Benutzeranleitung / Produktwartung B-EP2DL des Produzenten Toshiba
Zur Seite of 30
PRINTED IN JAPAN TOSHIBA Potable Printer B-EP2DL SERIES Document No. EO18-33024 Original Sep. , 2008 (Revised ) Maintenance Manual.
WARNING! Follow all manual instructions. Failure to do so could create safety hazards such as fire or electrocution. NOTE: Failure to follow manual instructions or any unauthorized modification, substitution orchange to this product will void the limited product warranty.
EO18-33024 (Revision Date: Mar. 17, 2009) CAUTION! 1. This manual may not be copied in whole or in part without prior written perm ission of TOSHIBA TEC.
1. UNPACKI NG EO18-33024 1.1 Procedure 1- 1 1. UNPACKING 1.1 Procedure 1) Open the carton. 2) Unpack the accessories from the carton. 3) Unpack the printer. NOTE: Keep the carton and pad for future transportation of the printer. 1.2 Checks 1) Check for damage or scratches on the machine.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 2-1 2. MAJOR UNIT REPLACEMENT WARNING! 1. Disconnect the power cord before installing the main parts. 2. Be careful not to injure your fingers when replacing the main parts. CAUTION! 1.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 2-2 4) Press the Top Cover Open Button to open the Top Cover. 5) Remove the Left Side Cover in the direction of the arrow. 6) Remove the Right Side Cover and the Front Cover in the direction of the arrow, respectively.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 2-3 7) Remove the Front Cover. 6) Disconnect all Connectors and FPC Cable from the CPU PC Board. NOTE: Before disconnecting the FPC Cable, release the Connector Lock. 7) Disconnect the Earth Terminal from the Drive PC Board.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 2-4 8) Open the Hooks, then remove the CP U PC Board from the Front Cover. 9) Remove the screw, then remove the Earth Terminal. 10) Replace the CPU PC Board with a new one, then reassemble in the reverse order of removal.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 2-5 11) Close the front cover. 12) Mount the left side cover to the printer while fitting the tabs on the left side cover into the slots of the printer enclosure. Fit the tabs A to C into the slots A’ to C’.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 2-6 13) Mount the rig ht side cover to the printer while fitting the tabs on the right side co ver into the slots of the printer enclosure. Fit the tabs A to C into the slots A’ to C’.
2. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Dec. 16, 2008) 2.1 Replacing the CPU PC Board 2-7 NOTES: 1. After replacing the CPU PC Board, refer to the Setting Operation Manual or System Mode Manual and perform the following operations. 1. Perform a RAM clear.
2. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Dec. 16, 2008) 2.2 Replacing the LCD Unit 2-8 2.2 Replacing the LCD Unit 1) Remove the Right Cover, Left Cover, Fr ont Cover and CPU PC Board. (Refer to Section 2. 1 Replacing the CPU PC Board .) 2) Remove the three screws, then remove the LCD Unit.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.3 Replacing the Peel-off Roller 2-9 2.3 Replacing the Peel-off Roller 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the two Roller Clips with a straight slot screwdriver, then remove the Peel-off Roller Ass’y.
2. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Mar. 17, 2009) 2.4 Replacing the Peel-off Sensor 2-10 2.4 Replacing the Peel-off Sensor 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Disconnect the Connector from the CPU PC Board.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.4 Replacing the Peel-off Sensor 2-11 5) Remove the Peel-off Sensor. 6) Replace the Peel-off Sensor with a new one, t hen reassemble in the reverse order of removal.
2. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Mar. 17, 2009) 2.7 Replacing the Stepping Motor 2-12 2.5 Replacing the Stepping Motor 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the two Gears.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.7 Replacing the Stepping Motor 2-13 4) Disconnect the Connector from the Drive PC Board. 5) Remove the Stepping Motor. 6) Replace the Stepping Motor with a new one, then reassemble in the reverse order of removal.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.5 Replacing the Drive PC Board 2-14 2.6 Replacing the Drive PC Board 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the Stepping Motor. (Refer to Section 2.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.5 Replacing the Drive PC Board 2-15 6) Replace the Drive PC Board with a new one, t hen reassemble in the reverse order of removal.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.6 Replacing the Battery Terminal 2-16 2.7 Replacing the Battery Terminal 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the Stepping Motor. (Refer to Section 2.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-17 2.8 Replacing the Print Head 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Release the Hooks, then remove the Media Sensor Holder Ass’y upward.
2. MAJOR UNIT REPLACEMENT EO18-33024 (Reviosion Date: Dec. 16, 2008) 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-18 5) Disconnect the Head FPC from the Print Head Connector. 6) Remove the Print Head Ass’y. 7) Disconnect the Head FPC Cable from the Drive PC Board Connector.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-19 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .
2. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Dec. 16, 2008) 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-20 5) Remove the Cover Open Switch (L) and Cover Open Switch (R) from the Base Cover.
2. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Dec. 16, 2008) 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-21 NOTES: 1. After replacing the Media Sensor, refer to the Setting Ope ration Manual or System Mode Manual an d perform the following operations.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.10 Replacing the Media Sensor (Upper) 2-22 2.10 Replacing the Media Sensor (Upper) 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Release the Hooks, then remove the Outlet Paper Guide Ass’y.
2. MAJOR UNIT REPLACEMENT EO18-33024 2.10 Replacing the Media Sensor (Upper) 2-23 5) Replace the Media Sensor (Upper) with a new one, then reassemble in the reverse order of removal. NOTE: A fter replacing the Media Sensor, refer to the Setting Operation Manual o r System Mode Manual an d p erform the following operations.
2. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Dec. 16, 2008) 2.10 Replacing the Platen Ass’y 2-24 2.11 Replacing the Platen Ass’y 1) Remove the Upper Sensor Cover. (Refer to Section 2.9 Replacing the Media Sensor (Upper) .) 2) Release the Hooks, then remove the Platen Ass’y.
3. TROUBLESHOOTI NG EO18-33024 3. TROUBLESHOOTING 3- 1 3. TROUBLESHOOTING Problems Cause Solution The printer is not turned on. 1. The battery is not loaded correctly. 2. The battery terminal is disconnected from the soldering part. 3. CPU PC board ass'y failure or Drive PC board ass'y failure 1.
3. TROUBLESHOOTI NG EO18-33024 3. TROUBLESHOOTING 3- 2 Problems Cause Solution The printer does not print labels one by one in the strip mode or specified number of labels in the batch mode. 1. The sensors are not adjusted properly. 2. The sensors are not installed properly.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba B-EP2DL (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba B-EP2DL noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba B-EP2DL - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba B-EP2DL reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba B-EP2DL erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba B-EP2DL besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba B-EP2DL verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba B-EP2DL. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba B-EP2DL gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.