Benutzeranleitung / Produktwartung SD-6980SU des Produzenten Toshiba
Zur Seite of 76
2005 T oshiba Corporation DVD VIDEO PLA YER SD-6980SU OWNER’S MANUAL C 00839A-SD-6980SU-Cover 6/29/05 8:58 AM Page 3.
ENG-2 Safety Precautions TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE P AR TS ARE INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.
ENG-3 Introduction Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
ENG-4 Introduction FCC W ARNING : This equipment may generate or use radio frequency energy . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.
ENG-5 Introduction • The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular , this product is licensed under th.
Install Batteries in the Remote control 1 Open the battery cover on the back of the remote control. Operating with the remote control Point the remote control at the remote sensor and press the buttons. Distance : Approx. 7m(23 feet) from the front of the remote sensor .
ENG-7 T able of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENG-8 General Features Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. Screen Both regular and widescreen(16:9) pictures can be viewed. Slow Motion An important scene can be viewed in slow motion.
ENG-9 Introduction Introduction T o ensure proper use of this product, please read this owner ’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD Home Theater System. Should the unit require service, contact an authorized service location.
ENG-10 T ype of Playable Discs This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Markings Region Number Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play .
ENG-11 Introduction Front Panel Front Panel Display 1. ON/ST ANDBY( ) Use to turn your player on and off (standby). 2. POWER Indicator This indicator will lights up when the power is on. 3. DISC TRA Y Place the disc here. 4. DISPLA Y Operation indicators are displayed here.
ENG-12 Rear Panel 1. 5.1CH ANALOG AUDIO OUT JACKS - Connect to an amplifier with 5.1ch analog input jacks. 2. DIGIT AL AUDIO OUT JACKS - Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver .
ENG-13 Introduction Remote Control 1. OPEN/CLOSE ( ) Button T o open and close the disc tray . 2. NUMBER Buttons 3. INPUT Button Selects Video input connection in TV mode. 4. DVD Button Press this to operate DVD Player . 5. TV Button Press this to operate TV .
ENG-14 Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player , TV , and other components before you connect or disconnect any cables.
ENG-15 Connections Connection to a TV (S-Video) - Connecting to your TV using an S-V ideo cable. - Y ou will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode.
ENG-16 Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - Y ou will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(P B ), red(P R ) signals to present clear and clean images.
ENG-17 Connections Connection to a TV (Progressive) Note - What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality .
ENG-18 Connecting to a TV with HDMI Jack 1 Using the HDMI cable, connect the HDMI OUT terminal on the rear of the DVD player to the HDMI IN terminal of your TV . 2 Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen.
ENG-19 Connections • HDMI (High Definition Multimedia Interface) HDMI is an interface to enable the digital transmission of video and audio data with just a single connector . Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
ENG-20 Note - Please turn the volume down when you turn on the Amplifier . Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of terminals may vary depending on the Amplifier .
ENG-21 Connections Note - Please turn the volume down when you turn on the Amplifier . Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of terminals may vary depending on the Amplifier .
ENG-22 Note - Please turn the volume down when you turn on the Amplifier . Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of terminals may vary depending on the Amplifier .
ENG-23 Basic Functions Playing a Disc Before Play - T urn on your TV and set it to the correct V ideo Input on the TV's remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
ENG-24 6 Pausing Play Press the PLA Y/P AUSE () or STEP button on the remote control during play . ▼ Screen stops, no sound. T o resume, press the PLA Y/P AUSE ( ) button once again. Note If the player is left for about 5 minutes in pause mode, it will stop.
ENG-25 Basic Functions Using the Search and Skip Functions During play , you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or T rack During play , press the SEARCH (o r ) button on the remote control for more than 1 second.
ENG-26 Using the Display Function When Playing a DVD/VCD/CD/MPEG4 1 During play , press the DISPLA Y button on the remote control. ▼ Y ou can select Info in the function menu by pressing the MENU button. 2 Press the … / † buttons to select the desired item.
ENG-27 Basic Functions 4 T o make the screen disappear , press the DISPLA Y button again. Note T o access the desired title when there is more than one in the disc.
ENG-28 Using the Disc and Title Menu Using the Disc Menu (DVD) 1 During the playback of a DVD disc, press the SETUP button on the remote control. 2 Press the … / † buttons to select Disc Menu , then press the √ or ENTER button. Note - Depending on a disc, the Disc Menu may not work.
ENG-29 Basic Functions Using the Function Menu Using the Function Menu (DVD/VCD) 1 Press the SETUP button during playback. 2 Press the … / † buttons to select Function , then press the √ or ENTER button.
ENG-30 Repeat Play Repeat the current track, chapter , title, a chosen section (A-B), or all of the disc. When playing a DVD/VCD/CD 1 Press the REPEA T button on the remote control. Repeat screen appears. 2 Press the œ / √ buttons to select Chapter , Title or A-B , then press the ENTER button.
ENG-31 Basic Functions Slow Repeat Play This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being played etc., so you can study them more closely . When playing a DVD/VCD 1 During play , press the PLA Y/P AUSE ( ) button.
ENG-32 Program Play & Random Play Program Play (CD) Program Play allows you to select the order in which you want tracks to play . 1 During play , press the PROGRAM button. Random Play (CD) Random Play plays a disc's tracks in random order . 1 Press the PROGRAM button.
ENG-33 Advanced Functions Selecting the Audio Language Y ou can select a desired audio language quickly and easily with the AUDIO button. Using the AUDIO button (DVD/VCD/CD) 1 Press the AUDIO button. The Audio changes when the button is pressed repeatedly .
ENG-34 Selecting the Subtitle Language Y ou can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button (DVD/MPEG4) 1 Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly . The subtitle languages are represented by abbreviations.
ENG-35 Advanced Functions Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the Angle Function (DVD) If the disc contains multiple angles, the ANGLE appears on the screen. 1 During play or pause mode, press the SETUP button on the remote control.
ENG-36 Using the Instant Replay/Skip Function Using the Instant Replay function (DVD) If you miss a scene, you can see it again using this function. Press the REPLA Y button.
ENG-37 Advanced Functions Using the Marker Function This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them at a later time. Using the Marker Function (DVD/VCD) 1 During play , press the MARKER button on the remote control.
ENG-38 Recalling a Marked Scene 1 During play , press the MARKER button on the remote control. 3 Press the PLA Y/P AUSE ( ) button to skip to the marked scene. 2 Press the œ / √ buttons to select a marked scene. Clearing a Marker 1 During play , press the MARKER button on the remote control.
ENG-39 Advanced Functions Using the Zoom Function Using the Zoom Function (DVD/VCD) 1 During play , press the ZOOM button on the remote control. Using the SETUP button. During play or pause mode, press the SETUP button on the remote control. Press the … … / † † buttons to select Zoom , then press the √ or ENTER button.
ENG-40 3 Depending on the file type stored on the Memory card, audio files will be played the same way as MP3/WMA files and picture files will be played the same way as Picture CD’s files. (See pages 48 to 54) 1 Insert a Memory Card. 2 Press the DVD/CARD button on the remote control.
ENG-41 Advanced Functions 5 T o make the screen disappear , press the DISPLA Y button again. DVD AUDIO Playback 1 Open the disc tray . Place the DVD AUDIO disc on the tray . - Place the DVD AUDIO disc with the labeled side up. Close the tray . - The tray closes and disc plays.
ENG-42 Note Most DVD AUDIO discs are recorded in Groups you can change Groups with this Function. Bonus Group playback. Some DVD AUDIO discs have Bonus groups. If you want to play a Bonus group, you must enter the Bonus Group code. The code is usually on the DVD AUDIO disc case.
ENG-43 Advanced Functions REPEA T Play 1 Press the REPEA T button on the remote control. Repeat screen appears. 2 Press the œ / √ buttons to select T rack , Group , then press the ENTER button. ▼ T rack ( ): repeats the title that is playing. Group ( ): repeats the group that is playing.
ENG-44 Super Audio CD Playback 1 Open the disc tray . Place the Super Audio CD disc on the tray . - Place the Super Audio CD disc with the labeled side up. Close the tray . - The tray closes and you should get a screen. Super Audio CD Clips Menu On Play Function 1 Use the … / † buttons to select a music title.
ENG-45 Advanced Functions 5 T o make the screen disappear , press the DISPLA Y button again. Super Audio CD Clips Menu Off Play Function 1 In Stop mode, press the DISC MENU button until the Clips menu is off. 2 During play , press the DISPLA Y button on the remote control.
ENG-46 Note (SACD) T o access the desired T rack when there is more than one in the disc. (SACD) Allows playback from a desired time by using the number buttons. (SACD) If you want to change the 2 channel or multi channel mode in play or stop mode, press AUDIO button.
ENG-47 Advanced Functions Clips Menu for MP3/WMA/JPEG/MPEG4 Discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can be organized into folders as shown below . They are similar to how you use your computer to put files into different folders.
ENG-48 MP3/WMA Playback 1 Open the disc tray . Place the disc on the tray . Close the tray . ▼ When a disc that contains both MP3 and WMA files, only one type will play , not both. 2 Press the … … / † † or œ / √ buttons to select a song file.
ENG-49 Advanced Functions MP3/WMA file When you record MP3 or WMA files on CD-R/Memory Card, please refer to the following. - Y our MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac.
ENG-50 MPEG4 Playback MPEG4 Play Function A VI files are used to contain the audio and video data. Only A VI format files with the “.avi” extensions can be played. 1 Open the disc tray . Place the disc on the tray . Close the tray . 2 Press the … … / † † or œ / √ buttons to select an avi file (DivX/XviD), then press the ENTER button.
ENG-51 Advanced Functions Note - Some MPEG4 files created on a personal computer may not be play back. That is why Codec T ype, V ersion and Higher resolution over specification is not supported. - This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
ENG-52 Picture CD Playback 1 Select the desired folder . Note - If no buttons on the remote control are pressed for 10 seconds, the menu will disappear . - Press the STOP button to return to the clips menu. - When playing a Kodak Picture CD, the unit displays the Photo directly , not the clips menu.
ENG-53 Advanced Functions Picture CD Playback for HD-JPEG Must connect to HDMI. Resolution should be 720p or 1080i, and HD-JPEG should be in HD mode. (See page 64) 2 Select the desired folder .
ENG-54 JPEG Discs When playing a CD-R/Memory Card/Picture CD - Only files with the “.jpg” and “.JPG” extensions can be played. - If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. - Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
ENG-55 Changing Setup Menu Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. ΠLanguage Setup : Setup of the Language.
ENG-56 Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Player Menu Language 1 With the unit in Stop mode, press the SETUP button.
ENG-57 Changing Setup Menu Using the Disc Menu Language This function changes the text language only on the disc menu screens. 4 Press the … … / † † buttons to select Disc Menu , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button.
ENG-58 Using the Audio Language 4 Press the … … / † † buttons to select Audio , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button.
ENG-59 Changing Setup Menu Using the Subtitle Language 4 Press the … … / † † buttons to select Subtitle , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button.
ENG-60 Setting Up the Audio Options Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use. 3 Press the … … / † † buttons to select Audio Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select the desired item, then press the √ or ENTER button.
ENG-61 Changing Setup Menu Note • T o exit the setup menu, press the SETUP button. • DVD-AUDIO - Outputs 2 channel digital audio only . - Some DVD-AUDIO discs do not downmix, so they will not output 2 channel digital audio. - MUL TI channel DVD-AUDIO discs play back through the analog outputs.
ENG-62 Surround Sound Speaker Setup 3 Press the … … / † † buttons to select Audio Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select Speaker Setup , then press the √ or ENTER button. 1 With the unit in Stop mode, press the SETUP button.
ENG-63 Changing Setup Menu The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small). Select the size of the speakers to be connected. ΠFront (FL, FR) - Large: Normally select this. - Small: When the sound distorts or the surround sound effects are dif ficult to hear , select this.
ENG-64 Setting Up the Display Options Display options enable you to set various video functions of the player . 3 Press the … … / † † buttons to select Display Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select the desired item, then press the √ or ENTER button.
ENG-65 Changing Setup Menu ΠTV Aspect Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio). - 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen.
ENG-66 Ø HDMI This setting is used when the unit is connected by HDMI to Display devices (TV , Projector , etc.). - Resolution setting • Auto : Resolution setting automatically • Manual : Resolut.
ENG-67 Changing Setup Menu Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
ENG-68 Setting Up the Rating Level 2 Press the … … / † † buttons to select Parental Setup , then press the √ or ENTER button. 3 Enter your password. 4 Press the … … / † † buttons to select Rating Level , then press the √ or ENTER button.
ENG-69 Changing Setup Menu Changing the Password 3 Press the … … / † † buttons to select Parental Setup , then press the √ or ENTER button. The Enter Password screen appears. Enter your password. 4 Press the … … / † † button to select Change Password , then press the √ or ENTER button.
ENG-70 Reference Setting Control Codes 1. Press TV to set the remote control operating your TV . 2. While holding down PROGRAM button enter the two diglts of your TV’ s brand code (listed right) using number buttons.
ENG-71 Reference Reference T roubleshooting Before requesting service (troubleshooting), please check the following. No operations can be performed with the remote control. The screen ratio cannot be changed. No audio. Play mode differs from the Setup Menu selection.
ENG-72 Reference No HDMI output. HDMI output jitter No Component video outputs in JPEG playback. Abnormal HDMI output screen. • Check the Video output is HDMI enabled. • Check the connection between the TV and the HDMI jack of DVD player . • See if the TV supports this 480p/720p/1080i DVD player .
ENG-73 Reference Reference Specifications Power Requirements Power Consumption Weight Dimensions Operating T emperature Range Operating Humidity Range DVD (DIGIT AL VERSA TILE DISC) CD : 3 1/2 " (COMP ACT DISC) CD : 8Cm (COMP ACT DISC) VCD : 3 1/2 " Composite Video Component Video S-Video HDMI 2 Channel 5.
ENG-74 T oshiba America Consumer Products, L.L.C. ("T ACP") makes the following limited warranties to original consumers in the United States.
ENG-75 Reference (5) W arranties extend only to defects in materials or workmanship as limited above, and do not extend to any DA V Product or parts that have been lost or discarded by you or to damag.
AK68-00839A-00 SmartMedia is a trademark of T oshiba Corp. T oshiba is an authorized licensee of the Compact Flash® registered trademark. SD is a trademark of SD Card Association. MMC and MultiMedia Card are trademarks of Infineon T echnologies AG and licensed to MMCA (MultiMediaCard Association).
Ein wichtiger Punkt beim Kauf des Geräts Toshiba SD-6980SU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba SD-6980SU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba SD-6980SU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba SD-6980SU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba SD-6980SU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba SD-6980SU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba SD-6980SU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba SD-6980SU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba SD-6980SU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
