Benutzeranleitung / Produktwartung BCS450SS des Produzenten Baumatic
Zur Seite of 36
I 1 BCS450SS 46 cm Built-in compact touch control steam oven..
User Manual for your Baumatic BCS450SS 46 cm Built-in touch control steam oven NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance.
3 Contents Environmental note 4 Important safety information 5 – 7 S p e c i f i c a t i o n s 8 – 11 Product and aperture dimensions 8 Product specifications 8 C o o l i n g f a n 9 S t a n d a r.
Environmental note o The packaging materials that Baum atic uses are environmentally friendly and can be recycled. all packaging material with due regard for the environment.
5 IMPORTANT SAFETY INFORMATION Your safety is of the utmo st importance to Baumatic. Please make sure that you re ad this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Customer Care ent.
6 arning and safety instructions will become hot during use and retain heat after operation. hild Safety e appliance and not allowed to touch the appliance at any time . ensure that they are kept under close supervision at all times. eneral Safety en it is open, as this can cause damage to the oven door hinges.
7 leaning o Cleaning of the oven should be carried out on a regular basis. t using this appliance and when following the cleaning procedure. before following the cleaning procedure . y in accordance with he manufacturer’s instructions. as a result of improper use or installation of this appliance.
8 pecifications S Product dimensions Height: 450 mm Width: 595 mm Depth: 560 Aperture mm epth: 565 mm tions s e controlled thermostat ay o 1 x Small baking tray dimensions Height: 445mm Width: 560 mm .
9 ooling fan ture of the oven stable and the external surface temperature lower. lectrical details Supply Connection: fused m contact gap) : ven Light Bulb: 25 W/ E14 300°C screw type pygmy the oven door an d looking on the right hand side of the oven hassis.
10 Description of the oven and accessories 1) Control panel ll perforated tray removable) ing plate 9) Oven door handle Removable) Side racks afety shelf mall baking tray / perforated tray 2) Safety s.
Control Panel Using your oven Initial start up and setting the time of day o When the appliance is in itially connected to the power supply, the display will light up and will flash “0:00”. o First use the selection buttons to select the ‘hour’ of time.
Before first use This oven should be cleaned befo re first use and after each use thereafter. See pages 22 – 27 for full cleaning and mainte nance instructions. o IMPORTANT: Before use, this ap pliance must have water put into its water jug. Do not use distilled water, or any other fluids.
Cooking with steam IMPORTANT: This process MUST be follo wed when you are using a cooking function that involves steam. o Remove the water jug from the ov en and fill it with clean (tap) water, or if this is unavailable, bottled water. o Fill the water jug up to the MAX mark.
Selecting a cooking function Manual Oven functions o Press (Function button) to manually select a function. Press the function button repeatedly to scr oll through the four functions. o “H-1”, Steam function o “H-2”, Fan oven function o “H-3”, Steam and fan oven function o “H-4, Defrost function o Press to confirm selection.
o Once the countdown timer has ended an alarm will sound for two minutes. IMPORTANT: The oven will continue to heat until it is turned off or another function is selected. Setting the temperature Once you have selected an oven function and t imer duration, you can then select your desired oven temperature.
“H-4, Defrost function o Press the and then use the selection buttons to select the temperature you want. o The temperature can be adjusted from 45-60°C. o Press to confirm, and the temperature will be set. The display will show the current temperature.
Preset program (14 preset recipes) Please refer to the preset recipe table on page 18. o Add the food, baking tray and/or pe r forated tray as outlined on the recipe table to the suggested shelf level. o Press the preset recipe program button and select your desired cooking program.
Preset recipes 18.
Preset program timer delay o Press the preset program button and select a preset cooking recipe. o Press the timer button which will display the default timer duration. o Press the timer button again (twice) and the delayed start icon will be displayed o First use the selection buttons to select the ‘hour’ of time you want the oven to start.
o Place baking trays in the centre of the oven (unless otherwise stated) and leave gaps between the trays to allow air to circulate. o Try to open the door as little as possible to view the dishes. o The oven light will remain on during cooking. Warnings o Keep the oven door closed wh en using any oven function.
o It c an al so be use d as a d rip tra y , for collecting cooking juices or fat that may be generated during the cooking process. o When cooking fatty dishes, we recommend that you place some water in the drip pan, to preven t fat from burning and producing unpleasant odours or smoke.
Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. o The oven should be thoroughly clea ned before it is operated for the first time and after each use.
Oven cavity steam-cleaning cycle The purpose of this feature is to fac ilitate the removal of food and grease from the oven cavity after cooking. o Fill the water jug with clean water, either cold drinking water or bottled (softened) water. o Fill the water jug up to the mark.
Boiler descaling The purpose of this feature is to remove any limescale that may have built up in the steam heating dish. o If you do use your household wate r supply to fill the water jug with, then over a period of time, limescale may start to build in the steam heating dish.
Removing the side racks IMPORTANT: You can remove the si de racks of the oven for ease of cleaning. You can wash the si de racks with de tergent and/or wash them in a dishwasher. o Pull the side racks free of their secu ring clips and then pull the side racks out of the oven cavity.
Replacing the oven bulb IMPORTANT: The oven must be disconnected from your mains supply before you attempt to either remove or replace the oven bulb. o Remove all oven shelves, oven pa ns and drip trays, and then the side rack that is on the same side as the oven light.
Removing the oven door for cleaning To facilitate the cleaning of the inside of the oven and the outer frame of the oven, the door can be removed as follows:- 27 o The hinges have two movable bolts on them. o If you raise both of the movable bolts, then the hinges are released from the oven housing.
INSTALLATION The installation must be carried out by a suitably qualified person, in accordan ce with the current v ersion of the following. o UK Regulations and Safety St andards or their European Norm Replacements. o Building Regulations (issued by the Department of the Environment).
29 Installing the oven into the kitchen cabinet ositioning the appliance ll be fitting the oven into is of the size given in the above diagram. own in the “Ventilati on requirements” section on the next page. t the rear panel of th e furniture housing unit has been removed.
30 entilation t requirements for the installation ). ents for the stallation of the appliance into tall housing unit). should be screwed through the front of the oven and into the housing unit.
31 y appliance isn’t working correctly M o The oven isn’t coming on . ou have selected a cooking function and a cooking There appears to be no power to the oven . pliance has been connected to the electrical mains supply correctly. Check that the mains fuses are in working order.
32 rror codes occur when there is a faul t with the applia nce. The oven will king a sound. Err e Error Codes: E stop wor nd a buzzer will or cod Cause of Error Action required E001 The water jug is empty I Refill water jug. f water jug is full, ensure it is inserted properly into the cavity.
33 aumatic Consumables B o BC001 Degreaser for Dishwashers (200 g) o BC002 Descaler for Washing Machin es and Dishwashers (200 g) 0 ml) ctor (250 ml) Purpose Cloth o BC008 Microwave Cover nsumable pro.
34.
United Kingdom 35 G2 0Q X hone Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire R United Kingdom Sales Telep (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 4372 44 Advice Line Telephone 3 6933 (0118) 93 E-mail: sales@baumatic.
46.
Ein wichtiger Punkt beim Kauf des Geräts Baumatic BCS450SS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Baumatic BCS450SS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Baumatic BCS450SS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Baumatic BCS450SS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Baumatic BCS450SS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Baumatic BCS450SS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Baumatic BCS450SS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Baumatic BCS450SS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Baumatic BCS450SS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
