Benutzeranleitung / Produktwartung D-VR650KU des Produzenten Toshiba
Zur Seite of 123
D-VR660KU Printed in China 1VMN24613 / E9MG0UD TOSHIBA DVD VIDEO RECORDER / VIDEO CASSET TE RECORDER D VR660KU TOSHIBA DVD VIDEO RECORDER / VIDEO CASSET TE RECORDER © 2008 Toshiba C orporation Owner’s Record The model number and serial number are on the back of your DVD Recorder.
2E N PRECA UTIONS This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
3 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others PRECA UTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water.
4E N PRECA UTIONS The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the copyright laws of the United States and other countries, and may subject you to civil and/or criminal liability.
5 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others PRECA UTIONS Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on pages 113-116 before returning the product.
6E N C ONTENT S Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this Owner’s Manual . . . . . .
7 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CONTENTS Playback INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 61 Structure of Disc Contents . . . . . . . . . . .
8E N FEA TURES This unit not only plays back DVD, CD and cassette tape but also offers features for you to record on DVD/cassette tape and edit them after that.
9 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others FEA TURES Discs for Recording, Playing back Disc type DVD-RW DVD-R DVD+RW DVD+R .
10 EN Discs for playing back Disc Type DVD-VIDEO CD-DA CD-RW CD-R Logo Icon Files for playing back Recording/Pla ying back Type of title MP3 WMA JPEG DivX® VCR Icon Media CD-RW/-R CD-RW/-R CD-RW/-R CD-RW/-R DVD-RW/-R DVD+RW/+R Cassette Tape is a trademark of DVD Format/L ogo Licensing Corporation.
11 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others FUNCTIONAL OVERVIEW Front Panel 19 16 15 14 20 21 17 18 13 12 9* 10 8 1 2 4 3* .
12 EN FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
13 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others FUNCTIONAL OVERVIEW 1. INPUT SELECT button • Press to select the appropriate input. 2. OPEN/CLOSE A button DVD mode: • Press to open or close the disc tray.
14 EN Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [VCR/DVD] . DVD mode Press [DVD] on the remote control. (Verify that the DVD indicator is lit.) VCR mode Press [VCR] on the remote control.
15 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CH 10 1/ 5 1/ 5 - RW VR ORG 0:01:00 / 1:23:45 SP 1:53 2 5 61 3 4 7 4 * This is an example screen only for explanation. 1. Indicates a disc type and format mode.
16 EN • First, track name will be displayed. T rack Name • If you press [DISPLAY] one more time, artist name will be displayed. Artist Name • If you press [DISPLAY] one more time, album name will be displayed. Album Name • If there is no artist, track or album name, “Not Available” will be displayed.
17 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others 1. Format (DVD-RW, DVD+RW only) : Allows you to format the disc. 2. Finalize: Allows you to finalize a disc containing recorded titles.
18 EN FRONT P ANEL DISPLA Y GUIDE PM DTV BS CS DR CD VCR HDD DB DVD 1 5 3 4 2 Appears when data is being recorded on a disc. Appears when a disc is loaded on the disc tray. DVD Appears when the disc tray is opening. DVD Appears when HDMI output mode (720p) is selected.
19 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others ANTENNA CABLE C ONNEC TION This section describes how to connect your unit to an antenna, cable box, etc.
20 EN RF MODULA T OR C ONNEC TION If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet.
21 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below.
22 EN Make one of the following connections, depending on the capabilities of your display device. C ONNEC TION T O A T V S-VIDEO IN DVD DIGIT AL AUDIO OUT AUDIO OUT S-VIDEO OUT COAXIAL L R Y P B /C B.
23 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CONNECTION TO A TV WITH AN HDMI ™ COMPATIBLE PORT A simple 1-cable connection.
24 EN *HDMI: High Definition Multimedia Interface Copyright protection system To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system).
25 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others C ONNEC TION T O AN A UDIO SY STEM • When you change the connections, all devices should be turned off. • Refer to the owner’s manual accompanying external devices for more information.
26 EN INITIAL SET TING When turning on this unit for the first time, you need to follow these steps. 1 Press [I/ y y ON/STANDBY]. Before: Turn the TV on. Select the input to which the unit is connected. 2 Use [ K / L ] to select your desired language, then press [ENTER] to set language.
27 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CHANNEL SET TING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures.
28 EN 1 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add or delete channels. 2 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. 3 Use [ K / L ] to select “Channel”, then press [ENTER].
29 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others ANALOG 5 Select the channel number to add or delete. • Use [CH / ] to cycle through only the memorized channels. • Use [ { / B ] to cycle through all the channels including the ones not memorized.
30 EN SET TING THE CL OCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 31. Note • The unit receives the clock data at 12:00 a.
31 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SET TING THE CL OCK 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. 2 Use [ K / L ] to select “Clock”, then press [ENTER].
32 EN TUNER SET TINGS Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control. Press [DTV/TV] on the remote control.
33 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others TUNER SET TINGS 1 Press [AUDIO ] to cycle through available audio languages. English 1/2 • When you press [AUDIO ] , selected language will be displayed on the TV screen.
34 EN 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. 2 Use [ K / L ] to select “Channel”, then press [ENTER]. “Channel” menu will appear. 3 Use [ K / L ] to select “TV Audio Select”, then press [ENTER].
35 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. 2 Use [ K / L ] to select “Display”, then press [ENTER].
36 EN 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. 2 Use [ K / L ] to select “Display”, then press [ENTER].
37 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others 6 Use [ K / L ] to select the item and switch the setting for each item you want to set, then press [ENTER]. • When “User Setting” is set to “ON”, you can set the following items.
38 EN FORMA T TING A DISC Choosing the Recording Format of a Brand-New DVD-RW When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the unit.
39 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others FORMA T TING A DISC Reformatting a Disc Manually If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”.
40 EN SET TING A DISC T O PRO TEC T 1 Press [SETUP]. 2 Use [ K / L ] to select “DVD Menu”, then press [ENTER]. 3 Use [ K / L ] to select “Disc Protect OFF ON”, then press [ENTER]. e.g.) VR mode DVD-RW DVD Menu Format Finalize Disc Protect OFF ON Delete All Playlists 4 Use [ K / L ] to select “ Yes”, then press [ENTER].
41 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others PLA Y ING THE DISCS IN O THER DVD PLA Y ERS 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER].
42 EN PLA YING THE DISCS IN OTHER D VD PLA Y ERS Finalizing a Disc 1 Press [SETUP]. 2 Use [ K / L ] to select “DVD Menu”, then press [ENTER]. “DVD Menu“ menu will appear. 3 Use [ K / L ] to select “Finalize”, then press [ENTER]. 4 Use [ K / L ] to select “ Yes”, then press [ENTER].
43 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others PLA YING THE DISCS IN OTHER D VD PLA Y ERS To cancel finalizing... (DVD-RW only) Press [STOP C ] during the finalizing is in progress.
44 EN INFORMA TION ON D VD REC ORDING You can select a recording mode among 5 options, and the recording time will depend on the recording mode you select as follows.
45 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SET TINGS FOR A REC ORDING Use this feature to make the discs recorded on other unit recordable on this unit.
46 EN SET TINGS FOR A REC ORDING You can enjoy high quality sound recording. This function works only when the recording mode is set at XP. 1) Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. 2) Use [ K / L ] to select “Recording”, then press [ENTER].
47 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others BASIC RECORDING & ONE-TOUCH TIMER RECORDING 1 Press [I/ y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected.
48 EN BASIC REC ORDING & ONE- T OUCH TIMER REC ORDING 7 Press [STOP C ] to stop recording. The recorded title will be included in the title list. (Refer to “Guide to a Title List” on page 80.) Wait f or a moment 90% This operation may take awhile to be completed.
49 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others TIMER REC ORDING 1 Press [TIMER PROG.
50 EN 3 Use [ K / L ] to enter the date, then press [ B ]. Timer Programming 1/1 TUE JAN/01 10:00AM Date Start End CH New Program Date JAN/02 SP 2 : 00 Start - - : - - End - - : - - Mode SP CH REC To .
51 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others TIMER REC ORDING How to select a channel number for the timer recording Analog TV For channel number 2-6, press [ B ] or [ – ] to decide the channels.
52 EN Checking, canceling, or correcting the timer programming information If the timer program did not complete correctly, the error number appears in the timer pro- gramming list. 1) Press [TIMER SET]. 2) Press [TIMER PROG.]. 3) Check the information on the list you want to edit.
53 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others TIMER REC ORDING Hints for Timer Recording PROG. A PROG. B actual recording PROG. A PROG. B When the starting time is the same: A program set previously (PROG.
54 EN SET TINGS FOR AN EXTERNAL DE VICE Connection to an External Device 1 Press [SETUP]. 2 Use [ K / L ] to select “General Setting”, then press [ENTER]. Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.
55 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SET TINGS FOR AN EXTERNAL DE VICE Recording from an External Device 1 Turn on the TV and press [I/ y y ON/STANDBY], and be sure to select the input of the TV to which the unit is connected.
56 EN DV DUBBING Guide to DV and On-Screen Display This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode.
57 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others DV DUBBING DVC to DVD Dubbing Before recording from DVC, see page 54 for connection instructions. 2 Press [REC MODE] to select a recording mode.
58 EN DV DUBBING Note for DV dubbing • If you press [PAUSE F ] at step 5 in “DVC to DVD Dubbing” on page 57, the tape will rewind to the point a few seconds preceding the paused point. When you press [ENTER] at step 6 in “DVC to DVD Dubbing” on page 57, then, it will start dubbing when it comes to the paused point.
59 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others DVD/V CR DUBBING 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [ENTER]. “General Setting” menu will appear.
60 EN 4 Use [ K / L ] to select “VCR DVD”, then press [ENTER]. General Setting Auto Chapter Recording Audio Select (XP) Auto Finalize Aspect Ratio (Video mode) Dubbing Mode Make Recording Compatible Playback Display Video Recording Clock Channel DivX HDMI Reset All Dubbing Mode VCR DVD DVD VCR 5 Press [SETUP] to exit.
61 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others INFORMA TION ON PLA Y BA CK Structure of Disc Contents The contents of DVD are generally divided into titles, and the titles are subdivided into chapters.
62 EN BASIC PLA Y BA CK Direct Playback 1 Press [I/ y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. 2 Press [OPEN/CLOSE A ] to open the disc tray and insert your disc with its label facing up.
63 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others BASIC PLA YBA CK 1 Press [I/ y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD].
64 EN BASIC PLA YBA CK Playing Back an Audio CD and a CD-RW/-R with MP3/WMA/JPEG Files 1 Follow steps 1 to 2 in “Direct Playback” on page 62. 2 Press [OPEN/CLOSE A ] to close the disc tray. It may take awhile to load the disc completely. File list will appear automatically.
65 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others BASIC PLA YBA CK Playing Back a DivX® 1 Follow steps 1 to 2 in “Direct Playback” on page 62. 2 Press [OPEN/CLOSE A ] to close the disc tray.
66 EN Note for DivX® • DivX® is a codec (compression/decompression) that can compress images to a very small amount of data. The software can compress video data from almost any devices to the size that can be sent on the Internet without compromising visual quality of the images.
67 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others BASIC PLA YBA CK Using the Title/Disc Menu DVD may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc.
68 EN SPECIAL PLA Y BA CK You can skip TV commercials to enjoy the recorded programs without interrupting. Press [DVD] first. During playback, press [INSTANT SKIP]. Normal playback will start at 30 seconds ahead from where you press [INSTANT SKIP] . Every time you press [INSTANT SKIP] , the searching point will be extended by 30 seconds ahead.
69 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SPECIAL PLA YBA CK Rapid playback function is available only during playback.
70 EN SPECIAL PLA YBA CK Zoom Note • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To exit the zoom menu, press [DISPLAY] repeatedly. • To cancel the zoom function, select “x1.0” using [ K / L ] , then press [ENTER] at step 3.
71 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SPECIAL PLA YBA CK Chasing Playback during Recording Note • Playback image may freeze momentarily using this function. However, this does not affect the recording.
72 EN You can also play back a recorded title during current recording or the timer recording on the same disc. 1) During recording, press [DISPLAY]. Screen for the current recording: CH 10 31 1:23:45 - RW VR ORG 2) Select icon using [ { / B ], then press [ENTER].
73 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SEARCH Using [SKIP j ] / [SKIP i ] Press [DVD] first. 1) During playback, press [SKIP i ] to skip the current title or chapter and move to the next.
74 EN Press [DVD] first. • For audio CD, skip to step 2. 1) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [ENTER]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 CD 0:00:15 / 0:05:00 The number next to will be highlighted.
75 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Repeat Playback Random Playback Available repeat function may vary depending the discs. Press [DVD] first.
76 EN Program Playback Note • To erase tracks you selected, press [CLEAR] at step 4. • You can make program settings up to 50 tracks. • To cancel program playback, press [STOP C ] twice during program playback. “OFF” appears on the TV screen.
77 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others DVD-video may have subtitles in one or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages during playback.
78 EN You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Press [DVD] first. • For audio CD, MP3 or WMA, skip to step 2. 1 ) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [ENTER] within 1 second, or wait for 1 second to display the selection menu.
79 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others You can adjust the black level to control the brightness of the picture in order to get a better picture. 1) During playback, press [DISPLAY].
80 EN INFORMA TION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TOP MENU].
81 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others DELETING TITLES Note • If you delete the title in DVD+RW, deleted title will be displayed as “Empty”.
82 EN DELETING TITLES You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. Be sure to read “Notes for deleting titles” on page 81 before you delete the title. 1 Press [DVD].
83 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others Adding Titles to a Playlist Playlist For VR mode DVD-RW, you can create the playlist as you wish. You can add up to 99 titles to a playlist (as long as the total number of the playlist does not exceed 999 chapters).
84 EN CREA TING/DELETING PLA Y LIST Erasing All Playlist Playlist A playlist can be deleted if it is no longer needed. 1 Press [DVD]. Press [SETUP]. Main menu will appear. 2 Use [ K / L ] to select “DVD Menu”, then press [ENTER]. 3 Use [ K / L ] to select “Delete All Playlists”, then press [ENTER].
85 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others Putting Names on Titles 4 Use [ K / L ] to select “Edit Title Name”, then press [ENTER].
86 EN 1) Use [ K / L ] to select a desired character set, then press [ENTER]. 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. ABC DEF GHI JKL MNO PQRS TUV WXYZ abc def ghi jkl mno pqrs tuv wxyz ! ” # $ % & ’ ( ) * + , - .
87 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others EDITING DISCS Setting Chapter Marks 1 Follow steps 1 to 3 in “Putting Names on Titles” on page 85 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [ENTER].
88 EN EDITING DISCS Hiding Chapters Note • ”Hidden” will be displayed in the preview window while previewing the hidden chapter. • When you make all chapters in the title “Hidden”, “Hidden” is displayed in a thumbnail of the title list.
89 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others Deleting a Part of a Title 1 Follow the steps 1 to 3 in “Putting Names on Titles” on page 85 to display “Edit” menu. 2 Use [ K / L ] to select “Scene Delete”, then press [ENTER].
90 EN EDITING DISCS Deleting a Part of a Title (cont’d) 4 Use [ K / L ] to select “Delete” then press [ENTER]. Edit - Scene Delete Start End Preview Delete JAN/ 1/08 12:00AM CH10 LP 1 PL 1 : 47 : 00 5 Use [ K / L ] to select “Yes” then press [ENTER].
91 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others EDITING DISCS Dividing a Title Playlist You can divide one title into two new titles.
92 EN EDITING DISCS Combining Titles 1 Follow the steps 1 to 3 in “Dividing a Title” on page 91 to display “Edit” menu. 2 Use [ K / L ] to select “Title Combining”, then press [ENTER].
93 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others EDITING DISCS Setting or Releasing the Title Protection 1 Follow the steps 1 to 3 in “Putting Names on Titles” on page 85 to display “Edit” menu.
94 EN EDITING DISCS Setting or Clearing All Chapter Marks at Once 1 Follow the steps 1 to 3 in “Putting Names on Titles” on page 85 to display “Edit” menu.
95 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others LIST OF THE DEF A UL T SE T TINGS The following table is the contents which you can set and the default settings. Refer to the following table for useful operation.
96 EN Setup Items (highlight is the default) Contents General Setting Display CC Style Font Opacity → page 37 Solid Transparent Translucent Flash Set the font opacity of the displayed caption. Font Color → page 37 White Black Red Green Blue Yellow Magenta Cyan Set the font color of the displayed caption.
97 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others LIST OF THE DEF A UL T SET TINGS Setup Items (highlight is the default) Contents General Setting Video TV Aspect → page 105 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide Set a picture size according to aspect ratio of your TV.
98 EN GENERAL SE T TING Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting“, then press [ENTER].
99 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others GENERAL SET TING 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.
100 EN GENERAL SET TING 2 Audio Out Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [ K / L ] to select a desired item, then press [ENTER] .
101 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others GENERAL SET TING 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [ K / L ] to select a language, then press [ENTER].
102 EN 1 OSD Language (Default : English) Set the language for the on-screen display. Use [ K / L ] to select a language, then press [ENTER]. General Setting Playback Display Video Recording Clock Cha.
103 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others 6 V-Chip With the v-chip system in this unit, you can set the viewing limitation for the analog/digital TV programs received from the tuner or recorded on DVDs to prevent your children from watching inappropriate programs.
104 EN GENERAL SET TING [Canadian English Rating] Rating Category 18+ Adult audience only higher 14+ Unsuitable for ages under 14 PG Par ental guidance suggested G General audience C8+ For childr en o.
105 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others GENERAL SET TING 1 Progressive (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does.
106 EN 3 Use [ K / L ] to select a desired item, then press [ENTER]. DivX R VO D DivX Subtitle 1 2 1 DivX® VOD This unit allows you to play back the files purchased or rented from DivX® VOD (video-on-demand) services. The files are available on the internet.
107 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others 1 Press [SETUP] in stop mode and use [ K / L ] to select “General Setting”, then press [ENTER]. 2 Use [ K / L ] to select “HDMI”, then press [ENTER].
108 EN 2 HDMI Audio (Default : ON) If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUT jack to your audio system, etc.), you can set the HDMI audio output off. Use [ K / L ] to select a setting, then press [ENTER].
109 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others Reset the setting to default. 1 Press [SETUP] in stop mode and use [ K / L ] to select “General Setting”, then press [ENTER].
110 EN VCR FUNCTIONS Playback Recording 1) Press [ I / y ON/STANDBY] on the remote control or the front panel of the unit. When you are playing back a cassette tape, turn on the TV and be sure to select the input to which the unit is connected. Press [VCR].
111 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others VCR FUNCTIONS One-touch Timer Recording (OTR) Index Search This feature allows you to set the recording length simply by pressing [REC I ] on the remote control.
112 EN VCR FUNCTIONS Time Search Other Operations This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point. Press [VCR] first. 1) Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears.
113 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others TROUBLESHOO TING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
114 EN TROUBLESHOO TING Symptom Remedy D V D • V C R The remote control does not function. • Batteries are weak. • There are obstacles between the remote control and the unit. • The remote control is far from the unit. • There are no batteries in the remote control.
115 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others TROUBLESHOO TING Symptom Remedy D V D The unit starts playing back the disc automatically. • The DVD-video features an auto playback function.
116 EN TROUBLESHOO TING Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this disc. • Unplayable disc is inserted in the unit. • The disc is upside down. • Insert the standardized disc which have the marks on pages 9-10.
117 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others LANGU A GE C ODE Language Code Abkhazian 4748 Afar 4747 Afrikaans 4752 Albania.
118 EN Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height.
119 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SPECIFICA TIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice.
120 EN LIMITED W ARR ANTY Limited United S tates Warranty Digital Audio Video (“DA V”) Product - Exchange Warranty T oshiba America Consumer Products, L.L.C. (“T ACP”) makes the f ollowing limited warranties to original consumers in the United S tates.
121 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others LIMITED W ARR ANTY /LPLWHG&DQDGLDQ:DUUDQW )RU7RVKLED%UDQG&a.
122 EN LIMITED W ARR ANTY ,)7+('$93 5 2'8&7) $,/ 6 72:2 5 .$ 6 :$ 55 $17('$%29( <28 5 6 2/($1'(;&/8 6 ,9( 5 (0('<.
123 EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others MEMO E9MG0UD_D-VR660KU_EN.indd 123 E9MG0UD_D-VR660KU_EN.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba D-VR650KU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba D-VR650KU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba D-VR650KU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba D-VR650KU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba D-VR650KU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba D-VR650KU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba D-VR650KU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba D-VR650KU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba D-VR650KU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
