Benutzeranleitung / Produktwartung IP5000-UG-VB des Produzenten Toshiba
Zur Seite of 216
T elecommunication Systems Division April 2009 IP5000-Series T elephone User Guide ®.
Publication Inf ormation T oshiba America Information Systems, Inc., T elecommunication Systems Division, re serves the right, without prior notice, to revise this information publication for any reason, including, but no t limited to, utilization of new advances in the state of technica l arts or to simply change the design of this document.
TOSHIBA AMERICA INFORMA TION SYSTEMS, INC. ( “ T AIS ” ) T elecommunication Systems Division License Agr eement IMPORT ANT : THIS LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND T AIS. CAREFULL Y READ THIS LICENSE AGREEMENT .
T oshiba America Infor mation Systems, Inc. T elecommunication Systems Division End-User Limited W arranty T oshiba America Information Systems, Inc., (“T AIS”) warrants that this telephone equipm.
W ARRANTIES FOR NON-TOSHIBA BRANDED THIRD P ARTY PRODUCTS A valuable element of T oshiba’s product strategy is to of fer our customers a complete product portfolio .
This page is i ntentionally l eft blank..
Strata CIX IP5000-series T elephone UG 04/09 i Contents Introduction Organization ....................................... ............................... ................................ ..................ix How to Use This Guide......................
Contents Chapter 3 – SoftIPT ii Strata CIX IP5000-series T e lephone UG 04/09 Telephone Terminology .............................. .... ........................... ................................ ........ 20 Making a Call ..........................
Contents Chapter 4 – Feature Oper ations Strata CIX IP5000-series T elephone UG 04/09 iii Chapter 4 — Feature Operations Account Code Calls .................. ............................... ................................ .......................
Contents Chapter 4 – Feature Operations iv Strata CIX IP5000-series T e lephone UG 04/09 Echo Cancellation ......................... ................................ ............................... ...................... 68 Emergency Call ..........
Contents Chapter 5 – IP51 22-SDC Strata CIX IP5000-series T elephone UG 04/09 v Chapter 5 — IP5122-SDC Making and Answering Calls...................... ............................... ................................ ........ 90 Local Emergency Service (Calling 911) .
Contents Chapter 7 – Headset and Handset Operation vi Strata CIX IP5000-series T e lephone UG 04/09 Chapter 7 — Headset and Handset Operation Recommended Headsets ................................. ................................ .................
Contents Chapter 10 – Info ManagerTM Strata CIX IP5000-series T elephone UG 04/09 vii Advanced Network Settings ...................................... ............................... ....................145 Sound Settings ...........................
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 ix Intr oduction This user guide describes how to use the Toshiba IP5000-series telephones with the Strata CIX670, CIX200, CIX100, CIX100-S , and CIX40 telephon e systems. These include: • Strata IP5000-series digital tele phones shown in T able 1 on Page 2 .
Introd uction How to Use This Guide x Strata CIX IP5000-series T e lephone UG 04/09 • Chapter 9 – Administrator Programming explains features and functions to be performed by an Administrator . • Appendix A – Refer ences includes tables that support procedures in the Basic and Feature Operation chapters.
Introd uction How to Use This Guide Strata CIX IP5000-series T elephone UG 04/09 xi Con ventions Desc ription [DN] Represents any Directory Numb er button, also known as an extension or intercom number . T elephones can have multiple extensions. Incoming calls ring extensions bottom to top.
Introd uction Related Documents/Media xii Strata CIX IP5000-series T e lephone UG 04/09 Related Documents/Media Note Some documents listed here may appear in different versions o n the electronically or in print. T o find th e most current version, check the version/ date in the Publication In formation on the back of the document’ s title page.
Strata CIX IP5000-series T elephone UG 04/09 1 The Grand T our 1 The IP5000-series telephones connected to a Strata CIX telephone system, running Release 5.2 or higher software, include a selection of IP telephone models and matching IP add-on modu les, as well as a 60 button DSS Console.
The Grand T our 2 Strata CIX IP5000-series T ele phone UG 04/09 T able 1 IP5000 Seri es T elephones Description Image 10 Button IP T elephone: • 4 line LCD with back light option • Full duplex S p.
The Grand T our Strata CIX IP5000-series T elephone UG 04/09 3 The IP5000-series telephone upgrade option s includ e: T able 2 IP5000 Series Add-on Mo dules Description Image 10 Button ADM for IP5000-.
The Grand T our IP5000-series T elephone Ov er vi ew 4 Strata CIX IP5000-series T ele phone UG 04/09 IP5000-series T elephone Overview The illustration of the IP5000- series telephone shown belo w gives a general idea of the basic attribut es found on most of these telephones.
The Grand T our IP5000-series T elephone Overvi ew Strata CIX IP5000-series T elephone UG 04/09 5 Fixed Buttons The fixed buttons on the dial pad help perfo rm standard functions quickly and easily . Layout s Fixed buttons are laid out diff eren tly on the IP5000-series telephones.
The Grand T our IP5000-series T elephone Ov er vi ew 6 Strata CIX IP5000-series T ele phone UG 04/09 The Fixed buttons are describe d below . T able 3 Fixed Button De finitions Button Definitions Message (Msg): When Msg LED flashes, press Msg to call back the station or voice mail device that ac tivated the LED.
The Grand T our IP5000-series T elephone Overvi ew Strata CIX IP5000-series T elephone UG 04/09 7 Navigation Key: Round button o n th e IP5131 telephone is a navigation key used for moving t he cursor o n html pages and in the programmin g screens. C enter of th e button is the “selec t” functio n.
The Grand T our IP5000-series T elephone Ov er vi ew 8 Strata CIX IP5000-series T ele phone UG 04/09 Programmable Feature Buttons Programmable Feature Buttons are programmed by the System Administrator and can be customized on a per user basis. See T able 24 on page 184 for a list of Programmable Feature Buttons.
The Grand T our LCD Strata CIX IP5000-series T elephone UG 04/09 9 LCD 9-Line LCD Display The LCD on the 9-Line LC D telephone (sh own below) in idle state shows: T op to Bottom Line 1 or the top line of the LCD will di splay your user name (if programmed) and your extension numb er .
The Grand T our LCD 10 Strata CIX IP5000-series T ele phone UG 04/09 Browser Note This feature applies to the IP5131-SDL telephone. T oshiba’ s IP5131-SDL with it’ s large display screen also supports an HTML browser to allow navigation on the W orld W ide W eb or a com pan y’ s intranet.
Strata CIX IP5000-series T elephone UG 04/09 11 Sof t Keys Softkeys (SK1 - SK4) refer to the four buttons directly below the LCD screen (shown right). Soft Keys dynamically change their functions and label depending on the state of the telepho ne.
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 13 The Basics 2 This chapter reviews the basic operations of the IP5000-series telephones. The instructions apply to a ll telephone model s, except when noted otherwise.
The Basics Customizing Y our T el ephone 14 Strata CIX IP5000-series T ele phone UG 04/09 T o adjust handset Beep T one 1. W ith the handset of f-hook, dial the Beep T o ne Adjustment Code #6101 (default code). Y ou hear beep tone . 2. Press Vo l or Vo l to reach the desired level.
The Basics Customizing Y our T elephone Strata CIX IP5000-series T elephone UG 04/09 15 Brightness Control A vailable on backlit telephones with 4-line LCD’ s and back lit add-on module. T o change the LCD back light brigh tness 1. Press Hold + 3 + 6 + 9 (simultaneou sly).
The Basics Customizing Y our T el ephone 16 Strata CIX IP5000-series T ele phone UG 04/09 Backlight On/Off A vailable on backlit telephon es and backlit add-on module. T o change Backlight Settings 1. Press Hold + 3 + 6 + 9 (simultaneou sly). 2. Press the Mic button.
The Basics K eystrip Labels Strata CIX IP5000-series T elephone UG 04/09 17 Keystrip Labels A vailable on 9 Line LCD telephone and 10 Bu tton LCD Add-on Module T o pr ogram LCD Keystrip Labels 1. Dial #9876 (or press the flexible Prog r am button) 2.
The Basics Ring T ones 18 Strata CIX IP5000-series T ele phone UG 04/09 Dial Pad and Button Beep s IP telephones can emit a “be ep” whenever a dial pad or feature button is pressed. The “beeps” are On by default. Follow these steps to turn the “beeps” On or Off.
The Basics Ring T ones Strata CIX IP5000-series T elephone UG 04/09 19 S peakerphone/Microphone Sensitivity Adjustment When you are using the spe akerphone, high ambie nt no ise lev els may cause the p arty you are talking with to be to cut of f frequen tly .
The Basics T elephone T er minology 20 Strata CIX IP5000-series T ele phone UG 04/09 T elephone T erminology When making or receiving calls on you r IP5000-seri es telephon e yo u may experience one or more of th e following call features depending on how your telephone is configured.
The Basics Making a Call Strata CIX IP5000-series T elephone UG 04/09 21 Making a Call There are three ways to originate a call from the telephone: Handset 1. T o make a call, lift the ha ndset, then dial the number . A line may be automatically selected or choo se a line manually .
The Basics Making a Call 22 Strata CIX IP5000-series T ele phone UG 04/09 Dial Directory This feature is supported on IP5000-series telephones with an LCD displ ay running on CIX R5.2 (or higher) software. Calls can be made by selecting a name from the alphabetical telephone directory.
The Basics Making a Call Strata CIX IP5000-series T elephone UG 04/09 23 BOB L (PRI) BOB LA W VER BRAD FISHER ONE TOU CH ONE TOU CH PICKUP ONE TOUC H CF AC ONE TOUC H NEXT DND Ext. 4227 ONE T OUCH ONE TOUC H BACK CNCL BILL THOMAS BRAD FERR IS BRIAN SMITH Press the key next to the displayed name to call that person.
The Basics Ans weri ng a Call 24 Strata CIX IP5000-series T ele phone UG 04/09 Answering a Call There are several ways to answer a ca ll: Handset When the telephone is programm ed for Ringing Line Preferenc e, pick up the handset and the telephone automati cally answers the ringing line.
Strata CIX IP5000-series T elephone UG 04/09 25 On a Call While on a call you can perform the following: Switching Between Handset and Speakerphone Press Spkr and place the handset on-hook to switch from handset to sp eakerphone mode. T ake the handset off-h ook to switch from speakerphone to hand set mode.
The Basics On a Call 26 Strata CIX IP5000-series T ele phone UG 04/09 Automatic Hold This features enab les you to move from one Line bu tton to another Line button without pressing Hold. Check with your System Administrator to make sure this settin g is turned on.
The Basics Message W aiting Strata CIX IP5000-series T elephone UG 04/09 27 Message W aiting Use your Msg LED/button and LCD to see/retrieve message(s). An extension can receive up to four si multaneous Message W aiting indica tions and LCD messages. One message is reserved for the Message Ce nter .
The Basics Message W aiting 28 Strata CIX IP5000-series T ele phone UG 04/09 T urning On/Off MW LED on Another Extension If you call an extension and it’s busy or there is no answer, yo u may be able to light that extension’s Message Waiting LED and en able that extensio n to call you back.
The Basics Message W aiting Strata CIX IP5000-series T elephone UG 04/09 29 LED Indicator Det ails Each line and Programmable Feature Button has a LED next to it which indicates the status of the line or feature associated w ith the button. Line LEDs light red or green and flash at varying rates to indicate call status (see Ta b l e 6 ).
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 31 Sof tIPT 3 The SoftIPT is a software phon e client that runs on appropriately equipped wired or wireless laptops, tablets and desktop PCs with all versions of Microsoft ® W indows Vi s t a TM and Microsoft ® W indows XP ® operating software (OS).
SoftIPT Message W aiting 32 Strata CIX IP5000-series T ele phone UG 04/09 Sof tIPT Icons The special buttons relating to the SoftIPT screen are described below . T a ble 7 SoftIPT Button Definitions Button Definitions SoftIPT Directory – Clicking this icon enables y ou to access the directory you crea te using MS Outloo k.
SoftIPT Message W aiting Strata CIX IP5000-series T elephone UG 04/09 33 Fixed Buttons The fixed buttons on yo ur telephone enable you to perform standard functions quickly and easily .
SoftIPT Configurin g SoftIPT 3.0 34 Strata CIX IP5000-series T ele phone UG 04/09 Configuring Sof tIPT 3.0 Step 1: Configure the SoftIPT 1. After you have insta lled SoftIPT , double-click the SoftIPT icon on the desktop. The SoftIPT Configuration window o pens.
SoftIPT Configurin g SoftIPT 3.0 Strata CIX IP5000-series T elephone UG 04/09 35 2. In the SoftIPT Configu ration window , enter the following: Fields Description Phone No. This is the SoftIPT extension. Password Password for IP user mobility Node The node ID where the MIPU resi des.
SoftIPT Configurin g SoftIPT 3.0 36 Strata CIX IP5000-series T ele phone UG 04/09 3. Click OK. Automatic startup Check this box to automatically st artup SoftIPT after starting your PC. Note If Automatic startup is un checked and SoftIPT continues to start up, use the MSCONFIG utility screen > S tartup ta b and uncheck T oshiba SoftIPT .
Strata CIX IP5000-series T elephone UG 04/09 37 T o check how many Outlook pr ofiles are on you r PC 1. Go to S tart > Control Panel > Mail 2.
SoftIPT Configurin g SoftIPT 3.0 38 Strata CIX IP5000-series T ele phone UG 04/09 Figure 3 Mail Profiles.
SoftIPT Basic SoftIPT Functions Strata CIX IP5000-series T elephone UG 04/09 39 Basic Sof tIPT Functions S tart the Sof tIPT Double-click the SoftIPT icon on your desktop. Making a Call To make a call 1. Click Speaker then select the on-screen dial pad buttons to dial a call.
SoftIPT Basic SoftIPT Functions 40 Strata CIX IP5000-series T ele phone UG 04/09 Answering a Call To answer a call using the Shift button If the LCD screen is set to view keys 11 ~20 and a cal.
SoftIPT Basic SoftIPT Functions Strata CIX IP5000-series T elephone UG 04/09 41 Using the Directory Y ou can create a directory with MS Outlook (no t Outlook Express). 1. Close SoftIPT if you are using it. 2. Open MS Outlook. 3. Double click on the Contacts icon, click on the New contact icon.
SoftIPT Basic SoftIPT Functions 42 Strata CIX IP5000-series T ele phone UG 04/09 Using Echo Canceller If you have a headset plugged into the microph one/ speaker jack of th e PC, you do not have to always ena ble echo cance ller .
Strata CIX IP5000-series T elephone UG 04/09 43 Feature Operations 4 This chapter gives you more details about your IP5000-series telephone’ s advanced functions. An alphabetical lis t of supported features has b een compiled in this chapter for fast and easy reference.
Feature Operations Account Code Calls 44 Strata CIX IP5000-series T ele phone UG 04/09 Forced Account Codes Some applications require you to enter an Account Code. These Forced Account Codes may be verified or non-verified, depe nding up on the applica tion, but in either case, the caller must enter a code before proceeding.
Feature Operation s Account Code Calls Strata CIX IP5000-series T elephone UG 04/09 45 V olunt ary Account Codes (V erified/Non-V erified) V oluntary Account Codes are optional. They can be entered during a call an d are used for tracking selected calls using Station Message Detail Report (SMDR) call detail recording option.
Feature Operations Advisor y Messages 46 Strata CIX IP5000-series T ele phone UG 04/09 Advisory Messages Advisory messaging enables you to store an informativ e message for LCD telephones that call your telephone. The messages can be up to 16 characters long.
Feature Operation s Alarm Notifi cation Button Strata CIX IP5000-series T elephone UG 04/09 47 Alarm Notification Button The Alarm Notificatio n Button must be setup by your System Ad ministrator on your station. When the Alarm Notifi cation button displays Call your System Administrator.
Feature Operations A utomatic Callback 48 Strata CIX IP5000-series T ele phone UG 04/09 Automatic Callback When you reach a busy station, you can set Automatic Callback to have the system monitor the busy extensi on and no tify you when it becomes idle.
Feature Operation s Background Music Strata CIX IP5000-series T elephone UG 04/09 49 Background Music Y ou can set background music over yo ur tele phone speaker or over external speakers.
Feature Operations Call Forw ard 50 Strata CIX IP5000-series T ele phone UG 04/09 Call Forward There are two types of Call Forwarding that you can set. One is System Call Forward (set in System Programming) which auto matically directs calls to a predefined location, such as V oice Mail.
Feature Operation s Call Fo rward Strata CIX IP5000-series T elephone UG 04/09 51 S t ation Call Forward Categories Y ou can set Call Forward for the followi ng categories of calls. W ithin these categories, you can use five different types of Call Forward Settings (as detailed in the next section).
Feature Operations Call Forw ard 52 Strata CIX IP5000-series T ele phone UG 04/09 S t ation Call Forward Procedures T ab le 22 on Page 179 contains Call Forward Button sequences. Y ou can do a Call Forward function by entering the button sequence as desc ribed or by programming a Programmable Feature Button to perform the sequence.
Feature Operation s Call Fo rward Strata CIX IP5000-series T elephone UG 04/09 53 Call Forward Examples To set your telephone to Call Forward Busy-No Answer to an internal extension number Pre.
Feature Operations Call Histor y 54 Strata CIX IP5000-series T ele phone UG 04/09 Call History Incoming calls with Caller ID or ANI info rmation can be optiona lly recorded into a rolling list for the station where the call is ringing.
Feature Operation s Call P ar k Orbits Strata CIX IP5000-series T elephone UG 04/09 55 Call Park Orbit s The Call Park feature enables you to hold a call temporarily in a location other than your telephone. These areas are called or bits. Y ou or another telephon e user can retrieve a parked call from its orbit by sp ecifying th e orbit number .
Feature Operations Call Pickup 56 Strata CIX IP5000-series T ele phone UG 04/09 T o r etrieve a parked call 1. Press Par k i n O r bi t or press your extens ion button + #32 . 2. Enter the Orbit Number where the call is parked or # for the extension from which you are calling.
Feature Operation s Call Pickup Strata CIX IP5000-series T elephone UG 04/09 57 T o perform Call Pickup Press the buttons shown in the table below for the desired Pickup feature. Notes • The Primary extension number is the di rectory number by wh ich the telep hone set is defined.
Feature Operations Call T ransf er 58 Strata CIX IP5000-series T ele phone UG 04/09 Call T ransfer Call transfer allows a call to be directed from one telephone to another on the CIX. External transfers to telephone numbers or network extensions off the CIX are also supported, please check with your System Administrator to see if this is enabled.
Feature Operation s Call W aiting Strata CIX IP5000-series T elephone UG 04/09 59 T o transfer a call dir ectly to V oice Mail (VM) 1. While on a call, press Cnf/T r n . 2. Enter #407 . 3. Enter the VM mailbox number (usually the same as the extension number) + # .
Feature Operations Caller ID 60 Strata CIX IP5000-series T ele phone UG 04/09 Caller ID Incoming calls to your extens ion with Caller ID can be recorded into a rolling list that is saved on your telephone.
Feature Operation s Conference Calls Strata CIX IP5000-series T elephone UG 04/09 61 T o transfer conference contr ol 1. Complete Steps 1 and 2 above to add th e line to which you wish to transfer conference control. See previous Note. 2. Announce the call and hang up to tran sfer it.
Feature Operations Conference Calls 62 Strata CIX IP5000-series T ele phone UG 04/09 Supervising a T andem Call 1. While talking on an outside call, press Cnf/T r n . Y ou hear di al tone. The extension LED flashes (conference rate). 2. Dial an outside telephon e number .
Feature Operation s Conference Calls Strata CIX IP5000-series T elephone UG 04/09 63 T o add an Incoming call to the Confer ence 1. Place the first caller/Conference on hold. 2. Answer the incoming ringing call. 3. While speaking to the incoming caller , press Cnf/T r n button.
Feature Operations Direct Inward System Acces s (DISA) 64 Strata CIX IP5000-series T ele phone UG 04/09 Direct Inward System Access (DISA) Outside callers with touch tone telephones ca n call in to lines programmed for Direct Inward System Access (DISA) and dial an exten sion or outgoing line without going through an attendant or opera tor .
Feature Operation s Do Not Disturb Strata CIX IP5000-series T elephone UG 04/09 65 Do Not Disturb If your station is in Do Not Disturb (DND) mode, internal, exte rnal and transferred calls do not ring your station and Off-ho ok Call An nounce calls are denied.
Feature Operations Door Lock(s) 66 Strata CIX IP5000-series T ele phone UG 04/09 Setting DND for Another Extension T o activate DND for another extension Enter #6191 (hear Entry T one) + the Primary ex tension of the remote extension + the pass code + # (hear Success T one ).
Feature Operation s Door Phone(s) Strata CIX IP5000-series T elephone UG 04/09 67 Door Phone(s) Door phones can be used to call phones selected in system progra mming. When a door phone calls, you hear a distinctive ringing tone, one or five times (set in system programming).
Feature Operations Echo Cancellation 68 Strata CIX IP5000-series T ele phone UG 04/09 T o call/monitor a door phone 1. W ith the handset off-hook, press an extens ion button. Y ou hear dial tone and the LED flashes green (in-use). 2. Press #15 (hear three tone bursts), then en ter the door phone nu mber (01~24, depending on sy stem size).
Feature Operation s Emergency Ringdown Strata CIX IP5000-series T elephone UG 04/09 69 Emergency Ringdown If a station remains of f-hook for a progra mmable period, it can be automatically treated as an Emergency Call and directed to an emer gency des tination.
Feature Operations Message W aiting 70 Strata CIX IP5000-series T ele phone UG 04/09 Message W aiting Message W aiting is shown on the Msg button which will flash red when there are messages waiting. The waiting message indi cators can come from the voicemail system or they can be internal messages sent from other extensions.
Feature Operation s Message W aiting Strata CIX IP5000-series T elephone UG 04/09 71 T urning On/Off MW LED on Another Extension When an extension is called , the calling par ty can choose to send a message to the called party . This is a notification to say that a call has been missed and the calling party would like to be called back.
Feature Operations Microphone Cut-Off 72 Strata CIX IP5000-series T ele phone UG 04/09 Microphone Cut-Off This feature prevents callers fro m monitoring the soun d s near your telephone whe n your telephone receives a Handsfree Call or cuts-off the telephone microphone while on a speakerphone call.
Feature Operation s Off-hook Call Announce Strata CIX IP5000-series T elephone UG 04/09 73 Off-hook Call Announce Off-hoo k Call Announce (OCA) enabl es you to complete a call to a busy telephone. Y our telephone must be programm ed to eith er announce automatic ally or to anno unce after you press a button on your dial pad.
Feature Operations Override Calls 74 Strata CIX IP5000-series T ele phone UG 04/09 Override Calls The availab le override features are: • Busy Override • Do Not Disturb Override • Executive Over.
Feature Operation s Override Calls Strata CIX IP5000-series T elephone UG 04/09 75 Executive Override Executive Overrid e en ab le s yo u to enter an established conversation. Y our telephone can also be programmed to block Executive Override from other telephones.
Feature Operations P aging 76 Strata CIX IP5000-series T ele phone UG 04/09 Privacy Override This feature enables you to enter an established call on a line you share with another telephone. Up to two statio n users can enter an existing Central Office (CO) line-to- station call (i.
Feature Operation s P aging Strata CIX IP5000-series T elephone UG 04/09 77 All Call Page Y ou can make an All Call Page to telephon es assigned to the “All Call Page Group.” Stations are assigned to the “All Call Page Group” in system programming.
Feature Operations Privacy 78 Strata CIX IP5000-series T ele phone UG 04/09 Privacy Privacy controls the ability of more than one person to use the same extension or CO line at the same time. Privacy applies to mu ltiple appearances of extensions, Phantom extensions, outside Lines and outside Line Group buttons.
Feature Operation s Speed Dial Strata CIX IP5000-series T elephone UG 04/09 79 S peed Dial Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code. Dial sequences can include telephone numb ers, authorization codes, passwords feature activation codes and pauses.
Feature Operations Speed Dial 80 Strata CIX IP5000-series T ele phone UG 04/09 S toring a System/St ation Speed Dial Number 1. Dial #66 . The display shows “SPEED DIAL” and you hear Entry T one. 2. Dial th e Station Sp eed Dial number (100 ~199) or System Sp eed Dial number (200~999).
Feature Operation s Speed Dial Strata CIX IP5000-series T elephone UG 04/09 81 Advanced Sp eed Dial Operation Special Characte rs SD numbers may include 0 ~ 9 , # , * and Pause. For an exampl e on how to use special characters, see page 1 19 . Long SD Numbers Up to 32 digits can be stored in one SD location.
Feature Operations Speed Dial 82 Strata CIX IP5000-series T ele phone UG 04/09 S toring Personal Speed Dial Names Y ou can store names with Personal S peed Di al numbers. These names will display as Soft Keys, that can be used for dialing from the tele phone LCD directories.
Feature Operation s Speed Dial Strata CIX IP5000-series T elephone UG 04/09 83 • T o move one chara cter to the right, press SCROLL or RIGHT Soft Key . T o add a space, press the RIGHT Soft Key twice. • T o backspace (delete previous ch aracter), press the PA G E or LEFT Soft Key .
Feature Operations Time and Date Setting (Local) 84 Strata CIX IP5000-series T ele phone UG 04/09 T ime and Date Setting (Local) IP telephones will display the time, day and date of the time zone of the telephone system location it is connected to.
Feature Operation s T one First / V oice First Signallin g Strata CIX IP5000-series T elephone UG 04/09 85 T one First / V o ice First Signalling T o determine the signalling on the telephone circuit. T one First Signalling When the telephone rings and the called part y must press Spkr or lift the handset in order to receive the call.
Feature Operations T one/Pulse Dialing 86 Strata CIX IP5000-series T ele phone UG 04/09 T one/Pulse Dialing W ith some older Central Offices, you may have to make calls on outside lines programmed for rotary dial pulses.
Feature Operation s Uniform Call Distr ibution Strata CIX IP5000-series T elephone UG 04/09 87 Uniform Call Distribution Uniform Call Distribution (UCD) provides ACD-like service based on the simplified Distributed Hunt feature.
Feature Operations Uniform Call Distr ibution 88 Strata CIX IP5000-series T ele phone UG 04/09 Login/Logout Login and Logout is contro lled by the Login key as sign ed to the agent phon e (see Strata CIX Programming Manual, Volume 1 for details).
Strata CIX IP5000-series T elephone UG 04/09 89 IP5122-SDC 5 The IP5122-SDC telep hon e loo ks and fun ct ions similar to the 10 Button IP telephone when connected to the S trata CIX. This ph one fully supports all the CIX features and services of a regular 10 Button IP telepho ne.
IP5122-SDC Making and Answ er ing Calls 90 Strata CIX IP5000-series T ele phone UG 04/09 Making and Answering Calls Notes • The ACO button (FB10) is the top bu tton on the telephone unless it has been repositioned in programming. • The CIX Extension button is the bottom bu tton on the telepho ne unless it has been repositioned in programming.
IP5122-SDC Local Emergency Ser vice (Cal ling 911) Strata CIX IP5000-series T elephone UG 04/09 91 Local Emergency Service (Calling 91 1) The key benefit of using this telephone is its ability to dial your local Emergency service without going th rough th e CIX system.
IP5122-SDC A CO V olume Control 92 Strata CIX IP5000-series T ele phone UG 04/09 ACO V olume Control T o adjust the hand set/headset volu me Press the Vo l to increase volume and Vo l to decrease volum e during the ACO call.
IP5122-SDC ACO LED and LCD Indication Strata CIX IP5000-series T elephone UG 04/09 93 ACO LED and LCD Indication T able 13 LED and LCD Indications ACO Operatio n ACO LED Indication ACO LCD Display Idle Blank (Off) – if CO is connected. Red – if CO is not connected.
IP5122-SDC A CO Hold 94 Strata CIX IP5000-series T ele phone UG 04/09 ACO Hold Y ou can use th e Hold butto n when u sing th e ACO and CIX service. If yo u have ACO button auto-hold enable d in 3-6-9 program min g, the following interactions occur . The default is “No auto-hold .
IP5122-SDC ACO Operating Summary Strata CIX IP5000-series T elephone UG 04/09 95 ACO Operating Summary The following is a summary of operating ch aracteristics when us ing the ACO service on the IP5122-SDC telephone. • Y our LCD will not display Caller ID name and number when receiving a call on your ACO button .
IP5122-SDC IP5122-SDC Programming 96 Strata CIX IP5000-series T ele phone UG 04/09 IP5122-SDC Programming Important! The IP5122-SDC must be programmed, using eManager, as a 20 bu tton station (Prog. 204). Feature Button 11 (FB11) mu st be programmed as a Release button.
IP5122-SDC IP5122-SDC Programming Strata CIX IP5000-series T elephone UG 04/09 97 4. Press FB04 – Flash timing (100 ms units) (Hook Flash to the CO timing is +/- 10 ms). Press Hold . Go to the next S tep or , if you are finished programming, go to St e p 9 .
IP5122-SDC IP5122-SDC Programming 98 Strata CIX IP5000-series T ele phone UG 04/09 IPT Initialization The IP5122-SDC has a fourth initia lization option (FB4). ACO Default. 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Vo l s then press Hold . 3.
IP5122-SDC Local CO Line Conne ction Strata CIX IP5000-series T elephone UG 04/09 99 Local CO Line Connection A local CO line connection and power are required for ACO operation, including E91 1. IP5122-SDC Connec tions LINE HEAD SET HAND SET LAN PC Connect to CO Line for local CO operati on.
IP5122-SDC Local CO Line Connection 100 Strata CIX IP5000-series T ele phone UG 04/09 Local CO Line Cir cuit Quick T est This procedure is a quick test to verify the CO Line connection and correct IP5122- SDC ACO operation.
Strata CIX IP5000-series T elephone UG 04/09 101 ADM/DSS Console 6 This chapter provides an overview of the op tional units that can be connected to the IP5000-series telephones. Add-on Modules The following Add-on modules provide additional buttons: • 10 Button LCD Modul e (LM51 10), up to two supported p er telephone .
ADM/DSS Console ADM 102 Strata CIX IP5000-series T ele phone UG 04/09 ADM Buttons and LEDs The 10 button LCD add on module and the 20 b utton keystrip add on modu les h ave programmable feat ure buttons that can be assig ned as CO Line, Directory Number , DSS, One T ouch Speed Dial or any other programmable featur e (shown right).
ADM/DSS Console ADM Strata CIX IP5000-series T elephone UG 04/09 103 Adding an ADM For installation instructions, please refer to the S trata CI X Installation & Maintenance. Please read the caution, if you a re connectin g the ADM with the telephone or moving the telephone with the ADM.
ADM/DSS Console DSS Console 104 Strata CIX IP5000-series T ele phone UG 04/09 DSS Console The 60 button Direction S tation Selection (DSS) Console operates alongside a digital telephone to provide 60 (up to 180) add itional buttons (shown right).
ADM/DSS Console DSS Console Strata CIX IP5000-series T elephone UG 04/09 105 T ransferring to an Idle St ation Y ou can transf er internal or outside calls to an idle station from either a DSS console or a ADM. T o transfer a call to an idle station 1.
ADM/DSS Console DSS Console 106 Strata CIX IP5000-series T ele phone UG 04/09 Call T ransfer with Camp-on Y ou can transfer a call to a busy station from either a DSS console or an ADM. Use the DSS to transfer the call, even though the DSS LED associated with the station you are “transferring to” is red.
ADM/DSS Console DSS Console Strata CIX IP5000-series T elephone UG 04/09 107 Paging Y ou can make an announcement page to a group of telephone sp eakers selected in system programming with All Call P age on the DSS console. SD (if programmed) on either the DSS console or the ADM ca n b e used for page announcements.
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 109 Headset and Handset Operation 7 The IP5000-series telephones come stan dard with a built-in headset interface. Recommended Headset s For an extensive list of recommended and supported headsets please visit T oshiba's website at www .
Headset and Handset Opera tion A UTO or CARBON Setting 110 Strata CIX IP5000-series T ele phone UG 04/09 AUT O or CARBON Setting There exist two types of headsets: ECM and Carbon.
Headset and Handset Ope ration Headset T ransmit Le vel Adjustments Strata CIX IP5000-series T elephone UG 04/09 111 Headset T ransmit Level Adjustment s T o set the level of the Headset T ran smitter for IP5000-series telephones 1. Press 3 + 6 + 9 + Hold (simultaneously).
Headset and Handset Opera tion Handset Lev el Adjustments 112 Strata CIX IP5000-series T ele phone UG 04/09 Handset Level Adjustment s Change the Carbon setting if a Carbon type handset or he adset is connected to the handset jack. T o change the Carbon Setting 1.
Headset and Handset Ope ration Handset Lev el Adjustments Strata CIX IP5000-series T elephone UG 04/09 113 T o adjust the Handset or He adset Receiver L evel for IP5000-series te lephones 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Redial .
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 115 User Programming 8 User programming allo ws yo u to customiz e yo ur LCD telephone. Y ou will be able to: • Enter numbers in your personal Speed Dial.
User Pr ogramming Programming F eature Buttons 116 Strata CIX IP5000-series T ele phone UG 04/09 Programming Feature Buttons Y ou can use the User Programming Mode (describe d below) for customizi ng yo ur IP5000-series display tele ph one without the aid of an Administrator or Service T echnic i an.
User Pr ogramming Programmable F ea ture Button Codes Strata CIX IP5000-series T elephone UG 04/09 117 Setting/Changing a Programmable Feature Button’ s Function 1. Press #9876 to enter User Programming Mode. 2. Press Hold . 3. Press the Programmable Feature Button to set or change.
User Pr ogramming One T ouch Buttons 118 Strata CIX IP5000-series T ele phone UG 04/09 One T ouch Buttons One T ouch buttons can be used for storing fre quently used features or dialed numbers, such as Speed Dial numbers (use Speed Dial Codes to s tor e additional numbers).
User Pr ogramming One T ouch Buttons Strata CIX IP5000-series T elephone UG 04/09 119 Example of Spe cial Character Usage T o create a One T ouch for Park and Page und er one button, program the following sequence unde r the One T ouch button. CNF #33***HOLD FB1 #30 CNF – puts the caller on hold an d gets new dial tone.
User Pr ogramming F eature Codes 120 Strata CIX IP5000-series T ele phone UG 04/09 Feature Codes Feature Access Codes are entered as a sequence on your telephone to use a particular feature. For an example of Call Forward, see “Call Forward Examples” on page 53 .
User Pr ogramming F eature Co des Strata CIX IP5000-series T elephone UG 04/09 121 Remote Pic kup (pickup anothe r ext e n s i on ) Ext. button + #5#72 + Primar y Ext. No. Pic kup an Outside Line on Hold Ext. button + #5#73 + Outside Line on hol d (001~128) Pick up a an on Hold Ext.
User Pr ogramming F eature Codes 122 Strata CIX IP5000-series T ele phone UG 04/09 Advisory Message - Activation Ext. or Phantom Ext. button + #411 + Message No . (see table in “Advisory Me ssages” on page 46 ). Hang up . Advisory Message - Cancellation Ex t.
User Pr ogramming F eature Co des Strata CIX IP5000-series T elephone UG 04/09 123 Speed Dial (Sto ring an S D number) Station 2 #66 + nnn + Phone No .
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 125 Administrator Programming 9 Initializing the IP T elephone CA UTION! If you initialize the IP telephone , all settings r eturn to default. 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Vo l s . 3.
Administrator Programming IP Setup Instructions 126 Strata CIX IP5000-series T ele phone UG 04/09 IP Setup Instructions The following steps must be completed befo re starting the telephone setup. The IP password will be assigned by the T elephone Administrator and is the verification step of the telephone registration with the CIX (xIPU).
Administrator Progr amming IP Setup Instructions Strata CIX IP5000-series T elephone UG 04/09 127 8. Press FB6 to enter the CIX S trata Net node number of t he CIX node that contains the xIPU to which this I PT interfaces, then press Hold . This FB setting is for CIX networked systems only .
Administrator Programming Initial Star t-up 128 Strata CIX IP5000-series T ele phone UG 04/09 Initial S t art-up When an IP5000-series telephone is connected to power it will in itialize then attempt to connect to the Strata CIX system. The start-up seque nce indicators are described below .
Administrator Progr amming IP T elephone Function Settings Strata CIX IP5000-series T elephone UG 04/09 129 IP T elephone Function Settings These steps enable you to turn On/Off bu tton beeps, room noise cancellati on, hand set Busy Override, and headset volume control.
Administrator Programming Setting the IP T elephone Headset T ransmit V olume 130 Strata CIX IP5000-series T ele phone UG 04/09 Setting the IP T elephone Headset T ransmit Vo l u m e 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press # . 3. Press Hold 4.
Administrator Progr amming Reset F actor y Default Settings Strata CIX IP5000-series T elephone UG 04/09 131 Reset Factory Default Settings T o r eset the LCD settings to Factory defaults 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press V olume 3.
Administrator Programming Reset F actor y Default Settings 132 Strata CIX IP5000-series T ele phone UG 04/09 LCD Backlight Setting 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press MIC 3. Press Hold , display shows LCD backlight setting. 4. Press FB01 to change Backlight mode.
Administrator Progr amming Reset F actor y Default Settings Strata CIX IP5000-series T elephone UG 04/09 133 Handset / Headset Side T one V olume Setting 1. Press 3 + 6 + 9 + Hold (simultaneously). 2. Press Redial button. 3. Press Hold to access Sound Level Setting Mode.
Administrator Programming IP5131-SDL Settings 134 Strata CIX IP5000-series T ele phone UG 04/09 IP5131-SDL Settings This section contains instructions to configure the IP5131-SDL telephone. All instructions found in this section pertain to the items found in th e IP Configurations screen of the IP5131-SDL telephon e.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 135 Advance P age 1:Displa ys or sets the Primary Name Server , the Secondar y Name Se r ver , GRQ P or t, R.
Administrator Programming IP5131-SDL Settings 136 Strata CIX IP5000-series T ele phone UG 04/09 T a ble 20 IP5131- SDL Default Settings Major items Minor items Initial value Network Diagnosis 1 Ping address 0.0.0.0 Network Setti n g (Basic) 1 DHCP server mode <ON/OFF> ON 2 IP address 127.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 137 Sound Setting 1 Key beep <ON/OFF> ON 2 Room noise <ON/OFF> OFF 3 Handset BOV <ON/ OF F>.
Administrator Programming IP5131-SDL Settings 138 Strata CIX IP5000-series T ele phone UG 04/09 Network Settings T o access the Network Setting screens 1. Press Hold + 3 + 6 + 9 (simultaneously), choo se the Network soft key . 2. From the IP Configurations screen, th ere are three screens for Network Settings (shown below).
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 139 DHCP Server Settings 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. From the IP Configurations screen, choose Network > DHCP . The DHCP Mode screen displays.
Administrator Programming IP5131-SDL Settings 140 Strata CIX IP5000-series T ele phone UG 04/09 IP Address 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. From the IP Configurations screen, choose Network > IP Addr . The IP Address screen displays (shown right).
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 141 Subnet Mask 1. From the IP Configurations screen, choose Network > Subnet. The Subnet Mask screen displays (show n right). The current subnet di splays on the one-line text field.
Administrator Programming IP5131-SDL Settings 142 Strata CIX IP5000-series T ele phone UG 04/09 St ation ID From the IP Configurations screen, choose Network > Stat ion. The Station ID screen displays (shown right). The current S tation ID displays.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 143 CIX System /IPU Address Mode 1. From the IP Configurations screen, choose Network > > IPU Mode. 2. Press the Manual or Broadcas t soft key to change the set value.
Administrator Programming IP5131-SDL Settings 144 Strata CIX IP5000-series T ele phone UG 04/09 Port Setting 1. From the IP Configu rations screen, choose Network > > Port Setting. The Port Setting screen displays. 2. Press the Dynamic or Static softkey to change the set value.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 145 Advanced Network Settings T o access the Advanced Network Setting screens 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. Press Advanced softkey , the Ad vanced Setting screen appe ars.
Administrator Programming IP5131-SDL Settings 146 Strata CIX IP5000-series T ele phone UG 04/09 IP Address for Primary DNS (Domain Name Se rver) Note If DHCP Mode is ON, you don’ t have to set any p arameters for the DNS server . 1. From IP Configurations > Advanced > P-D NS.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 147 GRQ Port Number 1. From IP Configurations > Advanced > GRQ Port. The current GRQ Port Number displays (shown right). 2. Enter the New number . (Maximum 5 digits).
Administrator Programming IP5131-SDL Settings 148 Strata CIX IP5000-series T ele phone UG 04/09 T able 21 Dial P ad Alphanumeric Characters Dial Pad Buttons Number of times to press the dial pad butto.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 149 External Administration T erminal IP Address Upper Bound Setting This screen can be used to set an External Administration T erminal IP Address Upper Bound.
Administrator Programming IP5131-SDL Settings 150 Strata CIX IP5000-series T ele phone UG 04/09 External Administration T erminal IP Address Lower Bound Setting This screen can be used to set an Extern al Administration T erminal IP Address Lower Bound.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 151 External Administration User ID Setting Use this screen to set an User ID. External accessing is enabled when the user can successfully log in with correct User ID and Password 1.
Administrator Programming IP5131-SDL Settings 152 Strata CIX IP5000-series T ele phone UG 04/09 Dynamic Port Base 1. From IP Configurations > Advanced > > Dynamic Port Base. The Dynamic Port Base screen displays (shown right). 2. Enter the new port number (maximum 5 characters) .
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 153 PC Port T ype 1. From IP Configurations > Advanced > > > PC Port T ype. The PC Port T ype screen displays (shown right). 2. Press the Access or T runk softkey to set the value.
Administrator Programming IP5131-SDL Settings 154 Strata CIX IP5000-series T ele phone UG 04/09 Sound Settings T o access the Sound Setting scr eens From the IP Configurations menu, choose the Sound soft key . Note There are three screens for Sound Settings (s hown below).
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 155 Keybeep, Room Noise, Handset BOV , Carbon Handset, and Carbon Headset Important! The following st eps apply to all of the above items. 1. From the IP Configurations screen, select Sound > Keybeep (or any of the above items).
Administrator Programming IP5131-SDL Settings 156 Strata CIX IP5000-series T ele phone UG 04/09 Headset Tx V olume Setting Screen From the IP Configurations screen, select So und > > Headset Tx V ol. The Headset Tx V olume screen displays. T o Change Information on this screen 1.
Strata CIX IP5000-series T elephone UG 04/09 157 Headset Tx and Rx V olume 1. From the IP Configurations screen, select Sound > > Handset Tx/Rx V olume. The appropriate screen will display . 2. Enter the new volume level. 3. Press the Set soft key to accept the change.
Administrator Programming IP5131-SDL Settings 158 Strata CIX IP5000-series T ele phone UG 04/09 Key Repeat From the IP Configurations menu, select Key Repeat.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 159 Repeat Delay T imer and Repeat Rate Timer Important! The following st eps apply to the above two items. From the IP Configurations menu, select Key Repeat > Repeat Delay T imer or Repeat Rate Timer .
Administrator Programming IP5131-SDL Settings 160 Strata CIX IP5000-series T ele phone UG 04/09 Other Setting From the IP Configurations menu, select Others. The Others screen displays. This screen contains Language, Input timer Mode, Input T imer V alue settings, Backlight settings.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 161 Input Time r Mode Se tting Screen 1. From the IP Configur ations menu, se lect Others > Input T imer Mode. The Input T imer Mode Setting screen displays.
Administrator Programming IP5131-SDL Settings 162 Strata CIX IP5000-series T ele phone UG 04/09 Backlight Mode Screen 1. From the IP Configurations menu, select Others > BL Mode. The Backlight Mode screen displays. 2. Choose Always Off, Always On or On-Demand softkey to setup when yo u would like to use the backlight.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 163 Loop Back T est 1. Press Hold + 3 + 6 + 9 (simultaneously). 2. From the IP Configurations screen, select Net Diag > Loop Back T est. Notes • Press Exit to move back a screen.
Administrator Programming IP5131-SDL Settings 164 Strata CIX IP5000-series T ele phone UG 04/09 5. Select the Cancel so ft key to cancel the intended setting change and to move to the Loop Back T e st Screen without rewriting the NV -RAM data. Ping St art and Stop From the Loop Back T est screen, pre ss the Ping Start soft key .
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 165 Factory From the IP Configurations menu select Factory .
Administrator Programming IP5131-SDL Settings 166 Strata CIX IP5000-series T ele phone UG 04/09 Display/Key T est 1. From the IP Configurations menu select Factory > Display/Key T e st. The Displa y/Key T est Mode screen displays. 2. Press the soft key next SK01~SK14.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 167 Display Mode 1. From the IP Configurations menu select Factory > Display Mode. The Display Mode screen displays. 2. Press the IP5131 or T est soft keys to change the set value.
Administrator Programming IP5131-SDL Settings 168 Strata CIX IP5000-series T ele phone UG 04/09 Initialize Select Configuration > Initialize. The Initialize screen displays.
Administrator Progr amming IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 169 Reset 1. From the IP Configurations menu select Reset. The Reset screen displays. This screen will also display when you press the Set soft key after a setting change is made in the Network, Adva nced and Initialize screens.
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 171 Info Manager TM 10 These applications can be used with the IP5131-SDL telephone or a PC with a web browser. Info Manager Administrat ion details can be found in the St r a t a C I X Pr ogramming Manual, V olume 3 – Application and Implementa tion.
Info Mana gerTM IP5131-SDL Settings 172 Strata CIX IP5000-series T ele phone UG 04/09 Note The application options screen displays (shown right). Press the soft keys to select an application. Y ou also ha ve an option to cycle through all the applications (Cycle), an option to configure the application, or an option to logout.
Inf o ManagerTM IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 173 W eather 1. From the Options screen, press the W eather soft key to check the weather of a location. The W eather screen showing the cities displays (shown right). 2.
Info Mana gerTM IP5131-SDL Settings 174 Strata CIX IP5000-series T ele phone UG 04/09 News 1. From the Options screen, press the News soft key to view company news headlines. 2. T o view details pertaining to an item, press the soft key next to the news item.
Inf o ManagerTM IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 175 Calendar Y ou can select Calen dar to view your calendar on a Microsoft Exchange Server . 1. From the Options screen, select Calendar . The calendar screen displays (shown righ t).
Info Mana gerTM IP5131-SDL Settings 176 Strata CIX IP5000-series T ele phone UG 04/09 For details on an item, select the corresp onding softkey next to the date on the meeting screen. The Meeting details display (shown below right). For the T elephone to notify you of a Meeting 1.
Inf o ManagerTM IP5131-SDL Settings Strata CIX IP5000-series T elephone UG 04/09 177 Cycle Select Cycle to cycle through the web applications. ...or 1. From the Options screen, press the Configure soft key . 2. Press Properties soft key . 3. Press the Auto soft key .
This page is intentionally left blank..
Strata CIX IP5000-series T elephone UG 04/09 179 Refe rences A This Appendix contains table that su pport some of the feature operations. Call Forward T able 22 Call Forwa rd Pr ocedure Feature Button Sequence Call Forwa rd Any Call - Internal and I ncoming L ine Calls: F orwards any call, whether an interna l call or incoming line call.
References Call Forw ard 180 Strata CIX IP5000-series T ele phone UG 04/09 Call Forward - Incoming Line Calls: F orward incoming line calls only . All Calls to an e xt. Press e xt. button + #60 13 (tone) + dial the dest. ext. no . (tone) All Calls to outside telephone no.
Strata CIX IP5000-series T elephone UG 04/09 181 No Answer to an e xt. Press e xt. button + #6032 (tone) + dial the oth er telephone’ s ext. no. + enter other telephone’s Call F orward pass code (to ne) + # + dest. telephone no. (tone) + timer ( 08 ~ 60 ) (tone) No Answer to outside telephone no.
References Call Forw ard 182 Strata CIX IP5000-series T ele phone UG 04/09 No Answer to outside telephone no. Press e xt. button + #6034 (tone) + dial the oth er telephone’ s ext. no. + enter other telephone’s Call F orward pass code + # (tone) + outside line access code + dest.
References Soft K eys Strata CIX IP5000-series T elephone UG 04/09 183 Sof t Keys The table below is a list of soft key labels tha t appear on the LCD telephones. Press the soft key button associated with the label to activate the feature ( SK1 , SK2 , SK3 and SK4) .
References Button Label s 184 Strata CIX IP5000-series T ele phone UG 04/09 Button Labels The button labels in Ta b l e 2 4 are for the Programmable Buttons on the tel ephone.
Strata CIX IP5000-series T elephone UG 04/09 185 DSS Direct S tation Selection(s) – Press to ring a preselected station. The LED associated with each DSS button provides the status (idle/busy) of the station assigned to the button.
References Button Label s 186 Strata CIX IP5000-series T ele phone UG 04/09 Release and Ans Release and Answ er — Press to disconnect or comple te the transf er the current outside or e xtension call and automatica lly answ er t he new incoming outside or e xtensi on call.
References Button Labels Strata CIX IP5000-series T elephone UG 04/09 187 120 CO L i n e x x x Line XXX(Caller ID) Ye s 130 CO Line Group L i n e G r p x x x Line Grp XXX(Caller ID) Ye s 140 Pooled Li.
References Button Label s 188 Strata CIX IP5000-series T ele phone UG 04/09 900 Application St a r t - Application #93 A C D H e l p ACD H elp Ye s 900 Application St a r t - Application #94 A C D P i.
Strata CIX IP5000-series T elephone UG 04/09 189 Har dware Connections B IP5000-Series T elephone T ilt Angles The IP5000-series telephones ha ve three tilt positi ons built in to the base. There is also a tilt stand extension that adds an additional 20 degrees of tilt.
Har dware Connections IP5000-Series T elephone Tilt Angles 190 Strata CIX IP5000-series T ele phone UG 04/09 IP5000-Series Desk-top Tilt Angle With T ilt-St and Extension IP5000-Series Wall Mount Angl.
Har dware Connection s Connector Icons Strata CIX IP5000-series T elephone UG 04/09 191 Connector Icons The connecto rs on the IP50 00-series telephones are id entified wit h icons.
Har dware Connections Wiring 192 Strata CIX IP5000-series T ele phone UG 04/09 Wir i n g IP5000-series T eleph one Connectors LAN Cable LAN Connection from internal switch (optional) Handset Local Power Headset ACO Line (SDC S tatio n only) The IP5000-series telephones incl ude the special long-tail handset cords required to fit the tilt bases.
Strata CIX IP5000-series T elephone UG 04/09 193 Centre x Application C Y our syst em may be equipped with the Centrex Applicatio n, which enhances its feature capability when installed behind a Centrex or PBX syst em.
Centrex Application Delay ed Ringing 194 Strata CIX IP5000-series T ele phone UG 04/09 Delayed Ringing Outside line or Centrex lin e(s) can be programm ed fo r a 12-second and/o r 24 -second ring delay at stations to permit alternate answering cond itions.
Strata CIX IP5000-series T elephone UG 04/09 195 Inde x A abandoned call numbers (see Call History), 54 about this book conventions, x how to use this guide, x organization, ix related documents, xii .
Index D ~ F 196 Strata CIX IP5000-series T e lephone UG 04/09 any call, 51 override, 107 station, 50 system, 50 call history, 54 call hold, 25 calling, 21 calling from SoftIPT, 39 , 40 call park, 120 .
Inde x G ~ O Strata CIX IP5000-series T elephone UG 04/09 197 verified), 43 G group pick up, 56 H handset calling, 21 handsfree answerba ck, 24 Hold, 7 hold, 25 line hold, 55 , 58 hot dialing, 20 , 21.
Index P ~ V 198 Strata CIX IP5000-series T e lephone UG 04/09 P paging, 56 , 107 access codes, 117 , 122 park, 120 park in orbit, 55 park in orbit, 55 pickup, 56 pick up group calls, 56 privacy, 78 ov.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba IP5000-UG-VB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba IP5000-UG-VB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba IP5000-UG-VB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba IP5000-UG-VB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba IP5000-UG-VB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba IP5000-UG-VB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba IP5000-UG-VB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba IP5000-UG-VB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba IP5000-UG-VB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
