Benutzeranleitung / Produktwartung V5300 des Produzenten Tekxon Technology
Zur Seite of 35
DIGIT AL VIDEO V5300 User ’ s Manual.
2 T able of Contents 1 ． Features and S pecifications .................................................................. 3 1.1 Functions .................................................................................................... 3 1.2 T echnical S pecifications .
3 1 ． Features and Specificatio ns 1.1 Functio ns V5300 digital video camera is designed with highly integrated digital video processor and sophisticated processing algorithm. With advanced CMOS image sensor and high-resolution TFT LCD display , it has many functions and very high cost performance.
4 1.2 T echnical Sp ecifications Image sensor 5.17 mega pixels CMOS Image size 2560X1920, 2048x1536, 80 0x600 Interpolated image size 4000 × 4000, 4000 × 3000 Image quality Fine/ Normal/ Basic Color Depth 24-bit true colors (RGB) Display 2.36” TFT LCD Lens F2.
5 2 ． Appearance and A ccessories 2.1 Appear ance 1 ． Joystick and OK button 2 ． Shutter 3 ． Mode 4 ． Menu 5 ． Power 6 ． S trap holder 7 ． Microphone 8 ． S peaker 9 ． Power/ Battery charge LED 10 ． Flashlight 11 ． Lens 12 ． Audio output jack 13 ． Video output jack 14 ． USB connector 15 ． SD Card slot 16.
6 Shutter: In capture mode, take a photo or start/stop capturing a movie. In playback mode, voice recording and playback. In MP4 mode, play/stop a movie file. Microphone : Convert sound wave to electrical signal for voice recording. Flashlight : Illumination objects in dark environment for photo taking.
7 Slide the battery door downwards to open the compartment for batter y replacement. SD Card slot: Remove the SD card slot cover . Insert a card. Push the card for ejection.
8 3 ． Preparations before Use 3.1 Battery Installation Install the battery by following the step s: Open the battery cover by sliding it downwards. Place the battery into the compartment. Ensure the metal contacts of the battery are in the same orientation as the battery contacts in the battery comp artment.
9 USB port of the camera to the AC adapter or to the USB port of a PC. The charge green LED lights. It takes about 4 hours for charging, the LED goes out when charging completed.
10 3.5 Sw itch on/off the Video C amera 【 Switch on the video camera 】 Press the Power button to turn the camera on. A splash video will be displayed on the LCD. Then, the mode video recording will appear . 【 Switch off the video camera 】 Press the Power button to turn the camera off while the video camera is turned on.
11 3.6 Install the P C Camera Driver 3.6.1 Automatic installati on of Camera drivers Before connecting the digital video camera with a computer , the device driver has to be installed.
12 Click “Next”. After a window as shown in Fig. 3-1 1 appears, click “Finish” to co mplete the installation. 3.6.3 Instal l the removable driver WIN2000/XP/Vista have built in removable dr ive driver , no driver installation is required.
13 Dialog box as shown in Fig.3-14 appears, click “View” to view CD disk and locate the folder at “X: Driver Mass” (Assuming CD drive is located at X:). Click “Next” accordingly When installation finishes , the dialog box as shown in Fig.
14 4. Operation of the Video Camera 4.1 Display Icons Before reading the basic operation instru ctions, you should understand the icons on the LCD screen as shown below . Video recording displa y Camera mode d isplay Camera mode indicator Flash mode Image quality Resolution Date and Time Memor y indicator Max.
15 Playback mode display Playb ack mode indicator File protection Resolution File count / total file count Battery level File type Memor y indication Vo i c e annotation.
16 4.2 Modes of operations The video camera operates in seven modes as shown below: 1. Camera 2. Video recording 3. Playback 4. System setup 5. Audio recording 6.
17 Mode selection: The camera enters the last mode you have selected when power on . Press Mode key for mode selection. Push the joystick UP or DOWN for mode selection. Press down the joystick (OK key) to enter the selected mode. 4.2.1 Vi deo recording m ode Press the Shutter to start / stop video recording.
18 The following table lists the options for each video menu item: Video format ASF ， MOV ， WMV Resolution 720X480 ， 640X480 ， 320X240 Video quality Fine, Normal, Basic White balance Auto, Sun.
19 【 Continuous sho t s of multiple photos 】 In continuous shots mode, the camera will take 4 photos continuously by pressing the shutter button. The video camera should be kept still when multiple photos are shot continuously , Use the Menu function to set continuous shots mode.
20 F i g . 4 - 7 F i g . 4 - 8 The following table lists the options for each camera menu item. Capture Options Single shot, C ontinuous shots, Self-T imer White balance Auto, Sunny , Cloudy , Fluores.
21 Use the joystick and shutter button to control the movie playback. The following table shows the key functions: MP4 playback Play list ◄ FR (fast reverse) the movie; return to the play list when .
22 4.2.4.1 Photo playback Use ◄ key to view previous photo; use ► key to view next photo. Use ▲▼ keys to zoom in/out the current photo. 【 Display thumbnails 】 Display thumbnails of photos with the following procedures. Press MENU key and the menu screen appears.
23 4.2.4.3 V oice file Playback The display with ‘ message on the top left corner represents a voice file. Press Shutter key to start/stop voice playback.
24 【 Delete voice annotations 】 Please see “Delete Files”. 4.2.5 MP3 Play back Mode MP3 play list as shown in Fig.4-18 is displayed when MP3 playback mode is activated. Fig 4-18 shows the screen during playback. Key Operations: ▼ ▲ : Select a MP3 file in play list.
25 4.2.6 Audio recording Press Shutter key to start recording; press again to stop recording. Recorded voice file is in W A V format, and recording duration d epends on storage capacity .
26 4.2.7 System s etup The following table shows the menu items and options: Date settings Y ear/Month/Day Hour/Minute am(pm) Date/T ime Display Y ear/Month/Day/Hour/Minute Y ear/Month/Day T ime stamp.
27 4.2.8 Remov able drive mode Switch the video camera on. Connect the camera to your PC with the USB cable . The following picture will be shown on the LCD. Press the OK button to enter the DSC mode. The camera will be connected as a removable mass storage device.
28 4.2.9 PC Camera mode The video camera can act as a PC came ra when connected to your personal computer (PC) via USB. Compressed vi deo images can be displayed at real time on the PC screen and transmitted over the Internet. Switch the video camera on.
29 5. File Manageme nt Select playback mode and press MENU button to go to the Playback menu for file management functions. 5.1 Delete Files Select “Delete Current”, “Delete All” or “Delete V oice”, and press OK ke y to execute corresponding operation.
30 5.2 File Protection File protection means protecting specif ied photos or images from being deleted or voice annotations being added to or deleted. Enter the Playback menu and select , then press OK ke y for confirmation. Select LOCK or UNLOCK item, and then press OK key for confirmation.
31 6. Connection to TV Connect video and audio jack of the video camera to the video and audio input terminals of your TV with the A V cable as shown in Fig. 6-1. After connection, LCD will be turned of f, images and sound will be played on the TV set.
32 7 Additional Information 7.1 K eep the video Cam era clean Always keep the video camera clean, espec ially the lens and LCD. Do not touch the lens or you will leave fingerprint on it.
33 If the video camera is not in use fo r a long period, the battery should be removed. If AC adapter is overheated during its use, it should not be used any longer.
34 Flash does not work . z The battery has low voltage z It is set to flash off mode. z Correctly recharge the battery to full capacity z Change Flash mode Pictures are not clear . z The lens is dirty z Digit al Video Camera shakes during capture z Clean the lens according to above-mentioned requirements.
35 prior to Win 2000 and no correct driver is installed. z It is in PC camera mode. z Set to removable mass storage mode. No PC camera function z PC camera driver is not installed in the PC. z It is in Removable mass storage mode. z Install the driver correctly .
Ein wichtiger Punkt beim Kauf des Geräts Tekxon Technology V5300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tekxon Technology V5300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tekxon Technology V5300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tekxon Technology V5300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tekxon Technology V5300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tekxon Technology V5300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tekxon Technology V5300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tekxon Technology V5300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tekxon Technology V5300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
