Benutzeranleitung / Produktwartung LCD26-229 des Produzenten Technika
Zur Seite of 39
COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 LCD26-229.
English - 1 - Contents T imers ............................................................... 14 Conditional Access ........................................... 14 TV Setup ........................................................... 14 Setup .........
English - 2 - Accessories MENU / INFO EPG FAV PRESETS SUBTITLE RETURN SOURCE SLEEP SCREEN LANG. Remote Controller Batteries: 2 X AAA Instruction Book Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio.
English - 3 - Information for Users in European Union Countries This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in EU.
English - 4 - Environmental Information • This television is designed to consume less energy to save environment. Y ou not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy ef fi ciency feauture of this TV .
English - 5 - Overview of the Remote Control Standby 1. Image size 2. Sleep timer 3. Numeric buttons 4. Return / Exit / TXT Index 5. Cursor up / TXT up page 6. Cursor left 7. Programme up / Page down (in DTV mode) 8. Programme down / Page up (in DTV mode) 9.
English - 6 - LCD TV and Operating Buttons FRONT and REAR VIEW SIDE VIEW Control Buttons Standby button 1. TV/A V button 2. Programme Up/Down 3. buttons V olume Up/Down buttons 4. Note: Press “ ” /“ ” buttons at the same time to view main menu.
English - 7 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section. Component Video Inputs (YPbPr) 2.
English - 8 - Connecting the LCD TV to a PC For displaying your computer ’s screen image on your LCD TV , you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV .
English - 9 - Using Side A V Connectors Y ou can connect a range of optional equipment to your LCD TV . Possible connections are shown below . Note that cables shown in the illustration are not supplied. • For connecting a camcorder , connect to the VIDEO IN socket and the AUDIO SOCKETS.
English - 10 - Input Selection Once you have connected external systems to your TV , you can switch to different input sources. • Press “ SOURCE ” button on your remote control for directly changing sources. or • Select “ Source ” option from the main menu by using “ ” or “ ” button.
English - 1 1 - After Automatic Search is completed, the following message asking for analogue channel search appears on the screen: T o search for analogue channels, select “Y es”. TV switches to the analogue TV mode. The menu is displayed to search for analogue channels.
English - 12 - Digital T eletext (** for UK only) • Press the “ ” button. • The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons and OK button. The operation method may differ depending on the contents of the digital teletext.
English - 13 - Note: If you enter the same programme number of the channel that you want to move, “.... channel services will be replaced. Do you want to continue?” OSD will be displayed.
English - 14 - • By pressing “ OK ” button, the highlighted channel is added to the Favourite List. • F icon indicates that a channel is added to Favourite List. Removing a Channel from Favourite List • Highlight the channel that you want to remove from the favourite list and press OK button to remove.
English - 15 - Con fi guration Y ou can con fi gure the settings of your TV . Select Con fi guration from Setup menu and press “ OK ” to view this menu.
English - 16 - Set PIN Use “ ” or “ ” buttons to go to “Set PIN” option. Press “ OK ” to display the “Set PIN” window . Use numeric buttons to enter new pin number you will need to input your new pin a second time for veri fi cation purposes.
English - 17 - • By pressing “ ” or “ ” button, select the desired language option. • Guide : By pressing “ ” or “ ” buttons change the guide language.
English - 18 - After APS is fi nalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. Manual Channel Scan In manual channel scan, the number of the multiplex is entered manually and only that multiplex is searched for the channels.
English - 19 - • Setting Warm option gives white colours a slight red stress. • For normal colours, select Normal option. Noise Reduction If the broadcast signal is weak and the picture is noisy , use Noise Reduction setting to reduce the noise amount.
English - 20 - AV L Automatic V olume Limiting (A VL) function adjusts the sound to obtain fi xed output level between programmes (For instance, volume level of advertisements tend to be louder than programmes). Press “ ” or “ ” button to select AV L .
English - 21 - be adjusted correctly . If you set Normal, screen ratio may expand. Ext Out Press “ ” or “ ” button to select Ext Out. Use “ ” or “ ” button to set the Ext Out as On or Off. Note : For copying from a DVD or VCR device, you should choose desired source from source menu and turn “On” to EXT Out from feature menu.
English - 22 - By moving the cursor in four directions you can reach 20 programmes in the same page. Y ou can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except for the A V modes). By cursor action, programme selection is done automatically .
English - 23 - PC Mode Menu System See “ Connecting the LCD TV to a PC ” section for connecting a PC to the TV set. For switching to PC source, press “ SOURCE ” button on your remote control and select PC input. Y ou can also use “ Source ” menu to switch to PC mode.
English - 24 - Zoom Modes Y ou can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. Press “ SCREEN ” button to directly change the zoom mode. Available zoom modes are listed below . Note : In YPbPr and HDMI modes, while in 720p-1080i resolutions, only 16:9 mode is available.
English - 25 - T eletext T eletext system is available if your broadcaster supports T eletext function buttons are listed below: “ ” T eletext / Mix / P A T Mode Activates teletext mode when pressed once. Press again to place the teletext screen over the programme (mix).
English - 26 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1600 X 1200 . The following table is an illustration of some of the typical video display modes. Y our TV may not support dif ferent resolutions. Supported resolution modes are listed below .
English - 27 - Appendix B: A V and HDMI Signal Compatibility (Input Signal T ypes) Source Supported Signals A vailable EXT -1 (SCART) P AL 50/60 O NTSC 60 O RGB 50 O RGB 60 O FAV P AL 50/60 O NTSC 60 .
English - 28 - TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engin.
English - 29 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply .
English - 30 - Contents Features ............................................................... 30 General Properties............................................ 30 Safety Information ................................................ 31 Notes on Discs .
English - 31 - Safety Information CAUTION DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed. CLASS 1 LASER PRODUCT • Manufactured under license from Dolby Laboratories.
English - 32 - DVD Control Panel Buttons A. Disc loader B. Play / Pause Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc.
English - 33 - General Operation Y ou can operate DVD, movie CD, music or picture CD’ s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons.
English - 34 - General Playback Basic Play Press on the power button 1. Please insert a disc to the loader . 2. The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it.
English - 35 - Preferences DEF AUL T If you choose RESET and press SELECT , the factory- presets are loaded. Parental level and parental password does not change. DOWNMIX This mode can be selected when the digital audio output of the TV is used. SURROUND: Surround sound output.
English - 36 - No response from remote control • Make sure the remote control is in the correct mode. • Check batteries are fi tted correctly . • Change the batteries. If nothing works If you have tried the above solutions and none seem to work, try switching your TV -DVD off and on again.
English - 37 - Disc T ypes Compatible with This Unit DI GI TAL AUDIO DVD AU D I O - CD Audi o + Vi d e o 12 cm Audi o 8c m 12 cm 8c m Audi o ( xxxx . m p3 ) MP 3 - C D JPE G RE ADAB LE PI CTURE- C D V.
5 0 1 6 6 2 4 5.
Ein wichtiger Punkt beim Kauf des Geräts Technika LCD26-229 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Technika LCD26-229 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Technika LCD26-229 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Technika LCD26-229 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Technika LCD26-229 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Technika LCD26-229 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Technika LCD26-229 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Technika LCD26-229. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Technika LCD26-229 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
