Benutzeranleitung / Produktwartung TDS1000- and TDS2000- des Produzenten Tektronix
Zur Seite of 206
Us er Man u a l TDS 1000- and T DS2000-Serie s Digital Stor age Osc illoscope 071-1064- 00 Thi s doc ume nt s uppor t s f i r mwa r e ve r s i on FV : v1.
Copyright © T ekt ronix, Inc . All right s reserve d. T e ktroni x product s are c overe d by U.S. and fore ign pa te nts, i ss ued a nd pendi ng. Inform at ion i n thi s public at ion superc ede s that in a ll previ ously publi shed m at eri al . S pec ifi ca ti ons and price cha nge privil ege s reserve d.
W ARRANTY SUMMAR Y (TDS1000 - and TDS2000 -Series Di gital Storage Osci ll oscope) T ek tro n ix warran ts th at th e p ro d u cts th at it m an u factu res an d sells will b e free fro m defects in m.
W ARRANTY SUMMAR Y (P2200 Pr obe) T ek tro n ix w arran ts th at th e p ro d u cts th at it m an u factu res an d sells w ill b e free fro m d efects in m aterials an d w o rk m an sh ip fo r a p erio d o f o n e (1 ) y ear fro m th e d ate o f sh ip m en t.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual i T able of Conte nts Gen eral S af ety S um ma ry v ............................ Pr efa ce vii ............................................ H elp S ys tem ix ...............................
T a ble of Conte nts ii TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Acquiri ng Signal s 17 ................................... A cqu is ition M odes 17 ................................ T ime Bas e 18 ..................................
T a ble of Conte nts TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual iii Triggeri ng on a Speci fic Pulse W i dth 60 .................... Triggeri ng on a V ide o Signal 62 ........................... Triggeri ng on V ideo Fie lds 63 ....
T a ble of Conte nts iv TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual TDS 2CMA Commu nicati ons Modu le 127 .................. In s talling an d Remo vin g an Exten s ion M odul e 127 ............ Chec king Module Instal la ti on 130 ..
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual v General Safet y Sum mary Revi ew the foll owing safet y prec aut ions to a void i njury a nd preve nt dam age to t his product or any produc ts conne ct ed t o it . T o avoi d po tential hazard s , us e this pr oduct only a s speci fie d.
G ener al Saf ety S ummar y vi TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Do N ot Operate in Wet/Damp Conditions. Do N ot Operate in an Explosive A tmosphere. Keep Product Surfaces C lean and Dry . Safety T erms and Sym bols T erms in This Manual.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual vii Preface Thi s ma nual cont ai ns opera ti ng i nforma ti on for the TDS 1000-Serie s and TDS 2000-Serie s Digit al Storage Osc illos copes .
Pre f a c e viii TDS 1000/2000-Seri es Digi ta l O sc illos cope U s er M anu al H The M ath FFT cha pte r cont ai ns deta il ed i nforma ti on about how to use t he Mat h FF T func ti on.
P ref ace TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual ix Help S yst em The o s cillos cope h as a Help sy s tem w ith top ics that co ver all the featu res of th e os cillos cope.
Pre f a c e x TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Hyperlinks Mos t of t he he lp t opic s conta in phra ses marke d with a ngle brac ket s, such as <Autoset >. The se are li nks to othe r topi cs. Turn the HELP SCRO LL knob to m ove t he hi ghli ght from one l ink t o anot her .
P ref ace TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual xi Conv entions Thi s ma nual uses the foll owing c onvent ions: H Front-pane l buttons, knobs and c onnec tors a ppea r i n a ll upperc ase le tt ers. For exa mpl e: HEL P , PRIN T .
Pre f a c e xii T DS 1000/2000-Seri es Digi ta l O sc illos cope U s er M anu al Pr oduct End - of - Li f e Handl i ng Components that C ontain Mercury . T he col d cat hode fluore scent t ube loc at ed i n the li quid c rystal displa y bac kli ght c onta ins tra ce am ounts of me rcury .
P ref ace TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual xiii Conta cting T e ktronix Phone 1-800-833-9200 * Address T ekt ronix, Inc . Depart me nt or na me (if known) 14200 SW Karl Bra un Drive P .O. Box 500 Bea vert on, OR 97077 USA Web s i te ww w .
Pre f a c e xiv T DS 1000/2000-Seri es Digi ta l O sc illos cope U s er M anu al.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 1 G etti ng Sta rte d TDS1000-S eri es a nd T DS 2000-Serie s Digit al Storage Osc illos copes are s mall, lightw eight, ben chto p pack ages that yo u can us e to tak e ground-refe renc ed m ea sureme nts.
G etting S tarted 2 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Gene ral Fea tures The n ext tab le and bulleted list d es crib e the g ener al featu res . Model Channels B andwidth Sample rate Dis pl ay TDS1002 2 60 MHz 1.0 GS/s Monoc hrome TDS1012 2 100 MHz 1.
G etting S tarted TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 3 H D ual time b as e H Math Fast F ourie r T ransform (FF T) H P uls e W idth trig ger cap ability H V ideo trig ger cap.
G etting S tarted 4 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Insta llation Power Cord Us e onl y power cords designe d for your osc illos cope. U se a po wer source t hat del ive rs 90 to 264 V AC RM S , 45 to 66 Hz. If you have a 400 Hz power source, it must de li ver 90 t o 132 V AC RM S , 360 to 440 Hz.
G etting S tarted TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 5 Functiona l Che ck Perform t his quic k funct iona l c hec k to ve rify t hat your osc illos c op e is op eratin g corr ectly . PASSED ON / OFF bu tton 1. P ow er on the os cillos cop e.
G etting S tarted 6 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Pr obe Safety A guard around t he probe body provide s a finge r barri er for prote ct ion from el ec tri c shock. Finger guard W ARNI NG. T o avoid electr ic s hock wh en us ing the pr o be, keep fing er s behi nd the guar d on t he pr obe body .
G etting S tarted TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 7 Pr obe Che ck Wiza rd Y ou ca n use the Probe Chec k W i za rd to qui ckl y veri fy that your probe i s operat ing prope rly .
G etting S tarted 8 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Manual Pr obe Com pens ation As a n al te rnat ive me thod t o Probe Chec k, you c an m anua ll y perform thi s adjustm ent to m at ch your probe to t he i nput c hanne l.
G etting S tarted TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 9 Pr obe Atte nuation Setting Probes are ava il abl e w it h va rious a tt enua ti on fa ct ors which af fec t the vert ic al sca le of the signa l. T he Probe Check funct ion veri fie s tha t the P rob e attenu ation optio n match es the attenu ation of the p rob e.
G etting S tarted 10 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Self Ca libration The s elf calibr ation rou tine lets yo u o ptimize th e os cillos cop e s ign al path f or max imum meas ur ement accur acy .
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 11 Understanding Oscilloscope Functions Thi s chapt er c onta ins inform at ion on what you nee d to unde rstand bef or e you u s e an os cillos cope.
U nd ers tandin g O s cillos cope F unctio ns 12 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Setting Up the Osc illosc ope Y ou should bec ome fa miliar with th ree fu nctio ns that yo u may us e ofte n when opera ti ng your osc illos cope: A utos et, sav ing a setu p, an d recallin g a setu p.
U nd ers tandin g O s cillos cope F un ctions TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 13 Default Setup The os cillos cop e is s et up fo r no rmal op eratio n w hen it is s hipp ed fr om the factor y . This is the defau lt setu p.
U nd ers tandin g O s cillos cope F unctio ns 14 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Whe n you push the RUN/ST OP or SING LE SEQ buttons to sta rt a n acqu is ition , the o s cillos cope g oes thr ough the fol lowing ste ps: 1.
U nd ers tandin g O s cillos cope F un ctions TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 15 T ypes The o s cillos cope p ro vid es three ty pes of trigg ers : Edge, V ideo , and P uls e W idth.
U nd ers tandin g O s cillos cope F unctio ns 16 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Position The h or izon tal po s ition contr ol es tablis hes the time b etw een the trig ger an d the s creen cen ter .
U nd ers tandin g O s cillos cope F un ctions TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 17 Ac quiring S ignals When you acquir e a s ign al, the o s cillos cope c onvert s it int o a digi ta l fo rm an d d is play s a wav efo rm.
U nd ers tandin g O s cillos cope F unctio ns 18 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T ime Bas e The o s cillos cope d igitizes w avef or ms by acq uir ing th e value o f an input signa l at di scret e point s. The time bas e allow s y ou to co ntr ol how ofte n the val ues are digi ti ze d.
U nd ers tandin g O s cillos cope F un ctions TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 19 Horizontal Scal e and Position; Pretr igger I nfor mation Y o u c a n a dj u st t he HORI Z ONT AL POSI T ION c on t ro l t o v i e w w avef or m data b efo re th e trig ger , after the trig ger , or so me of each.
U nd ers tandin g O s cillos cope F unctio ns 20 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T ime Domain A liasing. A lias ing occu rs w hen the oscillo scop e do es not sampl e t he signa l fa st enough t o construc t a n ac cura te waveform reco rd .
U nd ers tandin g O s cillos cope F un ctions TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 21 O s cillos cope mod els w ith 60 M H z or 10 0 M Hz ban dwid th sample at rates up to 1 G S/s . M odels w ith 20 0 M Hz ban dwid th sample at rates up to 2 G S/s .
U nd ers tandin g O s cillos cope F unctio ns 22 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual The n ext tab le lis ts the time bas es th at yo u s houl d use to a void al ia sing at vari ous freque nci es and the respec ti ve sampl e rat e.
U nd ers tandin g O s cillos cope F un ctions TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 23 Settings to avoid aliasing in Sample mode (Cont.) T ime base (SEC/D IV) Samples per second Maximum frequency component 1.0 ms 250.0 kS/s 125.
U nd ers tandin g O s cillos cope F unctio ns 24 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T aki ng M easu r ement s The o s cillos cope d is play s grap hs of voltage v ers us time and can help you to m ea sure the displa yed wave form.
U nd ers tandin g O s cillos cope F un ctions TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 25 Cursor s This metho d allow s yo u to take meas ur ements by mo vin g the cursors, which a lways appe ar i n pai rs, and re adi ng the ir num eri c val ues from the displa y readout s.
U nd ers tandin g O s cillos cope F unctio ns 26 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 27 Operatin g Basics The front pa nel i s divi ded int o easy-to-use funct iona l are as. Thi s cha pte r provide s you w it h a qui ck ove rvie w of the c ontrol s and the inform at ion displa yed on the scree n.
O per ating B as ics 28 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Dis play A rea In ad ditio n to dis playin g w avef or ms , the dis play is filled w ith many det ai ls about the wave form and the osc illos cop e contr ol settin gs.
O per ating B as ics TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 29 2. T rig ger s tatus in dicates th e follo w ing: Armed. The o s cillos cope is acqu irin g p retr igg er d ata. A ll tri ggers a re ignored in t his sta te . R Ready .
O per ating B as ics 30 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 7. A n arro w icon ind icates that the wav efo rm is inver ted. 8. Rea douts s how the ve rti ca l scal e fac tors of the c hanne ls. 9. AB W icon ind icates that the chann el is band wid th limited.
O per ating B as ics TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 31 Message Area The o s cillos cope d is play s a mess age area ( item nu mber 15 in the previ ous figure ) at the bot.
O per ating B as ics 32 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Us ing the Menu Sys tem The user int erfa ce of TDS1000- and TDS2000-s eri es osc illos cop es w as d es ign ed fo r eas y acces s to s pecialized fu nctio ns thr ough the me nu struct ure.
O per ating B as ics TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 33 H A ction : The o s cillos cope d is play s the typ e of action that w ill immediately o ccur w hen yo u pu s h an A ction o ptio n bu tton .
O per ating B as ics 34 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual V ertical C ontrols All m odels CH 1, CH 2, CH 3 , CH 4 , CURS OR 1 a nd CURSOR 2 P OSI TI ON.
O per ating B as ics TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 35 Horizontal C ontrols 2-channel models 4-channel model s POSITIO N. Ad jus ts th e ho rizo ntal p os ition o f all ch ann el and math w avef or ms . The r es olu tion of th is contr ol var ies w ith the time b as e sett ing.
O per ating B as ics 36 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual HORIZ M ENU. Displays t he H oriz onta l M enu. SET T O ZER O. Sets the ho rizo ntal po s ition to zer o. SEC/D IV . S elects the ho rizo ntal time/d iv ( s cale facto r) for the main o r the window time bas e.
O per ating B as ics TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 37 USER SELEC T Description Holdof f Sets the am ount of tim e before another trigger ev ent can be acc epted; refer t.
O per ating B as ics 38 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Menu and C ontrol Buttons All m odels SA VE/R ECA LL. D is play s the Sav e/Recall Men u for s etup s and waveform s. M EAS URE. D ispla ys the aut oma te d m ea sureme nts m enu.
O per ating B as ics TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 39 Conne ctors 2-channel models 4-channel models PROBE COM P . V ol ta ge probe com pensat ion output a nd ground. U se to electrically match the p ro be to the os cillos cop e i nput ci rcui t.
O per ating B as ics 40 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 41 App licatio n Examp les This s ection pres ents a ser ies of app lication examp les . Thes e s implif ied ex amples hig hlig ht th e featur es of the os cillos cope and give you ide as for using it to solve your own test probl em s.
A pp lication Ex amples 42 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T aki ng S imp le M easu r ement s Y ou nee d to see a signa l i n a c irc uit , but you do not know the am pli tude or freque ncy of t he signa l.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 43 3. Connec t the c hanne l 1 probe to the signal . 4. Push t h e AUTO SET but ton. The o s cillos cope s ets th e ver tical, ho rizo ntal, an d tr igg er co ntr ols auto matically .
A pp lication Ex amples 44 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 3. Push t h e Ty p e optio n bu tton an d s elect Freq . The Va l u e re adout di splays the me asurem ent a nd update s.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 45 11 . P us h the seco nd o ptio n bu tton f ro m the bottom; the M easur e 4 Menu appe ars. 12. Push t h e Ty p e optio n bu tton an d s elect Ri se Ti me . The Va l u e re adout di splays the me asurem ent a nd update s.
A pp lication Ex amples 46 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Measuring T wo Si gnals Y ou are te sting a pie ce of equi pme nt a nd nee d to m ea sure the gai n of the aud io amplif ier . Y ou h ave an aud io gen erato r that can inject a test signal a t the a mpl ifi er input .
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 47 T o a ct iva te and di splay t he signa ls conne ct ed t o cha nnel 1 and t o cha nnel 2, follow t hese s te ps: 1. If the cha nnel s are not di splaye d, push the CH 1 M ENU and CH 2 M E NU butt ons.
A pp lication Ex amples 48 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T aki ng Cu r sor M easu r ement s Y ou can us e th e curs ors to qu ickly tak e time an d vo ltage measu re- me nts on a wave form. Measuring Ri ng Frequency T o me asure the ri ng frequenc y at the ri sing edge of a s igna l, fol low thes e step s : 1.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 49 Measuring Ri ng Ampl itude Y ou me asured t he ri ng freque ncy i n the previ ous exam ple . Now you want to me asure the a mpl it ude of the ringi ng. T o me asure the am pli tude , follow t hese s te ps: 1.
A pp lication Ex amples 50 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Measuring Pul se Wi dth Y ou are ana lyz ing a pulse wave form, and you want to know the w idth of th e pu ls e. T o meas ure th e wid th of a puls e usin g the time c ur sor s, fo l l ow t h e se st e ps: 1.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 51 NOTE . T he Po s itive W idth m eas ur em ent is availa ble a s an a uto ma tic measur ement in t he Me asur e Me nu, de scribed on page 94.
A pp lication Ex amples 52 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 2. Tur n t he VO L T S / D I V and VERTICAL P O SIT IO N knobs to s et the wave form am pli tude t o about five di visions. 3. Push t h e CH 1 M ENU butto n to s ee the CH 1 M enu if it is n ot displa yed.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 53 10. Tur n t he CURSO R 2 knob to pl ac e t he sec ond cursor at the point where the wave form crosses the sec ond grati cul e li ne above ce nte r scree n. T his is the 90% le vel of the waveform .
A pp lication Ex amples 54 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Ana lyzing Signal D eta il Y ou hav e a n ois y sig nal dis played o n the os cillos cop e and yo u need to know more a bout it . Y ou s uspect t hat t he signal c onta ins much more det ai l t han you c an now see i n the displa y .
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 55 Separat ing the Signal from Noise Now you want to ana lyz e the signa l shape and ignore t he noise. T o reduc e random noi se in the osc illos cope d is play , follo w thes e s teps : 1.
A pp lication Ex amples 56 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Ca pturing a Single - Shot S ignal The reliab ility of a reed r elay in a piece of equ ipmen t has b een poor and you ne ed t o inve stiga te the proble m. Y ou sus pec t t hat the rel ay cont ac ts arc when the rel ay ope ns.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 57 Op t imizin g t he A cq uis it ion The initial acqu is ition s how s the relay co ntact beg inn ing to o pen at the t rigge r point. T his is foll owed by a la r ge spike tha t indi ca te s cont ac t bounce a nd induct anc e in the c irc uit .
A pp lication Ex amples 58 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Measur ing P ropagation Delay Y ou s us pect that the memory timin g in a microp ro ces s or cir cuit is mar ginal.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 59 T o set up to m ea sure propaga ti on del ay , foll ow these ste ps: 1. If the cha nnel s are not di splaye d, push the CH 1 M ENU a nd the n CH 2 M E NU butt ons.
A pp lication Ex amples 60 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T riggering on a Spec ific Pulse Width Y ou are te sting the pul se w idt hs of a s igna l in a ci rcui t. It i s cri ti ca l that the pu ls es all be a sp ecific w idth an d yo u need to v erif y that they are .
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 61 6. Push t h e So urc e op tion b utto n to s elect CH 1 . 7. Tur n t he TRIGGER LEVEL knob t o set the t rigge r leve l ne ar the bot tom of the signa l. 8. Push t h e When optio n bu tton to s elect = (equal ).
A pp lication Ex amples 62 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T riggering on a Vide o Signal Y ou are te sting t he vi deo c irc uit in a pie ce of me dic al equi pme nt a nd nee d to di splay t he vi deo out put signa l. The vide o output is an NTSC standa rd signal .
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 63 NOTE . Mos t vid eo s ys tem s u s e 75 ohm cab ling. Th e os cillos c op e input s do not pr operly t erminate l ow impedance c abli ng.
A pp lication Ex amples 64 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T riggering on V ideo Li nes Automatic. Y ou can als o look at the vid eo lines in the field . T o trigg er on th e video lin es , follo w th es e step s : 1. Push t h e AUTO SET but ton.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 65 CH 1 Incom ing video signal 75 Ω term inator.
A pp lication Ex amples 66 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Using the Wi ndow Function to See W avefor m Detail s Y ou ca n use the window functi on to e xam ine a spec ifi c port ion of a waveform without cha nging t he m ai n displa y .
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 67 5. Push t h e Wi nd o w opti on butt on to see the expa nded port ion of the w avefo rm. 6. Tur n t he SE C/ DIV knob to op timize view ing the exp and ed waveform .
A pp lication Ex amples 68 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Ana lyzing a Diffe rential C omm unica tion Signal Y ou are hav ing in termitten t pro blems w ith a ser ial data commun ica- ti on li nk, a nd you sus pec t poor signa l qua lity .
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 69 NOTE . Be s ur e to firs t co m pen s ate bo th pr o bes . D iffer ences in pr obe compensati on appe ar as err ors in the d iffer en tial s i gnal . T o a ct iva te the different ia l signa ls conne ct ed t o cha nnel 1 and cha nnel 2, follow t hese s te ps: 1.
A pp lication Ex amples 70 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual For a more sta ble di splay , push the SING LE SE Q but ton t o cont rol the acqu is ition o f the w avef or m. Each time y ou p us h the SINGL E SEQ butto n, th e os cillos cop e acqu ires a sn apsh ot of th e digital data s tream.
A pp lication Ex amples TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 71 CH 1 CH 2 Circuit In O ut.
A pp lication Ex amples 72 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T o vi ew the input and out put of t he c irc uit in a n XY di splay , foll ow thes e step s : 1. Push t h e CH 1 M ENU but ton a nd set t he P rob e op tion attenu ation to 10X .
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 73 Referen ce This ch apter des cribes th e menus an d oper ating details as so ciated with each fr on t-p anel menu b utto n or co ntr ol.
Refe renc e 74 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Ac quire P us h the AC Q U IR E butto n to s et acquis ition par ameters . Options Settings Comments Sa mple U se to ac quir.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 75 Sample. U s e S ample acq uis ition mo de to acquir e 2500 poi nts a nd dis play th em at the S EC/D IV s etting . S ample mo de is the d efau lt mode . 12 3456 789 1 0 Sample acquisit ion intervals (2500) Sample m ode acquires a single sample point in each int erval.
Refe renc e 76 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Peak Detect. Us e P eak Detect acqu is ition mo de to detect glitch es as nar ro w as 10 n s an d to limit the pos sib ility of alias ing. This mode is ef fective w hen at the S EC/D IV s etting of 5 s/d i v or sl o we r .
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 77 Whe n the re i s enough waveform noise, a t ypic al pea k det ec t di splay show s large bla ck a rea s. The TDS1000- and TDS2000-s eri es os cillos cop es dis play this area with dia gonal line s to improve displa y perform anc e.
Refe renc e 78 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Acquisition mode SING LE SEQ button Sa mple , P ea k D et ect Sequence i s c ompl ete when one acquis iti on is ac quired A verage Sequenc e is compl ete when the defined number of acqui si tions is reac hed (refer to page 74) Scan Mode Display .
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 79 Autos et When y ou p us h the AU TO SET bu tton , the os cillos cope iden tifies the type of waveform a nd adjusts control s to produce a usabl e displa y of the i nput signal .
Refe renc e 80 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual The Autoset functi on e xam ine s al l channe ls for s igna ls a nd di splays corre sponding waveform s.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 81 Sine Wave When y ou u s e the Au tos et f unctio n and the os cillosco pe determines that th e s ign al is similar to a s in.
Refe renc e 82 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Square W ave or Pulse When y ou u s e the Au tos et f un ction an d the os cillos cope deter mines that th e s ign al is sim.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 83 V ideo Si gnal When y ou u s e the Au tos et f unctio n and the os cillosco pe determines that th e s ign al is a video sig .
Refe renc e 84 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Cursors P us h the CU RS OR b utto n to dis play the meas ur ement cur s or s an d Cursor M enu.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 85 NOTE . T he o s cillos cope m us t dis play a wavefo rm for the cu rs ors an d cursor r eadout s to appear . Key Points Cursor Movement. Us e t he CURSO R 1 and CURSO R 2 knobs to move cursors 1 and 2.
Refe renc e 86 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Dis play Pus h the DIS PLA Y button t o choose how waveform s are pre sente d and to cha nge the a ppea ranc e of the ent ire di splay .
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 87 Dependi ng on the type , wave forms will be di splaye d in t hree dif fer ent s tyles : s olid , dimmed , and bro ken . 1 2 3 1. A solid waveform i ndic at es a channe l (li ve) waveform di splay .
Refe renc e 88 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 2. For the T DS 1000-serie s (monoc hrome m onit or), a d immed waveform indi ca te s refe renc e w ave forms or w ave forms wit h persiste nce a ppli ed.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 89 NOTE . Th e os cillos cope can ca ptu r e a wavefo r m in n or ma l YT mo de at any sam pli ng rate. Y ou can v ie w the sam e wav ef orm i n XY mode. T o do s o, s top th e acqu is ition a nd c hange the display f orm at to XY .
Refe renc e 90 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Horizontal Y ou can use the horiz onta l cont rols to change the hori zont al sca le and p os ition of w avefo rms . Th e hor izon tal pos ition rea dout show s the time r epr es ented by th e center of th e s creen , us ing th e time of the tri gger as zero.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 91 NOTE . Y ou c an push the horizontal opti on butt ons to switch be twe en an ent ir e wav ef orm di splay and an e nlar ged, mor e de tai le d part of i t. The a xis for vert ic al sca le i s the ground le vel .
Refe renc e 92 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Scan Mode Display (Roll Mode). When the S EC/D IV co ntro l is s et to 100 ms/di v or slower and t he t rigge r mode is set t o Auto, t he os cillos cop e enters the s can acqu is ition mo de.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 93 Ma th P us h the MA TH M ENU bu tton to d is play th e wav efo rm math opera ti ons. Pus h the MA T H M ENU button a gai n to re move the ma th waveform di splay . Re fer to page 1 12 for verti ca l sys te m descri pti ons.
Refe renc e 94 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual M easur e P us h the MEA SU RE butto n to acces s au tomatic meas ur ements . Ther e are eleven typ es o f meas ur ements availab le. Y ou can d is play up to f ive at a time.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 95 Measurement type Definition Mean C alc ulates the arithmeti c m ean vol tage over the entire rec ord Pk-Pk Calc ulates the a.
Refe renc e 96 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Pr int Pus h the PRIN T but ton t o send the scree n dat a t o a pri nte r or comp uter . The pri nt funct ion requi res the opti onal T DS 2CMA Com muni ca ti ons Ext ension Module.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 97 S ave/Recal l P us h the SA V E/REC A LL butto n to s ave or r ecall os cillos cope s etup s or waveform s.
Refe renc e 98 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Wavef orms Options Settings Comments Wa ve f o r m s Highli ghting W aveform s dis play s the men u fo r sto rin g or r eca .
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 99 T rigger Controls Y ou ca n defi ne t he t rigge r through t he Trigge r Menu and front -pane l cont rols. T rigger T ypes Thre e t ypes of tri ggeri ng are ava il abl e: Edge , V ide o, a nd Pulse W i dth.
Refe renc e 100 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Edge T rigger U s e Edg e trig ger ing to trig ger o n the edg e of the o scillos cope i nput signal a t the t rigge r threshold.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 101 T rigger Frequency Readout The o s cillos cope c ounts the rat e at which t rigge r e vent s occ ur t o det erm ine tri gger fre quenc y and di splays the freque ncy i n the lower right corne r of the scree n.
Refe renc e 102 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Source Options. Source option D etails Numbered chan- nels T riggers on a channel whether or not the waveform i s disp laye.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 103 Coupling. Cou plin g allow s yo u to filter th e trigg er s ignal us ed to tri gger a n ac quisit ion.
Refe renc e 104 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual V ideo T rigger Options Settings Comments V ideo Wi th V ideo hi ghli ghted, triggeri ng occurs on an NTSC , P AL, or SECAM.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 105 Pu lse Wid t h T rig ge r Us e Pulse W idt h tri ggeri ng to t rigge r on abe rrant pulses.
Refe renc e 106 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual T rigger Frequency Readout The o s cillos cope c ounts the rat e at which t rigge r e vent s occ ur t o det erm ine tri gger fre quenc y and di splays the freque ncy i n the lower rig ht cor ner o f the s creen .
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 107 Knobs and Butt ons LEVEL or USER SELEC T Knob. U se to cont rol the Trigge r Leve l, Trigger Holdoff, V ideo L ine Number or Pulse W idt h. T he pri ma ry funct ion of t his knob is to set the tri gger l eve l.
Refe renc e 108 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual FOR CE TR IG B utton. Us e the FORCE TRIG butt on to compl et e the cur ren t w avef or m acqu is ition wh ether o r no t the os cillos cope detects a trigge r . This i s useful for SIN GLE SEQ acqui siti ons and Normal trig ger mo de.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 109 Holdoff. Y ou c an use t he Trigge r Holdof f funct ion t o produce a sta ble displa y of com ple x waveform s, such as pulse t rai ns. Holdof f is the time betw een w hen th e os cillos cope detects one trig ger and w hen it is ready to detect an oth er .
Refe renc e 11 0 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Utility P us h the UTI LITY bu tton to d is play th e Utility M enu. The U tility M enu ch ang es w ith the additio n of a TD S 2C M A ex tens ion m odule . Refe r to t he ne xt sec ti on for inform at ion on t he e xte nsion modul e.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 111 Key Points Self Calibration. The s elf calib ratio n r ou tine o ptimizes the os cillos cope accur acy fo r the ambien t temperatu re. F or max imum accur acy , yo u should perform a self ca l if the a mbi ent t em pera ture c hange s by 5 ° C or more.
Refe renc e 11 2 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual V er ti cal Y ou ca n use the vert ic al cont rols to di splay wave forms, a djust vert ic al sca le a nd pos it ion, a nd s et i nput para me te rs. Refer to page 93 for the vert ic al ma th de script ions.
Refe renc e TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 11 3 NOTE . T he o s cillos cope ver tical r es ponse r oll s off slowl y above i ts bandwidt h (60 MHz , 100 MHz, or 200 MH z, depe nding on t he model , or 20 MH z when the Bandwi dth Limit opti on is set t o On).
Refe renc e 11 4 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual U in Level and D elta Readouts. V ertical s ens itivity s hould m at ch on waveform s us ed for m at h opera ti ons.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 11 5 Ma th FFT Thi s chapt er c onta ins det ai le d inform at ion on how to use t he Mat h FF T (Fast Fourie r Transform). Y ou c an use t he FFT Math m ode t o conve rt a time-d omain ( Y T) s ignal into its fr equency co m ponent s (spect rum).
Ma t h FFT 11 6 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Setting Up the T ime -D omain W avefor m Bef or e you u s e FF T mo de, yo u need to s et u p the time-do main (Y T) waveform . T o do so, foll ow these ste ps: 1. Push AUTO SET t o displa y a YT wave form.
Ma t h FFT TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 11 7 T o se t u p t he FFT d i spl a y , f ol l o w th e se st e p s: 1. Pus h t he M A TH MENU butt on. 2. S et the Op eratio n op tion to F FT . 3. Se l e c t t he Ma t h FFT Sou rc e c h a nn e l .
Ma t h FFT 11 8 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Normal ly , the displa y com presses the FFT spect rum hori zont al ly i nto 250 point s, but you c an use t he FFT Zoom funct ion t o expa nd the FF T spec trum to m ore c le arl y see t he fre quenc y com ponent s at each of the 1024 data poi nts in the FF T spect rum.
Ma t h FFT TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 11 9 Math FFT option Settings Comments Source CH1 CH2 CH3 * CH4 * Selec ts the c hannel us ed as the FFT sourc e Window Hanning .
Ma t h FFT 120 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Selec ting an FFT Window W i ndows re duce spec tra l le aka ge in the FFT s pec trum . The FFT assumes t hat the YT wave form repea ts fore ver . W i th an i nte gral nu mber of cy cles (1, 2 , 3, .
Ma t h FFT TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 121 Applying a window to the YT waveform c hange s the wave form so that the s tart and s top valu es ar e clos e to each other , redu cing th e dis contin uities .
Ma t h FFT 122 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual The Mat h F FT functi on incl udes three FFT W indow options. The re is a trade- of f betw een freq uen cy res olutio n and amp litud e accuracy w ith each typ e of w i ndow .
Ma t h FFT TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 123 Nyquist frequency (one-half sample rate) Frequency Am plitude Aliased frequencies Actual frequencies Elimin at ing Ali ases T o eliminate alias es , try the fo llow ing remed ies : H Turn the SEC/ DIV knob to set the sam ple ra te t o a faster se tting.
Ma t h FFT 124 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual H If you do not ne ed t o vie w frequenc ie s compone nts above 20 M H z, set the Ban dw idth Limit optio n to O n. H P ut an exter nal filter o n the s ou rce s ign al to band w idth limit the source waveform t o frequenc ie s bel ow tha t of the Nyquist freque ncy .
Ma t h FFT TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 125 Whe n you cha nge the z oom fac tor , t he FF T spect rum is magni fie d about the ce nte r grat ic ule li ne. In othe r words , t he a xis of horiz onta l magn ificatio n is the cen ter g raticu le line.
Ma t h FFT 126 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual M easur i ng an F FT S p ectr u m Using Cu r sor s Y ou ca n ta ke t wo mea sureme nts on FF T spec trum s: magni tude (in dB) a nd freque ncy (i n Hz). Magni tude is refe renc ed t o 0 dB, where 0 dB e qual s 1 V RMS .
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 127 TDS 2C MA C ommunic ati ons Modul e Thi s cha pte r de scribe s how to us e the TDS 2CMA Communi ca ti ons Ext ension Module (opti onal ) with a TDS1000- or TDS 2000-serie s os cillos cop e.
TDS2CM A Comm unic at ions Module 128 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual CAUTION. E le ct r ostat ic di schar ge (E SD) can damage components in the module and the osc illos cop e. T o pr even t ESD , follow the next lis t of pr ec auti ons when instal li ng, r emovi ng, or handli ng an module.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 129 Removi ng an Extension Modul e T o re move an e xte nsion modul e, refe r to t he ne xt illus tration an d foll ow the previ ous prec aut ions.
TDS2CM A Comm unic at ions Module 130 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Che ck ing M odule Insta llation T o c hec k tha t t he m odule is corre ct ly i nstal le d, power on t he os cillos cop e. The pow er -o n s creen s houl d l ist the TDS2CM A m odule and inc lude t he me ss age “ Po we r-up T e st s Pa sse d.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 131 Sending Screen D ata to an Exte rnal De vic e The TDS2CM A module le ts you send scree n dat a t o an e xte rnal devi ce , such as a cont roll er , pri nte r , or comput er .
TDS2CM A Comm unic at ions Module 132 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Opt io n Settings Comments Layout Portrai t, Landsc ape Printer output ori entation Format Thi nkj et.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 133 T esting the Printer Port T o tes t the pr inter por t, fo llow thes e step s : 1. If you have al rea dy conne ct ed t he osc illosco pe to a pr inter , go to st e p 4.
TDS2CM A Comm unic at ions Module 134 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Setting Up a nd T es ting the R S -2 32 Interfac e Y ou ma y nee d to set up and t est t he m odule RS-232 inte rfac e.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 135 Connecting an Exter nal Devi ce Whe n you conne ct the modul e t o an e xte rnal RS-232 devic e, foll ow the se guidel ine s: H Us e the c orrec t ca ble (re fer to the t abl e on page 134).
TDS2CM A Comm unic at ions Module 136 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual RS-232 Set tings T o s et up the os cillos cop e RS -2 32 in terf ace, follo w th es e step s: 1. Push UT ILIT Y " Options " RS -232 . 2. Pus h the opti on butt ons to ma tc h the sett ings of your ext erna l devi ce .
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 137 T esting the RS- 232 Interf ace T o tes t the os cillos cop e RS -23 2 in terf ace, fo llow thes e step s : 1. Co nn ect the o s cillos cope to a pers onal co mpu ter ( P C) us ing an appropri at e RS-232 ca ble (re fer to the t abl e on page 134).
TDS2CM A Comm unic at ions Module 138 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual CH 1 PR OBE C OM P 6. O n the os cillos cop e, pus h UT ILIT Y " Options " RS-232 . 7. Ch eck that the menu s ettings match tho s e listed in th e table on page 137.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 139 NOTE . F or br ie f i nformation on c omm and ent ry , r ef er to page 150. For c omplet e comm and i nformation, r e fe r to the pr ogram mer manual that came wi th y our ext ension module .
TDS2CM A Comm unic at ions Module 140 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 2. Ch eck that yo u are us ing the cor rect RS -23 2 cable. D etermin e whethe r your ext erna l de vic e re quire s a null -mode m or a strai ght-t hrough conne ct ion.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 141 7. If y ou r eceive on ly par t of the pr inter f ile, try thes e r emedies : a. Leng then the timeou t fo r th e exter nal d evice b. M ake s ure th e pr inter is s et to receiv e a bin ary file, no t a text f ile.
TDS2CM A Comm unic at ions Module 142 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Checking Com mand Status If you want t o che ck t he sta tus of ea ch c omm and sent , you c an appe nd an *STB? query a fte r eve ry com ma nd and re ad t he re spons e string.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 143 1 No connection 2 Receive data (RxD) (input) 3 Transmit dat a (T xD) (output ) 4 Data term inal ready.
TDS2CM A Comm unic at ions Module 144 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual H Connec t the osc illos cop e to th e G P IB netwo rk. U se an ap prop ri- at e GPIB cabl e. Y ou ca n stac k ca ble conne ct ors. The next ta ble li sts cabl es tha t you c an orde r to c onnec t t he osc illos cop e to the GP IB net work.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 145 2. O n the os cillos cop e, pus h UT ILIT Y " Options " GPI B Set up . 3. Push t h e Addre ss opt ion but ton t o assign a uni que a ddress to the os cillos cop e.
TDS2CM A Comm unic at ions Module 146 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual The fo llow ing pr oced ur e verif ies co mmun ication w ith the os cillo- scope by a cqui ring a signal and re turni ng a vol ta ge m ea sureme nt.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 147 2. In th e contr oller s oftw are, sen d the ID ? command to the os cillos cop e. The o s cillos cope s houl d send bac k it s ident ifi ca ti on string whic h looks s imilar to th e follo w ing : ID TEK/TDS 1002,CF:91.
TDS2CM A Comm unic at ions Module 148 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual GPIB Network Convent ions T o ac hie ve a high dat a tra nsfer rate , the physic al di stanc e bet ween dev ices and the numb er of devices o n the bus ar e limited.
TDS2CM A Comm unic at ions Module TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 149 H A max imum s epar ation o f 13 .2 feet (4 meter s ) betw een any tw o devi ce s and an a vera ge sepa rat ion of 6. 6 fee t (2 m et ers) over t he ent ire bus.
TDS2CM A Comm unic at ions Module 150 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Comman d E nt r y When y ou en ter os cillos cop e command s o ver th e RS- 232 or G P IB bus, fol low t hese genera l rules: H Y ou ca n ent er c omm ands in uppe r or lower c ase.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 151 Appe ndix A : Spec ifi ca tions All spec ifi ca ti ons apply t o the TDS1000- and TDS2000-s eri es os cillos cop es . P 2200 probe spec ifi ca ti ons appea r at the end of t his chap ter .
Appendix A: Spec ifi ca ti ons 152 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Os cillo sc op e Sp ec if ica t ion s ( Cont.) Inputs Input Coupling DC, AC, o r GND Input Impedanc e, D.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 153 Os cillo sc op e Sp ec if ica t ion s ( Cont.) Inputs Channel - to - Channel C ommo n Mod e R j i i l TD.
Appendix A: Spec ifi ca ti ons 154 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Os cillo sc op e Sp ec if ica t ion s ( Cont.) V ertical Analog Bandwidth i n Sampl e and A verage modes.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 155 Os cillo sc op e Sp ec if ica t ion s ( Cont.) V ertical D C G a in Accu ra cy ± 3% for Sampl e or A ve.
Appendix A: Spec ifi ca ti ons 156 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Os cillo sc op e Sp ec if ica t ion s ( Cont.) Horizontal Sampl e Rate R ange TDS1002, TD S1012, TDS2002.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 157 Os cillo sc op e Sp ec if ica t ion s ( Cont.) T rigger T rigger Sens iti vi ty , E d T i T Coupling Sen sitivit y g g y , Edge T rigger T ype DC CH1 , CH2, CH3, CH4 1 div from DC to 10 MHz * , 1.
Appendix A: Spec ifi ca ti ons 158 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Os cillo sc op e Sp ec if ica t ion s ( Cont.) T rigger T rigger Level Ac curac y , i l Acc uraci es are for s ignal s hav ing ri se and fal l tim es ≥ 20 ns g g y , typi cal Sourc e Accu ra cy Internal ± 0.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 159 Os cillo sc op e Sp ec if ica t ion s ( Cont.) Pulse Width T rigger Puls e Width T rigger modes T rigger.
Appendix A: Spec ifi ca ti ons 160 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Os cillo sc op e Sp ec if ica t ion s ( Cont.) T rigger Frequency Counter Readout R esol ution 6 dig its.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 161 Os cillo sc op e Sp ec if ica t ion s ( Cont.) Measurements Cur s or s V oltage di f ference between cur.
Appendix A: Spec ifi ca ti ons 162 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Os cillo sc op e Ge ne r al Sp ec if ica t ion s ( Cont.) Environmental T emperature Operating 32 ° F - 122 ° F (0 ° Ct o+ 5 0 ° C) Nonoperating -- 4 0 ° F - 159.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 163 Oscilloscope EMC C ertifications and Compliances European Union Meets the intent of D irec tiv e 89/336/EEC for Elec tromagneti c Compatib ility .
Appendix A: Spec ifi ca ti ons 164 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Oscilloscope EMC C ertifications and Compliances (C ont.) Au str alia /N e w Zealand Meets the intent of Austral ian EM C Framework as dem onstrated to the foll owing spec ifi cati on: AS/NZS 2064.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 165 P2200 Probe Specifications Electrical characteristics 10X position 1X position Bandwidth DC to 200 MHz D.
Appendix A: Spec ifi ca ti ons 166 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual P2200 Probe Specifications (Cont.) Cert ifications and Com pli ances EC D ecl aration of Conformity Comp.
Appendix A: Spec ifi ca ti ons TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 167 P2200 Probe Specifications (Cont.) E nvironmental charact eristics T emperature Operating 32 ° F - 122 ° F (0 ° Ct o+ 5 0 ° C) Nonoperating -- 4 0 ° F - 159.
Appendix A: Spec ifi ca ti ons 168 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 169 App end ix B: Accessories A ll access ories (s tandar d and o ptio nal) ar e available by co ntactin g your loc al T e ktroni x fie ld office . Standar d Accessories P2200 1X, 10X Passi ve Probes.
Appendix B: Acce ss orie s 170 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Optional Accessories (Cont.) 2-channel 4-channel TDS200-, TDS1000- and TDS2000-Ser ies Digi tal Os cillo sc op e Pr og r amme r Man ua l. The programmer m anual (071 - 1075 - XX Engli sh) prov ides command and s yntax inform ation.
Appendix B: Acce ss orie s TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 171 Optional Accessories (Cont.) Internat ional Power Cords. In additi on to the power cord shi pped with your i.
Appendix B: Acce ss orie s 172 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 173 App end ix C: General Care an d Clean ing Gene ral Ca re Do not store or lea ve the i nstrume nt where the L CD displa y w il l be exposed t o dire ct sunlight for long pe riods of time.
A pp end ix C: G ener al Care and C leanin g 174 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 175 Appe ndix D: De faul t Se tup Thi s appe ndix describe s the opti ons, but tons a nd c ontrol s tha t change sett ings when you push the DEF AU L T SETUP button. For a li st of sett ings tha t do not cha nge, refe r to pa ge 178.
Appendix D: D efa ult Set up 176 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual Default setup (C ont.) Menu or control Opti on Default setting MA T H Operation CH1 - - CH2 FFT operation:.
Appendix D: D efa ult Set up TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 177 Default setup (C ont.) Menu or control Opti on Default setting TRI GGER ( Pu l s e) Ty p e Pulse Source CH1 When = Set Puls e Width 1.
Appendix D: D efa ult Set up 178 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual The DEF A UL T SETUP button doe s not reset the foll owing sett ings: H La nguage opt ion H Saved set up f.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 179 App end ix E: GPIB and RS -232 Interf aces The next ta ble provide s an in-de pth c ompa rison of the GP IB and RS-232 inte rfac es. Y ou should sel ec t the i nte rfac e t hat be st me et s your requi rem ent s.
A pp end ix E: GP IB and R S -2 32 I nter faces 180 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual GPIB and R S - 232 interface comparison (Cont.
TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 181 Inde x ? in V alue readout, 44 A Abbreviating, commands, 150 AC coupling, 112 Access ories, 169–172 Acquire, menu, 74 ACQUIRE button,.
Index 182 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual B Bandwidth, limit, 112 Bandwidth limited, readout, 30 Bezel button, xi Binary data, RS - - 232 transfer , 141 Break signals , RS.
Index TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 183 type, 86 DISPL A Y button, 38, 86 Display s tyle of wavef orms, 87 Do Self Cal option, 10 Dots, 86 Dual time base, 36, 90 E Edge tr igger , 100 Er ror L og, 110 EXT T RIG connector , 39 Extension module.
Index 184 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual HOLDOFF contr ol, 36 access , push HOR IZ M ENU button, 109 HORIZ MENU button, 36 Horizontal aliasing, time domain, 20 how to mak.
Index TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 185 O Option button, xi Options A c t i o nt y p e ,3 3 Circular List type, 32 Page Selection type, 32 Radio type, 33 Oscillos cope e.
Index 186 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual RS - - 232 protocol Break signals , 142 compared to GPI B s tandard, 179 conventions, 141 I/O e rrors , 1 41 setup options , 136 .
Index TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual 187 T ime domain , waveform, 1 16 T ransient waveforms, 1 17 T ransit cas e, order ing, 171 TRIG MENU button, 37 TRIG VI EW button, 3.
Index 188 TDS1000/2000-Serie s Digit al Os c illos cop e Us er Man ual scanning, 78 take measurements, 24 time domain, 1 16 transient, 1 17 W eb site address , T ektr onix, xiii W indow time base, 36,.
Ein wichtiger Punkt beim Kauf des Geräts Tektronix TDS1000- and TDS2000- (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tektronix TDS1000- and TDS2000- noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tektronix TDS1000- and TDS2000- - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tektronix TDS1000- and TDS2000- reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tektronix TDS1000- and TDS2000- erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tektronix TDS1000- and TDS2000- besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tektronix TDS1000- and TDS2000- verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tektronix TDS1000- and TDS2000-. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tektronix TDS1000- and TDS2000- gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
