Benutzeranleitung / Produktwartung SX5T CDMA des Produzenten Telular
Zur Seite of 44
1 1/19/04 Part Number 56029901 Phonecell ® SX5T CDMA2000 ® 1X Fixed W ir eless T erminal SX5T -505C/-535C D UAL -B AND 800/1900 MH Z CDMA SX5T -500C S INGLE -B AND 800 MH Z CDMA SX5T -500C S INGLE -.
Phonecell ® SX5T CDMA2000 ii User Manual Quick Connection Diagram Before installing the Phonecell ® SX5T , carefully remove the content s from the shipping carton and check for evidence of shipping damage. If damage is found, cont act your Authorized T elular Distributor or shipping agent immediately .
Phonecell ® SX5T CDMA2000 iii User Manual SAFE OPERA TION INSTRUCTIONS IMPORT ANT! Before installing or operating this product, read the SAFETY INFORMA TION section on page 36 of this manual. • Install the unit indoors. • Install the unit on a hard, flat surface for proper ventilation.
Phonecell ® SX5T CDMA2000 iv User Manual T able of Content s Quick Connection Diagram..................................................................................................ii Safe Operation Instructions.....................................
Phonecell ® SX5T CDMA2000 1 User Manual Setup RUIM Card Inst allation (RUIM Model Only) Consult your service provider to determine if your unit requires the use of a RUIM (Removable User Identity Module) card. If it is a RUIM model, your SX5T will only be able to make emergency calls until you install a RUIM card.
Phonecell ® SX5T CDMA2000 2 User Manual Connecting an SX5T Model With a Power Supply Y our SX5T has either a Power Supply (part #74007301) or a Battery Backup Unit (BBU; part #74006803). If your unit uses a Power Supply , please follow the instructions below to connect the SX5T to your AC power .
Phonecell ® SX5T CDMA2000 3 User Manual Emergency Batteries If your SX5T has a Power Supply , you may install emergency batteries to power the device in the event of a power outage.
Phonecell ® SX5T CDMA2000 4 User Manual Connecting an SX5T Model With a BBU (Backup Battery Unit) Y our SX5T has either a Power Supply (part #74007301) or a Battery Backup Unit (BBU; part #74006803). If your model has a BBU, it is shipped with the battery disconnected to prevent if from being prematurely drained.
Phonecell ® SX5T CDMA2000 5 User Manual SX5T Location and Inst allation The SX5T comes with a standard spike antenna (TNC) - see Figure 7 . For optimal signal strength, choose a location that is above ground and as close to windows (or exterior walls) as possible - see Figure 8 .
Phonecell ® SX5T CDMA2000 6 User Manual GPS Antenna Mounting (optional on SX5T -505C/-535C only) T o satisfy the FCC's Enhanced 91 1 (E-91 1) Phase II mandate, SX5T -505C and 535C models distributed in the USA include an optional GPS antenna with a mounting bracket and suction cups.
Phonecell ® SX5T CDMA2000 7 User Manual Direct Connection: Phone, Fax and Dat a 1. Connect a phone to either of your SX5T’s phone (RJ1 1) jacks using a standard telephone cord - see Figure 1 1 on page 6.
Phonecell ® SX5T CDMA2000 8 User Manual Getting to Know Y our SX5T LED St atus Indicators The LED indicators are activated when the SX5T is powered on. The following tables describe the modes and operation of the indicators. Service Indicator * Contact your service provider to verify that service has been activated.
Phonecell ® SX5T CDMA2000 9 User Manual Call Activity Indicator Message Indicator AC Power/Battery Indicator Import ant Dial T ones Y ou may hear these tones through the receiver when your phone is off-hook: Steady T one (dial tone): Service – Indicates that your phone is ready for use.
Phonecell ® SX5T CDMA2000 10 User Manual Using the SX5T Once you have installed and activated your SX5T , you’ll be ready to make and receive calls, set up voicemail, and send and receive faxes. This section explains how to use the features of the SX5T for all your communications.
Phonecell ® SX5T CDMA2000 11 User Manual Accessing Y our V oicemail With your SX5T , you have two options for accessing your voicemail account from your phone: One-T ouch V oicemail Retrieval and Direct Dial . (For more information about your voicemail settings, see “V oicemail Number” and “One-T ouch V oicemail Retrieval” on page 16.
Phonecell ® SX5T CDMA2000 12 User Manual Adjusting Y our Phone’ s Settings V olume Level If the volume level on your phone’s receiver is too high or too low during a call, you can adjust the levels using the telephone keypad. T o increase the phone’s volume level: • Press .
Phonecell ® SX5T CDMA2000 13 User Manual Audio Line Level If using and does not provide satisfactory volume options for you (see “V olume Level” on page 12), you may adjust your phone system’s audio line level. T o adjust your phone system’s audio line level: • From Configuration Mode, press <0, 1, or 2> .
Phonecell ® SX5T CDMA2000 14 User Manual Call Restrict (SX5T -500C only) Call Restrict allows you to determine which calls may or may not be placed through your SX5T .
Phonecell ® SX5T CDMA2000 15 User Manual Hotline The Hotline feature allows you to program the SX5T to automatically dial a specific phone number after a selected timeout delay whenever you t ake the phone off-hook.
Phonecell ® SX5T CDMA2000 16 User Manual V oicemail Number Y ou can use Configuration Mode to set the default voicemail number for your SX5T . T o set the default voicemail number: • From Configuration Mode, press <voicemail number> . For example, to set 555-123-4567 as your voicemail number , you would press .
Phonecell ® SX5T CDMA2000 17 User Manual Using Additional Hardware Devices Using an External Answering Machine The SX5T can be used with an external answering machine in place of voicemail. If you plan to use an external answering machine, be sure your service provider has not activated voicemail on your account.
Phonecell ® SX5T CDMA2000 18 User Manual Windows XP/W indows 2000 Setup for Dat a & PC Fax Contact your service provider to determine dat a/PC fax service availability , then follow these steps.
Phonecell ® SX5T CDMA2000 19 User Manual 4. Click on Add… . 5. Click on Don't detect my modem; I will select it from a list and click Next . 6.
Phonecell ® SX5T CDMA2000 20 User Manual 7. Select the COM port to use (if a COM port does not display , all COM ports are currently allocated). 8. Click Finish .
Phonecell ® SX5T CDMA2000 21 User Manual 9. Configure the SX5 modem interface using the St art > Settings > Control Panel > Phone and Modem Options > Modems tab. 10. Select the 19200 bp s Modem and click on Properties . 11 . Select the Modem tab.
Phonecell ® SX5T CDMA2000 22 User Manual 13. Configure the USB, Serial or Phone (RJ1 1) port using the Control Panel > System >Hardware > Device Manager > Port s tab. 14. Select the port used for the SX5T and right click on it. Select Properties from the resulting pop-up menu.
Phonecell ® SX5T CDMA2000 23 User Manual 15. Click on the Port Settings tab. 16. Use these settings: Bits per second: 1 15200 (19200 when faxing) Data bit s: 8 Parity: None S top bits: 1 Flow control: Hardware 17. Y ou may now send or receive data and PC faxes.
Phonecell ® SX5T CDMA2000 24 User Manual Windows 98 Setup for Data & PC Fax Contact your service provider to determine dat a/PC fax service availability , then follow these steps.
Phonecell ® SX5T CDMA2000 25 User Manual 4. Select St andard 19200 bp s Modem and click on Properties . 5. Select the appropriate COM port and Maximum speed of 1 15,200 bps for data and 19,200 bp s for PC Fax.
Phonecell ® SX5T CDMA2000 26 User Manual 7. Set Connection Preferences to Data bits = 8, Parity = None and S top bits = 1, then click Advanced . 8. Check the box for Use Control Flow , then click on Hardware (RTS/CTS) , and then select OK .
Phonecell ® SX5T CDMA2000 27 User Manual 9. Click on OK . 10. Click on Close . 11 . Y ou may now send or receive data and PC faxes. See Sending/Receiving a PC Fax (page 28), Sending/Receiving 1X Dat a (page 29), or Sending/Receiving Circuit Switched Dat a (page 30) for det ails.
Phonecell ® SX5T CDMA2000 28 User Manual Sending/Receiving a PC Fax A PC with a serial, USB, or phone (RJ1 1) connection to the SX5T can send and receive faxes using the SX5T . Y our account with your service provider must support circuit switched data transfer for the SX5T’s PC fax function to work.
Phonecell ® SX5T CDMA2000 29 User Manual Sending/Receiving 1X Dat a A PC with a serial or USB connection to the SX5T can send and receive 1X data using the SX5T ; a PC with a phone (RJ1 1) connection cannot. Check with your service provider to see if your account supports 1X dat a transfer .
Phonecell ® SX5T CDMA2000 30 User Manual Sending/Receiving Circuit Switched Dat a A PC with a serial, USB or phone (RJ1 1) connection to the SX5T can send and receive circuit switched data using the SX5T . Check with your service provider to see if your account supports circuit switched data transfer .
Phonecell ® SX5T CDMA2000 31 User Manual Advanced Programming Settings Entering Configuration Mode (Advanced Settings) The following advanced programming settings require you to place the SX5T in configuration mode. (For more information, see “Entering Configuration Mode” on page 12.
Phonecell ® SX5T CDMA2000 32 User Manual Ring Frequency If required by your system or equipment settings, you may adjust the frequency of the ring signal. T o adjust the ring frequency values: • From Configuration Mode, press <0, 1, or 2> , where <0, 1, or 2> are as follows: 0 = 20 Hz – U.
Phonecell ® SX5T CDMA2000 33 User Manual Caller ID Display Setting (SX5T -500C) The SX5T supports two types of caller ID devices: those that require the information to be transmitted to the caller ID.
Phonecell ® SX5T CDMA2000 34 User Manual Metering Pulse High Gain/Low Gain If required for your phone system application, you may adjust the metering pulse generated by your SX5T from high gain (default setting) to low gain.
Phonecell ® SX5T CDMA2000 35 User Manual SX5T T roubleshooting T elephone Service is Not Working (Cannot make or receive calls) • Make sure the SX5T powered on properly . • Make sure any equipment that is externally connected to the SX5T is connected correctly .
Phonecell ® SX5T CDMA2000 36 User Manual Conformance S t atements The SX5T 800/1900 MHz models are in conformance with all applicable FCC requirements.
Phonecell ® SX5T CDMA2000 37 User Manual Driving Check the laws and regulations on the use of cellular products in the areas where you drive. Some jurisdictions prohibit use of a cellular device while driving a vehicle.
Phonecell ® SX5T CDMA2000 38 User Manual Patent s T elular Corporation product s are protected and manufactured under one or more of the following U.S.
Phonecell ® SX5T CDMA2000 39 User Manual.
©2004 T elular Corporation, all right s reserved. Part Number 56029901 647 North Lakeview Parkway V ernon Hills, Illinois 60061, USA T el: 847-247-9400 • Fax: 847-247-0021 E-mail: support@telular .
Ein wichtiger Punkt beim Kauf des Geräts Telular SX5T CDMA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Telular SX5T CDMA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Telular SX5T CDMA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Telular SX5T CDMA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Telular SX5T CDMA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Telular SX5T CDMA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Telular SX5T CDMA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Telular SX5T CDMA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Telular SX5T CDMA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
