE INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR MANU ALS. IF Y OU F AIL T O DO SO , THIS PLA YER MA Y NOT FUNC TION PROPERL Y AND Y OU MA Y SUFFER D AMA GE.
49 Others Memo ............................................................................................................................... ..... ......................................................................................................
Ein wichtiger Punkt beim Kauf des Geräts Toshiba SD-V395KC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba SD-V395KC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba SD-V395KC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba SD-V395KC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba SD-V395KC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba SD-V395KC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba SD-V395KC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba SD-V395KC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba SD-V395KC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
