Benutzeranleitung / Produktwartung AR 3201 des Produzenten Becker Designed
Zur Seite of 30
Installation and Operation Manual DV 28110.03 Issue 1 April 1992 BECKER FLUGFUNKWERK GMBH • • Baden Airpark • • B 108 D-77836 Rheinmünster • • Telephon +49 (0) 7229 / 305-0 E-Mail info@ becker-avionics.
FIRST ISSUE AND CHANGES Issue . . . . . 1 . . . . . April 1992 LIST OF EFFECTIVE PAGES Page No.: Issue : Page No.: Issue : Title 1-I - 1-II 1-1 - 1-8 2-I - 2-II 2-1 - 2-8 3-I - 3-II 3-1 - 3-6 8-I - 8-.
Table of contents Section 1 GENERAL INFORMATION Page 1.1 Introduction 1-1 1.2 Purpose of equipment 1-1 1.3 General description 1-2 1.4 Variants survey 1-3 1.5 Specifications 1-5 1.5.1 General data Transceiver 1-5 1.5.2 Receiver specifications 1-5 1.5.
Blank AR 3201 - ( ) 1-II DV 28110.03/.04 Issue 04/92.
Section 1 GENERAL INFORMATION 1.1 Introduction The following Handbooks describe the VHF-communications transceiver AR 3201 - ( ). The Handbooks DV 28110.03 ( ,, Installation and Operation ‘‘ ) and DV 28110.04 ( ,, Maintenance and Repair ‘‘ ) contain the following sections : Section DV 28110.
rigid fuselage mounting in all aircraft. The VHF transceiver is designed for compliance with RTCA and EUROCAE airworthiness requirements. 1.3 General description The VHF transceiver is designed as a single-block unit with dimensions in keeping with 58 mm diameter standard instrument size.
The transceiver also contains a stage for monitoring the aircraft supply voltage. This stag e is ON as soon as the transceiver is switched on. Should the aircraft supply voltage drop to 11 V - 10.5 V, the readout will commence flashing. For operation on an 28 V aircraft system a voltage regulator (VR 2011 ) is necessary.
Transceiver AR 3201-( ) Drawing No./ Order No Type Voltage measurement Tamperature measurement in deg Celsius Temperature measurement in deg. Fahrenheit 760 channel 720 channel 28110-00000.000 389.528-910 AR 3201-( ) no no no yes 28111 -00000.000 397.
1.5 Specifications 1.5.1 General data Transceiver Operating voltage 12,4 V . . . 15,1 V Emergency operation (10,0 V) Intelligible communication Current consumption 14 V without Panel illumination Receive ,, stand by ‘‘ typ. 70 mA Receive ,, stand by ‘‘ with auxiliary input typ.
Squelch fixed in unit, defeatable with squelch switch AGC characteristic from 5 µ V . . . 100 mV emf ≤ 6 dB Undesired radiation ≤ 4 x 10 -10 watt Distortion / m = 85% ≤ 10 % Frequency response audio channel relative to 1000 Hz / 0 dB ≤ 6 dB 350 Hz .
Frequency response ≤ 6 dB 350 Hz . . . 2500 Hz Distortion / m = 85% / 1000 Hz ≤ 10% m = 85% / 350 - 1000 Hz ≤ 20% Carrier noise level ≥ 35 dB 1.5.4 Optional functions Digital voltmeter (operating voltage indication) 7 V . . . 35 V DC ± 0.1 V Ditial thermometer - 20°C .
When the transceiver incorporates the temperature or voltage measurement option, the following items are required : 1 Cable connector complete Order No. 431.036-950 Detail parts 1 Cable connector plug for option Order No. 710.687-277 Temperature sensor - 65°C .
Table of contents Section 2 INSTALLATION Page 2.1 General 2-1 2.2 Pre-instailation check 2-1 2.2.1 General 2-1 2.2.2 Visual inspection 2-1 2.3 Mechanical installation 2-1 2.3.1 Mechanical installation VHF transceiver 2-1 2.3.2 Mechanical installation of a temperature sensor 2-1 2.
Blank AR 3201 - ( ) 2-II DV 28110.03/.04 Issue 04/92.
Section 2 INSTALLATION 2.1 General Installation of the VHF communication transceiver and the battery box depends on the ty pe of aircraft and equipment involved, the instructions given in this section thus being only generally appl icable. 2.2 Pre-instailation check 2.
The temperature measuring circuit in the VHF transceiver and the temperature sensor are calibrated in the factory together for optimum temperature measuring accuracy.
View showing components side of audio module Fig. 2-1 Jumpers location for charging the microphone input from dynamic to standard mic rophone 2.4.3 Speaker/headphones connection The audio output of th.
Fig. 2-2 Panel connection 2.5 Auxiliary audio input (optional) (standard as of module No. 471) The auxiliary audio input permits audio input from other equipment in the aircraft.
Fig. 2-4 Dimensions of VHF transceiver AR 3201 - ( ) DV 28110.03/.04 Issue 04/92 Page 2-5.
Fig. 2-5 Aircraft wiring AR 3201 - ( ) Page 2-6 DV 28110.03/.04 Issue 04/92.
Fig. 2-6 Wiring diagram AR 3201 - ( ) with Speaker - Junction AR 3201 - ( ) DV 28110.03/.04 Issue 04/92 Page 2-7.
2.6 Testing after installation 2.6.1 Ground testing with engine OFF After installing the transceiver, measure antenna matching between antenna base and ant enna feeder by means of a VHF reflection meter (voltage/standing-wave meter).
Table of contents Section 3 Operating Instructions Page 3.1 Control and Indicators 3-1 3.2 Operating instructions for serial no. 0 to serial no. 3999 3-3 3.3 Operating instructions serial no. 4000 upwards 3-3 3.4 Storing frequencies 3-4 3.5 Setting the emergency frequency 3-4 3.
Blank AR 3201 - ( ) 3-II DV 28110.03/.04 Issue 04/92.
Section 3 Operating Instructions 3.1 Control and Indicators Fig. 3-1 Controls and indicators Controls and indicators Description Function Volume control Potentiometer Turning control clock-wise increases volume continuously. ON/OFF switch combined with squelch 3-position rocker switch Postion OFF : VHF transceiver OFF.
Controls and indicators Description Function Channel selector 5-position rotary switch Position A : When the transceiver is powerd up, a brief test routine is performed for the segments of the display. Afterwards the channel frequency 121,500 MHz appears in the display and the transceiver is ready for operation.
Controls and indicators Description Function Store button Pushbutton Briefly pressing the STORE button causes the display frequency to be stored in one of the four memory locations, provided that the channel selector switch is not in position A, but set to one of the four memory positions (1 - 4).
selector switch is in position A. If the channel selector switch is set to one of the stored channel frequencies (any one of switch positions 1 through 4), then the channel frequency stored in that memory location will appear in that display.
3.6 LC display blinking As soon as the operating voltage for the transceiver drops to a value of 10.5 V to 11 V, the d isplay starts blinking to signalize, e.g. in battery operation that the batteries need rechargin g. The display will start blinking in transmitter operation since this situation involves the highest curr ent drain.
3.11 Precautions In order to secure a reliable transceiver operation, please note the following precauti ons: a) Before running-up the engines, ensure that the transceiver is switched off.
Ein wichtiger Punkt beim Kauf des Geräts Becker Designed AR 3201 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Becker Designed AR 3201 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Becker Designed AR 3201 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Becker Designed AR 3201 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Becker Designed AR 3201 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Becker Designed AR 3201 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Becker Designed AR 3201 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Becker Designed AR 3201. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Becker Designed AR 3201 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
