Benutzeranleitung / Produktwartung USR-100 des Produzenten Telex
Zur Seite of 26
T elex Operating Instructions USR-100.
Table of Contents General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 USR-100 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Frequency Agility . . . . . . . . . . . . . .
Table of Contents (continued) SH-100 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Battery Test Button . . . . . . . . . . . .
GENERAL INFORM ATION The Telex Model USR-100 Receiver and associated Transmitters is a 100 Channel, frequency-selectable full diversity system operating within the frequency range of 668.
Posi Phase Diversity The USR-100 receiver utilizes Telex’s patented Posi Phase auto diversity circuit. Unlike other types of diversity which receive with only one antenna at a time, Posi Phase utilizes both antennas at all times. This results in a stronger signal from the microphone for cleaner audio and greater range.
Displays The 7 Segment LED channel display already mentioned (00 to 99). 2. A 5 segment LED light array for AF, that aids in setting micro - phone gains and monitoring receiver microphone and line level outputs. Light numbers 4 and 5 have a Peak Hold feature.
USR-100 Receiver Specifications RF Frequency Range . . . . . . . . . . . . . . . 668.0 to 746.0 MHz Channels . . . . . . 100 (0-99) (within TV Ch. 47/48 & 58/59) R.F. Stability . . . . . . . . . . . . . . . . . . . . . . . . 0.005% or better Modulation Type .
Model SH-100 Transmitter Specifications Frequency of operation . . . . . . . . . 668.000 to 746.000 MHz. (Current models operate in 2 frequency ranges.) 668.000 to 679.500 MHz and 734.100 to 745.500 MHz. Number of Channels . . . . . . . . 100 User Selectable Channels in each range.
Model LT-100 Transmitter Specifications Frequency of operation . . . . . . . . . 668.000 to 746.000 MHz. (Current models operate in 2 frequency ranges.) 668.000 to 679.500 MHz and 734.100 to 745.500 MHz. Number of Channels . . . . . . . . . . . . . . .
Figure 1 Front Panel Power Switch: When turned on, the channel display illuminates and one of the diversity lights will come on. Channel Select Buttons: Push once to increase display by one. Push and hold to increase display more than one. Left button changes “10’s”, Right button changes “1’s”.
Figure 2 Rear Panel Antenna Jacks: Two antenna jacks for posi phase diversity recep - tion. Attach an antenna to each jack. Audio Output: XLR type jack connects to audio sound system (Amplifier/Mixer). Pin 1 ground, Pin 2 +, Pin 3 -. Audio Adjust: Screwdriver adjustable potentiometer, controls audio output.
Receiver Set-up Connect the supplied AC power adapter to an AC outlet supplying 105 to 125 volts AC, 60 Hz. The 230 volt export model should connect to an AC outlet supplying 210-240 VAC, 50-60 Hz.
Figure 4 SH-100 Bottom View -10-.
SH-100 Power Switch: Located on the bottom of the handle. Battery Test Button: Press to check the remaining life of the batteries. Battery Meter: The number of segments that light when the Battery Test Button is pushed indicate the approximate time of battery life remaining.
Figure 5 LT-100 LT-100 Power Switch: Located on the top of the case. Battery Test Button: Press to check the remaining life of the batteries. Battery Meter: The number of segments that light when the Battery Test Button is pushed indicate the approximate time of battery life remaining.
Channel Select Switches: Control the transmit channel. Must be set to match the channel of the receiver. Microphone Gain: Controls the gain of the audio circuit to prevent under or over modulation. Transmit Power Switch: Set to high for maximum range.
System Set-Up NOTE: Whe employing two or more wireless microphones, the transmitters should be a minimum of 10-15 feet away from the receiver(s) to prevent “front-end” overload. Turn on the receiver. Set the Channel to the number desired on both the transmitter and receiver.
Remote mounting antennas will increase the effective reception range when appropriately positioned. The two 1/4 wave antennas supplied are not ground independent and therefore not appropriate for remote mounting. See the accessories section of this manual for remote- mountable antenna options.
Figure 7 Antenna Placement with Accessory Brackets and Cables If possible, do not mount the brackets on a wall. See Figure 7 for bracket and antenna placement. Antenna Connection Attach the two antenna cables to the back of the USR-100. Be sure the connectors are tightened securely.
Installing Rack Mounts The USR-100 is supplied with rack mounts for both double and single mounting in a 19" equipment rack. For single mounting, the long and short rack “ears” are used. For dual mounting, use the short “ears and the mid brackets from two USR-100’s.
Double Mounting: Align the mid brackets (Item No. 2) with the holes on the adjacent sides of each unit. Install the previously removed screws. Insert an additional screw (Item No. 4 provided in the parts pack) into the remaining holes. Tighten all screws securely.
ACCESSORIES AND REPLACEMENT PARTS Model AB-2 Combination Antenna Bracket with hardware and 10 foot (3 meter) coaxial cable TNC Connectors. Use with Model CAL-X Antennas. Order No. 71138000 AC Power Supply 120 V olt, 60 Hz Order No. 730131 1/4 Wave Replacement Antenna Part No.
Model ALP-450 450-900 MHz Directional Log Periodic Antenna includes mounting hardware and 10 foot (3 meter) coaxial cable with TNC Connectors. 9 1/2" long x 11" high. Unique forward coverage pattern increases signal gain up to 5 db. Covers all frequencies and increases range.
FCC INFORM ATION The TELEX Model USR-100 receiver is authorized under Part 15 of the Federal Communication Commission. Licensing of TELEX equip - ment is the user’s responsibility and licensability depends upon the user’s classification, and frequency selected.
CUSTOMER SERVICE INFORMATION If your receiver or transmitter should need servicing under the warranty, please contact: Customer Service Department TELEX COMMUNIC ATIONS, INC. 8601 East Cornhusker Highway, P.O. Box 5579, Lincoln, Nebraska 68505-5579 U.
TELEX COMMUNICATIONS, INC. 8601 East Cor nhusker Highway w P.O. Box 5579 w Lincoln, Nebraska 68505-5579 PN 801585-1 JUNE 1998.
Ein wichtiger Punkt beim Kauf des Geräts Telex USR-100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Telex USR-100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Telex USR-100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Telex USR-100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Telex USR-100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Telex USR-100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Telex USR-100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Telex USR-100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Telex USR-100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.