Benutzeranleitung / Produktwartung DVS16-480-X des Produzenten Toshiba
Zur Seite of 140
1 Digital Video Recorder XVS - DVS - HVS User Manual model no. Please carefully read these instructions before using this product. Save this manual for future use.
ii.
iii Surveillix™ XVS/DVS/HVS User Manual Manual Edition 2 9100AD – MAY 200 9 Printed in USA No part of this documentation may be reproduc ed i n any means, electronic or mechanical, for any purpose, except as expr essed in the Software License Agreement.
iv.
v LIMITED WARRANTY DIGITAL VIDEO RECORDER The Imaging S ystems Division of Toshiba America Information Systems, Inc. (“ISD”) makes th e following limited w arranties.
vi IMPORTANT SAFEGUARDS 1. Read Owner’s Manual – A fter unpacking this product, read the owner’s manual carefully, and follow all the operating an d other instruction 2. Power Sources – This product should be operated only from the type of p ower source indicated on the label.
vii IMPORTANT SAFEGUARDS, continued 16. Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply co rd or plug is damaged. b. If liquid has been spilled, o r objects have fallen into the unit.
viii NOTES ON CLEANING Use a soft dry clot h for cleaning. For stubborn dirt, soak the cloth in a weak detergent s olution, wring wel l and wipe. Use a dry cloth to wipe it dry. Do not us e any type of solvent, such as thinner and benze ne, as they may damage the surfac e of the DVR.
ix WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION CAUTI ON: TO R EDUCE THE RIS K OF ELEC TRIC SHOCK, DO NOT RE MOVE C OVER (OR BAC K).
x RACK MOUNT INSTRUCTIONS Elevated Operating Ambient – If ins talled in a clos ed or multi-uni t rack assembly , the operating a mbient temperat ure of the rac k environment may be greater t han room ambient.
xi CE NOTICE This product is in conformity with the followi ng European Directives: ELECTROMAGNETIC COMPATIBILITY DIRECTIVE , 89/336/EEC (as amended by 92/31/EECand by Article 5 of 93/68/EEC) per the .
xii.
xiii Table of Contents PREFACE ....................................................................................................................... ............................................... 1 ABOUT THIS GUIDE .............................
xiv Connecting a PTZ Came ra ....................................................................................................... .......................... 24 Attaching the 3-Pi n PTZ A dapter ..................................................
xv Create a Moti on Area .......................................................................................................... ............................... 45 Activating an Alarm on a Motion Event ..........................................
xvi Add a New User ................................................................................................................ ............................. 67 User Rank ........................................................................
xvii PAN / TILT / ZOOM OVERVI EW .................................................................................................... ........................ 88 SETTING UP A PTZ CAMERA .............................................................
xviii Installing Remote Software .................................................................................................... ...................... 113 Create a New Remote Connection .......................................................
xix.
.
1 PREFACE ABOUT THIS GUIDE This manual is a setup and mainte nance guide th at can be used f or reference when setti ng up the DVR and for troubleshooting whe n a problem occurs. Only authorized p ersonnel shou ld attempt to re pair this unit. Toshiba reserves t he right to make c hanges to the DV Rs represented by this manual w ithout notice.
2.
3 INTRODUCTION PRODUCT DESCRIPTION A Surveillix XVS / DVS / HVS is a DVR, a server that performs as a High Definition Digital Recorder. By utilizing the many feat ures of a computer, incl uding processing power, storage cap acity, graphics compression, an d security features , the DVR is more pow erful than the analog r ecorders of the past.
4 FEATURES Toshiba’s Surveilli x DVRs include the fo llowing new features : • Optimized and De signed for Micros oft® Windows XP E mbedded® • Up to 32 Camera Inputs • Supports up to 16 Relay.
5 CONTROLS AND CONNECTIONS This chapter inclu des the following information: • Input / Output Connector Locati ons • Front Panel Controls an d LEDs • Rear Panel Connec tors.
6 FRONT PANEL CONTROLS The front panel of the DVR contains the devices that wi ll be commonly us ed for data removal, re trieval, and b ackup replacemen t .
7 DVS / HVS LOCK OPEN LOCK OPEN LOCK OPEN LOCK OPEN Cooling Fan Air Intake DVD±RW Drive Hard Drive Array Hard Drive Activity & Power LEDs On / Off Power Switc h USB Ports.
8 REAR PANEL CONNECTORS The rear panel of t he DVR contains the c onnectors used to attach cameras, sensors, and relay s to the DVR. Below are d iagrams t hat outline the loc ation and descriptio n of.
9 4 Channel DVI-D 1394 BNC Connectors for Video Input Cooling Fan Audio/Spot Monitor Output AC Power Connector RJ-45 Network Jack Fire Wire Audio • Line In – line level • Speaker Out • Microph.
10 DVS/HVS 8/16 Channel CH 1 in CH 2 in CH 3 in CH 4 in CH 5 in CH 6 in CH 7 in CH 8 in CH 9 in CH 10 i n CH 11 in CH 12 in CH 13 in CH 14 in CH 15 in CH 16 in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 C.
11 32 Channel CH 1 in CH 2 in CH 3 i n CH 4 in CH 5 in CH 6 in CH 7 in CH 8 i n CH 9 in CH 10 in CH 11 in CH 12 i n CH 13 i n CH 14 i n CH 15 in CH 16 in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONTROL.
12 PCI Card Configurations 120 PCI Configuration 240V PPS PCI Configuration 240 PPS 8/16 Channel PCI Configuration RCA Video Out Audio Inputs RS-485 Interface RCA Video Ou t A udio In p uts RS-485 Int.
13 240 PPS 32 Channel PCI Configuration 480 PPS 16 Channel PCI Configuration 480 PPS 32 Channel PCI Configuration RCA Video Out S-Video Out SVGA Monitor Outpu t Audio Input Cable Adapter RS-485 Interf.
14 NOTES:.
15 GETTING STARTED This chapter inclu des the following information: • Included Compon ents • Setting up the DVR Hardware • Optional Compon ents.
16 IDENTIFYING INCLUDED COMPONENTS Surveillix™ DVRs come with a mouse, k eyboard and s elected software and cables. Ident ify the followin g components to make sure everything has be en properly incl uded with the new D VR. If any of the following items are missing, co ntact the dealer to arrang e a replacement.
17 OPTIONAL COMPONENTS To fully utilize the DVR’s potential; s everal option al Surveillix c omponents are liste d below. Contact the dealer for more in formation. 1 Extra Video Storage Hard Drive Each DVR has a virtually unlimited st orage potential.
18 KEYBOARD SETUP To attach the key board to the DVR, p lug the end of th e Keyboard in to the keyboard PS/ 2 Port located on the back of the machine . The keyboard PS/2 Po rt can be identified by the purple color. Refer to the Rea r Panel Connector s diagram for mor e information.
19 MONITOR SETUP The DVR has the follow ing connectio ns available to att ach a monitor. SVGA Output To VGA Monitor. DVI-D Output To TV / Digital Monitor Attach the monitor or monitors to the rear of the DVR using th e cable supplie d by the monit or manufacturer.
20 MAKING CONNECTIONS ON AN XVS Connecting a Video Source There are different types of Video So urces that can be plu gged into the X VS including DVD play ers, VHS players, and CCTV Cameras. The back of th e XVS contains up to 16 vi deo inputs depen ding on the model.
21 Connecting Sensors to the XVS Each XVS may have up to 16 Sensor inputs. These inputs can be used wi th devices such as infrar ed devices, motion device, glass breakage alarms , door and window t rips, and many m ore. The Sensors can be set to Nor mally Open or Norm ally Closed inside the software.
22 Connecting Control Outputs to the XVS Each XVS may have up to 4 Control Outputs. These outputs can be used to trigger devices such as Sirens, Phone Dia lers, Lights, and any other rel ay activated device. There is no power supplied to the ports. Us e an external power s upply if nec essary.
23 Looping Outputs The 16 Channel X VS may have up t o 16 Looping ou tputs. Depending on the destinat ion of the out puts, each outp ut may have t o be terminated. The o utputs are located on the BNC Connector Cab le. Attach the cabl e to the input for the BNC Connector Cable highlighted below.
24 Connecting a PTZ Camera Setting up a PTZ Camera is simple. The DVR c omes preassembl ed with an inter nal PTZ adapter. Th e cabling may be run up to 4,000 ft using 22 Gauge Twis ted Pair. It is important to understand how t he PTZ connects to t he DVR.
25 MAKING CONNECTIONS ON DVS / HVS Connecting a Video Source There are different types of Video Sourc es that can be plu gged into the DVR includ ing DVD players, VHS play ers, and CCTV Cameras. The bac k of the DVR contains up to 32 video in puts depending on the DVR model.
26 Connecting Sensors to the DVS / HVS Each DVR has up to 16 Se nsor inputs. Thes e inputs can be us ed with devic es such as infrared d evices, motion dev ice, glass breakage alarms , door and window t rips, and many m ore. The Sensors can be set to Nor mally Open or Norm ally Closed inside the software.
27 Looping Outputs The 8/16 Channel DVS / HVS has up to 16 loo ping outputs. Dep ending on the des tination of the looping output s, each one may hav e to be terminat ed.
28 Looping Output Termination When it is neces sary to terminat e a looping outpu t, the DVR has bui lt in termination t hat allows users to select indiv idual ou tputs. It is not always necess ary to terminat e the output; it d epends on the dev ice to which you are connecting.
29 HARD DRIVE ARRAY (D VS / HVS ONLY) Swapping a Hard Drive 1. Press the Hard Drive Power Butto n to turn off power t o the hard drive being removed. 2. Turn the Butt on Lock to the open position a nd push the Handle Release Butto n 3. Pull the Rele ase Handle outward while remov ing the hard drive.
30 TURNING ON THE DVR Once the cables a nd adapters hav e been proper ly connected it is time to turn on the power . To turn on the po wer follow these s teps: 1. Turn on the monitor and any ex ternal peripherals (ex. Printers, Exter nal Storage Devices , etc.
31 DVR BASICS This chapter inclu des the following information: • Turning the DVR on an d off • Becoming famili ar with the Display s creen • Defining Screen Div isions.
32 SETTING THE TIME AND DATE 1. Exit to Windows by clicking the Exit button fr om the Display s creen and selec ting Restart in Windows Mode. (See the Dis play screen section later in this chapter) 2. Open Windows Ex plorer. Do this by r ight-clicking th e My Computer Icon (l ocated on the to p left hand corner of the Desktop) and select Explore.
33 Importing DVR Settings 1. Exit to Windows by clicking the Exit button on the Display s creen and sel ecting Restart in Windows Mode. (S ee the Display screen section later in this chapter) 2. Click Start > Programs > Surveillix > VFormat. 3.
34 DISPLAY SCREEN Each time the DVR s tarts, the program defaults to the Display screen. The fo llowing diagram ou tlines the butt ons and features used on the Display s creen. You shou ld become fam iliar with these o ptions as this is the screen that will be dis played the maj ority of the time.
35 CAMERA VIEW Recording Status Indicator The camera s tatus for each cam era is displayed in the upper rig ht corner on the V ideo Display Area. T he following are the diff er ent states for each c amera: Recording Displayed when the c amera is currently being recorded to the DVR.
36 SCREEN DIVISION BUTTONS The Screen Divisi on menu allows yo u to view cameras in groups such as two by two, three by three and four by four. The button options are shown below. 1st Four Cameras View – Displays cameras 1-4 in the Vide o Display Area.
37 SETUP OPTIONS This chapter inclu des the following information: • Setup Overview • Camera Setup • Motion • Frame Setup • Schedule • Sensor • Network • Information • Administrative.
38 SETUP OVERVIEW The Setup options allow you to optim ize your DVR by adjusti ng things like camera names, reboot schedules , recording sched ules and more.
39 CAMERA SETUP Set Up New Camera 1. Attach camera to the rear o f the DVR chassis. 2. Click Setup on the Display sc reen. 3. Click Camera Setup to open the Camera Setu p display. 4. Select the ch annel that corres ponds with the new camera from the Se lect Camera list.
40 NETWORK VIDEO Supported IP Camera Manufactur ers ACTi Arecont Vision Axis Brans D-Link IQeye Lumenera Mobotix Panasonic Pixord Samsung Securgen Sony Stardot Toshiba VivoTek Connecting a Network Device Connecting Manually 1. From the Display screen, clic k Setup .
41 Connecting with Camera Finder 1. From the Display screen, clic k Setup . 2. Click the Network Video tab. 3. Click the Add/Remove Device tab. 4. Click Find Cameras to automatic ally find all conn ected Network camera s. 5. Select the ch eck box next to the desired cam era.
42 Camera Configuration The Camer a Configuration tab displays information on all ca meras (analog an d network) connecte d to the Surveillix DVR Displaying More Columns The Camer a Configuration tab can be cus tomized to di splay the informati on you use mos t.
43 HVR Upgrade and Registration Have the following information ava ilable before regis tering the HVR u pgrade. HVR Software Serial Number: T hat product Seria l Number is the uni que number that T oshiba provided with the purchase s oftware. System ID: The System ID is a number that is ge nerated by the S urveillix unit.
44 5. Verify the informat ion. 6. Click Next if the informatio n provided is correct. 7. Once validate d, the user will be pr ovided with the Unlock Code. 8. Print the page and save for later r eference. Unlocking the Upgrade 1. Return to Setup > Network Cameras > License .
45 MOTION SETUP The DVR allows the user t o adjust several differ ent Motion Se ttings and cr eate motion detect ion areas. Create a Motion Area 1. Click Motion in Setup . 2. Select a camera fr om the Select Camera list. 3. Select the Det ect Detail Motion Area check box .
46 Activating an Alarm on a Motion Event 1. In the Motion Setup wind ow, select a camer a to edit from t he Camera list. 2. Create a motion area. 3. Select the Al arm Output c heck box. 4. Select a Control Output to activate for the sel ected camera. 5.
47 FRAME SETUP OVERVIEW The Frame Setup menu allows confi guration of the PP S, resolution, qua lity, and sens itivity of camera c hannels. When co nfigurin g th e PPS sliders the BLUE slider represe nts th e PPS the DVR will recor d during intensive recordin g and have available for transmitti ng t o remotely connected systems.
48 Frame Setup (Real Time Models) Frame Select Blue Slider : Sets the PPS recorded durin g intensive rec ording and available for viewing on a rem ote client PC. Red Slider: Sets the PPS recorded by the DVR during normal recording. Video Quality Lower quality vid eo has a smaller file size but appe ars more pixilat ed.
49 Maximum PPS Table PPS Breakdown for Each Resolution Resolution CCTV x480 model x240 model 360x240 1CIF 480 PPS 240 PPS 720x240 * 2CIF 240 PPS 120 PPS 720x480 ** 4CIF 120 PPS 60 PPS Resolution CCTV .
50 SCHEDULE SETUP Recording Schedule The Recording Sched ule window allows the user to create different reco rding schedules based on the day, time, and ty pe of reco rding desired.
51 Sensor Schedule The Sensors will supers ede all other types of recording modes (Motion a nd Continuous). R egardless of the recording sc hedule of a particular camera, if a sensor even t occurs the ass ociated cameras wil l begin recording as a Sensor Event .
52 Create a Recording Schedule 1. Select a day to begin creating the sch edule for -or- cli ck Single Day Selection , ena bling Multi Day Selectio n , to create the same schedule for multiple days. 2. Highlight the Time-Blocks with in the Recording Schedule window for the camera(s) selected to sc hedule.
53 Special Day Schedule The user can crea te days that hav e a unique rec ording schedul e. If necess ary create these on days that are ‘ not typical’ such as Holidays, Special Events, etc. Creating/Editing a ‘Sp ecial Day’ Schedule 1. Click Normal Day Mode to enable the Special Day Mo de .
54 System Restart Setup System Restart Setup allows the user to define a sche dule wherein the DVR automatically restarts according to specified p arame ters. Create System Restart Schedule 1. Click Schedule on the Setup s creen. 2. Click Restart Setup .
55 SENSOR SETUP The Alarms setup window allows you to e nable, disabl e and configur e Sensors and Relay s (Control Outputs) . Configure Sensor Response 1. Click Setup on the Display screen. 2. Click Sensor . 3. Click the NO or NC check box to select Normally Ope n or Normally Clos ed for the desired s ensor.
56 Activate PTZ Preset on Sensor 1. Create a PTZ Pre set Position. See i nstructions in t he PTZ Setup chapt er. 2. Click Setup on the Display sc reen. 3. Click Sensor. 4. Click Sensor Preset . 5. Select the desired c amera from the Channel list. 6. Select the appropriate Sensor fro m the list.
57 GENERAL SETUP Function Beep on Login Fail Enables the DVR to be ep continuously in response to a failed login att empt. Only an aut horized login will stop the beep ing. Sequence Setting Allows the video out pictu re to automatica lly cycle thro ugh channel s at a set speed.
58 Intensive Recording Overview The Intensive Rec ording Option allows you to increase the Pictures Per Second of any camera, usin g sensor or motion activation .
59 TV-Out Setup (Multiplexer) The Multiplexer T V Out card is an o ptional upgrade t hat allows users to output video in a sequenc e or a matrix display.
60 Control Multiplexer M ode Display 1. Click TV Out on the Display sc reen. 2. Click Multiplexer . 3. To change th e camera that is displayed on th e monitor, c lick the desired camera number in the row that the monitor is connec ted to. Tip Port 1 is the top port on the TV Out card.
61 Volume The volume contro l allows fine tuni ng of the volume s ettings on the DVR. Volume Options: • Slider Controls – Used to a djust the literal vol ume for the respective devi ces listed.
62 Auto Sequence Setting Auto Sequencing i s available eit her in the Displ ay screen when A uto Sequencin g has been enable d or when a Spot- Monitor out sig nal is used to dis play on a spot monitor. Auto S equencing c onveniently dis plays video cha nnels at spec ified inter vals and sequ ences through each se lected channe l.
63 NETWORK SETUP Network Setup allows the user to ad just settings such as Po rts, setup emerg ency PPP information for use w ith the Emergency Age nt and enable Remot e Access. Transport Rate A bandwidth throttl e based on percen tage of free networ k.
64 PAN/TILT SETUP The Pan/Tilt Setu p display allows enabling of PTZ c ameras, creation of Presets, c reation of Tours, a nd adjustment of c amera sp eed settings.
65 ADMINISTRATIVE SETUP Disk Management The Disk Management window is a nativ e Windows func tion. This windo w displays the p artition scheme a nd health status of the Ha rd Disk Drives in the DVR. This window is often us ed to troubles hoot a DVR, or verify the amount of Hard Driv e storage installe d.
66 Setting Up DDNS Dynamic Domain Name System (DDNS) is a se rvice that provid es a stat ic address to simplify re mote connection to t he DVR. This service is most us eful for instal lations where the WAN (public) IP addres s is dynamic (cha nges from time to t ime).
67 User Management The User Management Console allows the administrator to c reate, edit, and delete user ac counts. Each us er account can be assigned different priv ileges to limit the us age of the DVR system.
68 User Rank The User Ranking structure allows the optio n to assign a privil e ge system (1-10 where one has the most rights) to u sers of the DVR Software. For exampl e. Since only one user is allow ed to use the PTZ controls at any one time, an a dministrator with a higher rank can kick another u ser out and take c ontrol of the PTZ.
69 Status Check / Email General 1. Click Setup on the Display sc reen. 2. Click Administrative . 3. Click Status Check/Email . 4. Select the En abl e Email Alarm chec k box. 5. Enter a From Name and e-mail Address . Note This name and address will appear in the From line of the email alert message.
70 Storage Check 1. Set up the General an d Users tabs firs t. (see above) 2. Select the Use St orage Check check box. 3. Define the number of min utes. 4. Select an Alert Op tion, Beep or Popup Mes sage, if desi red. 5. Click Apply. Recording Data Check 1.
71 SMART Information The SMART Information tab display s Hard Drive informati on. SMART Alert 1. Setup the General and Users tabs first. (see above) 2. Select the Enable SMART Alarm. 3. Define the number hours between SMART checks. 4. Select the ty pe of SMART event to trigger an acti on.
72 INSTANT RECORDING The Instant Recor ding feature allow s users to ma nually initiate rec ording on a spec ific camera, ov erriding the current s chedul e.
73 SEARCH This chapter inclu des the following information: • Setup Overview • Daylight SAVIng Time • Index Search • Preview Search • Graphic Search • Motion Search.
74 SEARCH OVERVIEW The DVR has several opt ions that allow th e user to eas ily search through, a nd find, a parti cular section of video. From Mot ion /Sensor indexing to calen dar views highli ghting days with rec orded video; th e DVR is equipped to help the us er quickly find a specific video or event.
75 Adjust the Brightness of an Image 1. Select an ima ge to adjus t by double-c licking on the d esired image. M ultiple images cannot be adjus ted at one time. 2. Move the Brightn ess slide bar to th e right or left to adj ust the brightness. 3. Reset the Brightne ss by moving the s lider back to the center of the bar.
76 PERFORMING A BASIC SEARCH There are several different types o f searches that ca n be performed on the DVR. The most basic involves s electing the da te, ti me, camera, and clic king play. 1. Click the Calen dar button to s elect a date. 2. Select a time by clicking th e up and down arrows to t he right of the t ime display.
77 SAVE TO JPG OR AVI The DVR can export single im ages in a JPG Image fi le format and save v ideo clips in a n AVI format. Both J PG and AVI file for m ats are the most com monly used graphi cal formats today. Virtually every co mputer offers som e type of support f or these file form at s which make them the most ideal f ormats to use.
78 Bookmarks Use bookmark s to mark a video c lip during a searc h. Export bookmarke d data using th e Clip Backup featur e. 1. Perform a searc h for the desired vide o. 2. Stop playbac k at the beginn ing of the desir ed clip. 3. Right-click the video and selec t Start Bookmark .
79 Single Clip Backup Along with the Sav e option, a single camera backup option is also inc luded with the Survei llix software. The s ingle Camera or Clip Backup allows the user to backup a single camera wit hout hAVIng t o backup multiple cameras at a give n time.
80 INDEX SEARCH Using the Index S earch can greatly decrease the am ount of time spent searching t hrough saved vid eo. The Index Searc h allows a us er to perform a search based on criteria such as Sensor, M otion and Insta nt Record events Performing an Index Search 1.
81 PREVIEW SEARCH Preview Search c an be used in a number of circumst ances to quick ly find an exact m oment where an event , such as a th eft, occur red. The Preview Sear ch gives a 24 Hou r visual overview of a single c amera by separat ing a 24 hour period (1 day ) into 24 images , on e image for each ho ur of the day.
82 Performing a Preview Search 1. Select a sing le camera by eit her turning of f all cameras but o ne or double-c licking a displ ayed image. 2. Click Preview Search . 24 images display. If ther e is no recorded vid eo during a port ion of the d ay, “No Image” will be displayed where the image s hould be.
83 OBJECT SEARCH Object Search is a powerf ul search utility that is used to search a regi on on the video f or any motion c hanges. Results are n eatly displayed and c an be view ed quickly. Performing an Object Search 1. Perform a Basic Search. See the in structions on Performi ng a Basic Searc h.
84 MOTION SEARCH The Motion Searc h provides a dyna mic display of the levels of motion in rec orded video. Adjus t the level of motion to only pl ay clips of video at or ab ove that level.
85 SEARCH IN LIVE The Search in L ive feature allows users to review eve nts immediately w hile monitoring l ive video. Pa use, rewind, and res ume l ive video within secon ds of an alarm eve nt or suspicious ac tivity. 1. Move the mous e cursor over t he desired l ive video displ ay on the Live Dis play screen.
86 NOTES:.
87 PAN / TILT / ZOOM This chapter inclu des the following information: • Overview • Setting up the P TZ • Creating and View ing a Preset Positi on • Creating and View ing a Preset Patter n.
88 PAN / TILT / ZOOM OVERVIEW The PTZ controls within the DVR allow for powerful control over t he cameras. Th is can be extreme ly beneficial by i ncreasing th e usefulness of t he recorded vide o. Using the PT Z controls y ou can create cus tom preset confi gurations that c an continuously swee p across large areas .
89 Supported PTZ Protocols Protocols are add ed frequently. Th e supported lis t may contain n ew protocols that are not listed h ere. The current supported protocols are: ADEMCO RAPID DOME AMERICAN D.
90 ADVANCED PTZ SETUP Note Preset and Tour options may vary depending on the camera Creating and Viewing Preset Positions A Preset Pos ition is a us er-defined loc ation where the camer a can be poi nted, zoomed in, and focused. Pres et positions can be defined and lab eled if the camer a supports this .
91 PTZ Address Settings Some protocols support software addr ess settings. The RX Addresses and ID settings are compatibl e with a particular line of receivers th at support 2 ID ad dresses. The PT Driver Address is ass ociated with the PTZ ID addr ess set on the camera.
92 CONTROLLING A PTZ CAMERA The Surveillix DVRs prov ide control for a PAN/TILT/Z OOM camera in tw o different ways. The first method is to use the Graphi cal PTZ Controller that appears when th e PTZ button is clicked on the Dis play screen. The second metho d is to use the mouse to control th e camera directly fr om the live v ideo display.
93 Using the On-Screen Compass 1. Click Setup on the Display sc reen. 2. Click PTZ . 3. Select the On S creen Compass ch eck box to enable the feature. 4. Click Apply . 5. Click Exit to return to the Dis play screen. 6. Click PTZ . 7. Control the PTZ b y dragging the m ouse on the s creen in the desired directio n.
94 PTZ Tour Schedule Create PTZ Tour Schedule 1. Click Setup on the Display sc reen. 2. Click PTZ . 3. Click Tour Schedule to open the PT Z Tour Schedule window. 4. In Single Sele ct Mode select one day of the week to create a sc hedule for or toggle to Multi Select Mode to select mult iple days with the sa me schedule.
95 BACKING UP VIDEO DATA This chapter inclu des the following information: • Overview • Saving Video to a DVD • Saving Video from a Single Camera • Scheduling Regular Vid eo Backup.
96 BACKUP OVERVIEW The Backup Cente r allows you to bac k up recorded v ideo data from multiple dates and times to o ne or more locatio ns including t he DVD-RW drive, Network Storage Loc ations, and Exter nal Hard Drives. The DVR can easily backup important v ideo data to an int ernal or external m edia location.
97 General Screen Overview The General Backup Scree n is used for perfor ming bulk bac kup of video rec orded by all cameras for a select ed period, or period s, to a specified stor age locatio n. Hour / Minutes Recording data di splays in hourly (2 4 horizontal col umns) and 10- minute (6 vertical c ells) segments.
98 Clip Screen Overview The Clip Screen is used for backing up video recorde d by individu al cameras for a se lected period o f time to a s pecified stora ge location Performing a Clip Backup 1. Click Backup on the Display s creen. 2. Click the Clip tab at the top of the Backup Center window.
99 Scheduled Screen Overview The Scheduled Ba ckup Screen is us ed for performing bulk backup of video recorded by all cameras for a select ed period, on a r eg ular scheduled basis (1-24 hours). The Scheduled Backup Sc reen is similar to the General Bac kup Screen.
100 NOTES:.
101 LAN / ISDN / PSTN CONNECTIONS This chapter inclu des the following information: • Overview • Configuring TCP/IP Setti ngs • Connecting to a LAN • LAN / ISDN / PSTN Connections.
102 LAN OVERVIEW The DVR can be eas ily connected to a Local Area Network (LAN) and uses Micros oft’s® powerful and secure Windows® XP Embedded operating system. This a llows for easy and well-documented instructions on setting up LA N connections no matter what type of LAN you want t o use.
103 WEB VIEWER This chapter inclu des the following information: • Overview • Configuring the W eb Viewer.
104 WEB VIEWER OVERVIEW The DVR allows you to acc ess video using Microsoft® Intern et Explorer® 7. Highlights: View Live Video from most computer s Username and Pass word protected Easy to use grap hical interface Basics: 75 users can acc ess the Web DVR simulta neously.
105 Configuring the Server for Remote Connection 1. Click Setup on the main dis play screen. 2. Click Network . 3. Clear the Disable Remote Control check box . You should now be allowed to adjus t port settings i f necessary. NOTE: If you are using a Firewall, it may be necessary to adjust the port settings on bot h the DVR and the Firewall.
106.
107 INCLUDED SOFTWARE SETUP This chapter inclu des the following information: • Emergency Agent Overv iew • Remote So ftware Overvie w • Digital Verifier • Backup Viewer • SCS Multi Site Sof.
108 EMERGENCY AGENT OVERVIEW The Emergency Agent software is a utility that streams video acro ss a Loc al Area Network to a Clien t PC when an alarm is det ec ted on the DVR. The vide o that streams across can be sto pped, played forw ards and back wards, in slow motio n or real speed.
109 Setup Window Network Port Indicates the p ort which the Emergenc y Agent uses to lis ten for incoming ev ents. This number sho uld be changed to the same number as is set i n the Emergency Port i n Network Settings on t he DVR. Save Directory Sets the location that r ecorded video foot age is saved to.
110 Add Items to Alarm Confirm List 1. From the Option menu, click Setup . 2. Type the des ired text in the box below the Al arm Confirmation List. NOTE: The items in the Alarm Confirmation List will be availa ble on a lis t under Status Setting in main Emergency Agent s creen.
111 SEARCH ALARM WINDOW Export Quality It may be neces sary to reduce the ov erall size of an AV I file; for exampl e, to email to s omeone. AVI file sizes can be reduced by re ducing the im age quality. However, r educing the image quality causes the AVI v ideo to appear more pixilated.
112 REMOTE SOFTWARE OVERVIEW The DVR was specifically designed to be fully operated and maintained re motely. It connec ts using the s tandard TCP/IP protoc ol thorough connecti on types such as DSL, Cab le Mode, T1, ISDN, 56K Modem, LAN, and more.
113 Remote Software Setup Installing Remote Software 1. On the client c omputer, insert th e Surveillix Softwar e CD into the CD-ROM. Th e CD should play aut omatically. 2. When prompted, select the Install R emote Software option. Follow t he installation i nstructions carefu lly.
114 Configuring the DVR In or der to access the DVR remot ely, the DVR Server must be setup to a llow remote connections . Time Out Value Specifies a value ( in seconds) to wa it for a signal from the Surveillix Remote Client. If a signal is not received by that time, the conn ection is dropped.
115 DIGITAL VERIFIER OVERVIEW JPG images and AVI video files th at are exported fr om the Digital V ideo Recorder ar e automatically e mbedded with a di gital sig nat ure. Digital Signatures are a way to verify the authenticity o f the images t o ensure that they have not bee n tampered with or edit ed in any way.
116 BACKUP VIEWER OVERVIEW The Backup View er allows you to pl ay back the ex ported video in its proprietary format. Video saved i n this format is extreme ly difficult to tamp er with and therefor e is the ide al solution when l aw enforcement and th e legal departm ent are involved.
117 SCS OVERVIEW SCS software is Network DVR Mana gement Software; a powerful utility that allows 1 00 or more DVRs to be control led using one computer. This s oftware allows you t o view live video, search saved vid eo, edit and conf igure setup on e ach DVR, and import ma ps of buildings an d other locati ons.
118 NOTES:.
119 APPENDIX: SPECIFICATIONS XVS SPECIFICATIONS 4 (120 PPS) 16 (240V PPS) 16 (240 PPS) CPU Intel® CPU Storage (Hard Drive) 500 GB Standard / 2 TB Maximum Storage MAX Up to 2 HDD with DVD±RW RAM 1 GB.
120 DVS/HVS SPECIFICATIONS 8 16 32 CPU Intel® CPU Storage (Hard Drive) 500 GB Standard / Virtually Unlimited Storage Potential Storage MAX Up to 4 HDD with DVD±RW RAM 1 GB Operating System Microsoft.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba DVS16-480-X (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba DVS16-480-X noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba DVS16-480-X - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba DVS16-480-X reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba DVS16-480-X erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba DVS16-480-X besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba DVS16-480-X verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba DVS16-480-X. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba DVS16-480-X gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
