Benutzeranleitung / Produktwartung CDMA 2000 1X des Produzenten Telular
Zur Seite of 28
6/13/03 Part Number 56027602 P HONECELL ® SX4P CDMA 2000 1 X Fixed W ir eless Phone U SER M ANU AL.
Phonecell ® SX4P 1x ii User Manual SX4P MENU STRUCTURE SMS Menu Create Message Read Message Delete Message Dat a Mode Speed Dial Save Recall Settings Call Alert V olume Msg Alert V olume V oice Mail .
Before installing your Phonecell ® SX4P , carefully remove the content s from the shipping carton and check for evidence of shipping damage. If damage is found, cont act your Authorized T elular Distributor or shipping agent immediately .
Phonecell ® SX4P 1x iv User Manual T ABLE OF CONTENTS SX4P Menu S tructure ....................................................................................................ii Content s ..............................................................
Phonecell ® SX4P 1x 1 User Manual SX4P SETUP Emergency Batteries Inst all Batteries 1. Remove the battery access door screw that is located on the bottom of the unit - see Figure 1 . 2. Press the battery access door tab and remove the battery access door .
Phonecell ® SX4P 1x 2 User Manual Connect the Handset Before the SX4P can be operated, the handset cable must be connected - see Figure 5 . 1. Connect one end of the handset cable to the phone jack. 2. Connect the other end of the handset cable to the handset.
Connect the SX4P to AC Power 1. Attach the barrel connector of the power supply to the AC power input on the rear panel of the SX4P . 2. Connect the AC power cord to the power supply . 3. Move the AC/Battery switch to the AC position. 4. Plug the AC power cord into the wall socket.
SX4P BASICS Function Keys The keypad includes all digit s 0 through 9 and special characters hash/pound (#) and star/asterisk (*). All data entry and programming activities are performed using the keypad.
Phonecell ® SX4P 1x 5 User Manual Service Indication Full Service When it is powered on, the SX4P will display “Initializing” while it sets up, then it will display your phone number followed by the hardware and software versions. If service is available, “T elular SX4 1x” will display when the setup is complete.
FEA TURES Use the V oicemail Key (envelope ICON) to navigate up and down the menu tree. Use the Redial Key to cancel an entry . When finished with parameter changes, press the V oicemail Key to pro- gram the changes to the phone. Alternatively , lifting the handset from the cradle and replacing it will also program the changes to the phone.
Delete Messages Y ou can delete messages from the Read Messages menu or the Delete Messages menu. The Read Messages menu allows deletion of specific messages while the Delete Messages menu allows deletion of groups of message types. Deleting Messages from the Read Message Menu 1.
Dat a Features The SX4P allows for 1X p acket data and circuit switched data (CSD) using a PC connected to the data port of the SX4P . Making Dat a Calls T o make any data call from the SX4P , the unit must be in data mode. Only dat a calls can be made when the SX4P is in dat a mode.
Speed Dial Store a Number 1. Press the FLASH key , then select Speed Dial . 2. Select Save . 3. Enter the phone number to be stored, then press the FLASH key . 4. Enter the speed dial location (0-9, *, or #). 5. Press the FLASH key . View the S peed Dial List 1.
SETTINGS Use the V oicemail Key (envelope ICON) to navigate up and down the menu tree. Use the Redial Key to cancel an entry . When finished with parameter changes, press the V oicemail Key to pro- gram the changes to the phone. Alternatively , lifting the handset from the cradle and replacing it will also program the changes to the phone.
1. Press the FLASH key , then select Settings . 2. Select Zero Dial Delay . 3. Enter the desired setting. 0 = Off 1 = On (default) 4. Press the FLASH key . View Phone Number 1 Press the FLASH key , then select Settings . 2. Select MIN . The phone number of the unit will display .
SX4P TROUBLESHOOTING Unable to Send/Receive Dat a/F AX Calls Check all the connections from the SX4P to other equipment (computer , fax machine, etc.). V erify that necessary settings have been properly configured (see the Data Features section of this manual).
GENERAL INFORMA TION AND SAFETY T emperature Environment The SX4P functions as both a radio transmitter and receiver . When it is ON, the SX4P receives and sends out radio frequency (RF) energy .
W ARRANTY I. WHA T THIS W ARRANTY COVERS AND FOR HOW LONG: TELULAR CORPORA TION ('T elular") warrants to a distributor Buyer , or to a customer only if the customer is a Buyer directly from .
IV . WHA T THIS W ARRANTY DOES NOT COVER: (a) Subsequent upgrades and enhancements to the Product. (b) Defect s, non-compliance or damage resulting from use of the Product in other than its normal and customary manner or environment. (c) Defects, noncompliance or damage from misuse, lightening, accident or neg- lect.
APPENDIX A: HOW TO SETUP PC SERIAL PORTS FOR PHONECELL DIGIT AL F AX/DA T A Requirement s · CDMA account with your network service provider including a Data/Fax facility . · PC/Laptop/ Notebook with Com Port. · Windows 95/98 · · RS-232 Cable (DB9 to DB15).
Phonecell ® SX4P 1x 17 User Manual 4) Select ‘S tandard 19200 bps Modem’ and click on ‘Properties’.. 5) Select ‘Communication’ Port (COM1) and Maximum speed of 1 15,200 bps.
Phonecell ® SX4P 1x 18 User Manual 6) Set ‘Connection Preferences’ so that the data bits is set to 8, parity is NONE and stop bit s are 1 then click ‘Advanced’. 7) Check the box for ‘Use Control Flow’ and then click on ‘Hardware (RTS/CTS) and then select ‘OK’.
8) Click on ‘OK’ 9) Click on ‘Close’. Phonecell ® SX4P 1x 19 User Manual.
10) Run ‘Dial-up Networking’. Double click the icon ‘Make New Connection’. 1 1) T ype “T elular 1xRTT on the first entry field; select the ‘S tandard 19200 modem’ and click on ‘Next’.
12) T ype the network provider ’ s phone number (#777) and click on ‘Next’ and then click on ‘Finish’. 13) Right click on the new icon ‘T elular 1xRTT’ and left click on ‘Properties’.
14) Click on ‘Server T ypes’ (DO NOT check the ‘Use Area Code and Dialing Properties). 15) Check the ‘TCP/IP’ box and click on ‘TCP/IP Settings’.
16) Now select ‘Server assigned IP address’ as well as ‘Server assigned name server address’ in addition you need to check both boxes ‘Use IP header compression’ and ‘Use default gateway on remote network’.
647 North Lakeview Parkway V ernon Hills, Illinois 60061, USA T el: 847-247-9400 • Fax: 847-247-0021 E-mail: support@telular .com http://www .telular .
Ein wichtiger Punkt beim Kauf des Geräts Telular CDMA 2000 1X (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Telular CDMA 2000 1X noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Telular CDMA 2000 1X - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Telular CDMA 2000 1X reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Telular CDMA 2000 1X erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Telular CDMA 2000 1X besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Telular CDMA 2000 1X verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Telular CDMA 2000 1X. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Telular CDMA 2000 1X gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
