Benutzeranleitung / Produktwartung HP 270 des Produzenten Technicolor - Thomson
Zur Seite of 100
User manual VMD270 VMD270 Cover EN 8/06/01 10:35 Page Cov1.
ENGLISH CONTENTS AUTOMA TIC DEMONSTRA TION 7 GETTING ST ARTED 8 – 17 VIDEO RECORDING & PLA YBACK 18 – 25 VIDEO RECORDING ............. 19 – 2 1 VIDEO PLA YBACK ............... 22 – 25 DIGIT AL STILL CAMERA (D.S.C.) RECORDING & PLA YBACK 26 – 37 D.
2 EN Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents ( 墌 pg. 1). • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference.
EN 3 CAUTIONS: ● This camcorder is designed to be used with P AL-type colour television signals. It cannot be used for playback with a television of a different standard. However , live recording and LCD monitor/viewfinder playback are possible anywhere.
4 EN 䡲 This camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard. Only cassettes marked “ ” and memory cards marked “ ” or “ ” can be used with this unit. Before recording an important scene .
EN 5 • Docking Station DS270 • Remote Control Unit TC120 • CD-ROM • Audio/V ideo Cable ( ø 3.5 mini-plug to RCA plug) • Editing Cable • Battery Pack BPD270 • AAA (R03) Battery x 2 (for .
6 EN How T o Attach The Strap 1 Thread one end of the strap through the eyelet, then pass the other end through the loop. 2 Attach the screw to the tripod mounting socket. T o tighten the screw firmly , use a coin, etc. 3 Adjust the length with the adjuster .
EN 7 MO D E DE M O – ON OF F AUTOMA TIC DEMONSTRA TION Automatic Demonstration takes place when “ DEMO MODE ” is set to “ ON ” (factory-preset). 䡲 A vailable when the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder .
8 EN GETTING ST ARTED GETTING ST ARTED CONTENTS Power ................................................................... 9 – 10 Viewfinder Adjustment .................................................... 11 T ripod Mounting .........................
EN 9 Power This camcorder ’ s 2-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Charger .
10 EN GETTING ST ARTED (cont.) 1 2 T o battery pack mount T o DC OUT terminal T o AC outlet AC Power Adapter/Charger DC cord A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction.
EN 11 PAUSE Viewfinder Adjustment 1 Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch. 2 Pull out the viewfinder fully . 3 T urn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.
12 EN GETTING ST ARTED (cont.) OF F FA DE R / W I P E AM A E PR O GR A CA MER L MA N U A M SYST E DSC END AY DIS P L C AN E W. BA L RE N E ON S C LC D / T V U AO T IM E T DA T E / T I ME COD E CLO CK AD J . – – – F F O N RE TUR CLO CK AD J . 12 .
EN 13 Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Slide down and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically .
14 EN GETTING ST ARTED (cont.) REC M ODE – SP LP MENU Button Lock Button Power lamp Recording Mode Setting Set the tape recording mode depending on your preference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, then open the LCD monitor fully or pull out the viewfinder fully .
EN 15 Memory card Clipped edge Card Cover Loading A Memory Card 1 Make sure the camcorder ’ s power is off. 2 Open the card cover ( MEMORY CARD ). 3 Insert the memory card firmly clipped edge first. • Do not touch the terminal on the reverse side of the label.
16 EN GETTING ST ARTED (cont.) UXG A AU T O GA V SIZ E – – TY QUA L I – FIN E AU TO – SIZE IM A G E – XGA VGA STANDARD Picture Quality Mode Setting The Picture Quality mode can be selected to best match your needs. T wo Picture Quality modes are available: FINE and ST ANDARD (in order of quality).
EN 17 Operation Mode Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/ MEMORY Switch. When the Power Switch is set to “ ” , “ ” appears. When set to “ ” or “ ” , there is no indication.
18 EN VIDEO RECORDING & PLA YBACK VIDEO RECORDING & PLA YBACK CONTENTS VIDEO RECORDING ............................................ 19 – 21 Basic Recording .............................................................. 19 Journalistic Shooting .
EN 19 BR I GH T 25 min 90 min 89 min 3 min 2 min 1 min 0 min min 180 ° 90 ° VIDEO RECORDING Power Lamp Recording Start/ Stop Button T ape remaining time indicator (Approximate) (Now calculating) (Blinking) (Blinking) (Blinking) Display Power Switch Basic Recording NOTE: Y ou should already have performed the procedures listed below .
20 EN VIDEO RECORDING (cont.) 10 x W T 1 x W T 10 x W T 20 x W T 40 x W T Journalistic Shooting In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction.
EN 21 Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
22 EN VIDEO PLA YBACK Power Switch SHUTTLE SEARCH Ring ( 2 / 3 ) Play/Pause Button ( 4 / 6 ) Stop Button ( 5 ) Normal Playback 1 Load a tape ( pg. 13). 2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 23 Use the provided Audio/Video cable and optional S-Video cable. * The Audio cable is not required for watching still images only . ** Refer to “ Docking Station Attachment ” ( pg.
24 EN VIDEO PLA YBACK (cont.) NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg.
EN 25 B L ANK S E ARCH 4 4 Power Switch Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( pg. 21). 1 Load a tape ( pg. 13). 2 Set the VIDEO/MEMORY Switch to “ VIDEO ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
26 EN DIGIT AL STILL CAMERA (D.S.C.) RECORDING & PLA YBACK CONTENTS D.S.C. RECORDING ............................................. 27 – 28 Basic Shooting (Snapshot) ........................................ 27 – 28 D.S.C. PLA YBACK ............
EN 27 SNAP M ODE – FUL L MU L T I – 4 MU L T I – 9 PIN – U P FR A M E D.S.C. RECORDING Basic Shooting (Snapshot) Y ou can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: Y ou should already have performed the procedures listed below .
28 EN T o Delete Unwanted Still Images . . . .... when unwanted still images are stored in the memory card or its memory is full, refer to “ Deleting Files ” ( pg.
EN 29 10 / 24 100 - 0010 100 - 0011 100 - 0012 100 - 0013 10. 10.01 10. 10.01 11 / 24 12 / 24 13 / 24 10. 10.01 10. 10.01 D.S.C. PLA YBACK Power Switch Normal Playback (Of Images) Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card.
30 EN D.S.C. PLA YBACK (cont.) T o view video clips ( pg. 60) stored in a memory card . . . … during normal playback of image, press SET/SELECT ( pg. 84 and 85, ! SET/SELECT Button) once to engage the video clip mode. “ E-CLIP ” appears.
EN 31 F S FS FF 1 2 3 5 4 EXIT 100-DVC00001 VGA 6 IMAGE F S FS FF 1 2 3 5 4 EXIT 100-DVC00001 6 E-CLIP F S FS FF 1 2 3 5 4 EXIT EXPLOSION 6 SOUND S S C E E A L T N E C C E T L [ [ [ + S B / E L – T A ] / N S K E ] LE C T ] 10 / 50 JUMP MENU Index Screen for images Index Playback Y ou can view the files (still images, video clips ( pg.
32 EN D.S.C. PLA YBACK (cont.) 1F 2S 3S 5F 4F 6F EXIT PROTECT 1 F 2 S 3 S 5 F 4 F 6 F EXIT PROTECT DPOF AT FO R M N RE TUR PR OT ECT E DE L ET Display Power Switch MENU Button If Protection is removed PROTECT Index Screen Normal playback Padlock mark Normal playback Protecting Files The Protect mode helps prevent the accidental erasure of files.
EN 33 1 F 2 S 3 S 5 F 4 F 6 F DELETE EXIT SE ECT L EXE CU T E – CA NCE L D ELE E T Deleting Files Previously stored files can be deleted either one at a time or all at once. 1 Set the VIDEO/MEMORY Switch to “ MEMOR Y ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
34 EN D.S.C. PLA YBACK (cont.) TO DELETE THE DISPLA YED FILE Before doing the following, perform steps 1 through 3 on page 33. 4 Press + or – to select “ CURRENT ” and press SET/ SELECT . The Deletion Confirmation Screen appears. 5 Press + or – to select “ EXECUTE ” and press SET/ SELECT .
EN 35 – DPOF ALL SEL ECT RES E T AL L – EXEC UT E CANCE L DPOF Setting Print Information (DPOF Setting) This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to.
36 EN D.S.C. PLA YBACK (cont.) 19 00 00 00 00 03 00 2 0 2 1 2 3 2 2 EXIT 100-DVC00021 VGA 2 4 DPOF SE ECT L – EXE C UT E CANCE L DPOF TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS 1 Perform steps 1 through 4 on pg. 35. 2 Press + or – to select “ SELECT ” and press SET/ SELECT .
EN 37 FO M A T R FO M A T R EX S T I NG I ER ASE FIL E ? S AL L EXE C U TE – C ANC E L T PR OT EC DE L E E T DPOF AT FO R M N RE TUR C ANC E L EXE C U TE Display Initialising A Memory Card Y ou can initialise a memory card anytime.
38 EN ADV ANCED FEA TURES ADV ANCED FEA TURES CONTENTS USING MENUS FOR DET AILED ADJUSTMENT ............ 39 – 45 For Recording Menu ............................................... 39 – 42 For Playback Menu .........................................
EN 39 OF F FADER / IP E AM A E PR O G R A CA MER L M ANUA M SYSTE DSC END AY DIS P L C AN E W W .B A L RE N E ON S C L C D / T V U AO T IM E T DA T E / T I ME COD E CLO CK AD J .
40 EN USING MENUS FOR DET AILED ADJUSTMENT (cont.) Menu Screen Explanations CAMERA WIPE/F ADER PROGRAM AE W .BALANCE REC MODE SOUND MODE ZOOM GAIN UP DIS OFF AGC AU TO OFF ON MANUAL TELE MACRO OFF ON SNAP MODE OFF 5S ANIM. 5S Refer to “ Fade/W ipe Effects ” ( pg.
EN 41 WIND CUT Menu Screen Explanations (cont.) WIDE MODE Records with no change in the screen ratio. For playback on a TV with a normal screen ratio. Inserts black bands at the top and bottom of the screen. During playback on wide-screen TVs, the black bands at the top and bottom of the screen are cut and the screen ratio becomes 16:9.
42 EN NOTES: ● The “ CAMERA ” settings are effective when the Power Switch is set to both “ ” and “ ” . ● The “ MANUAL ” settings are effective only when the Power Switch is set to “ ” .
EN 43 MD OE SOUND MD OE 12 BI T RO SY NCH ODE REC M CO P Y STE R E O – SOUND 1 SP OF F – – – – N RE TUR O.O RE N E ON S C LC D / TV U AO T IM E T DA T E / T I ME CODE – – –F F O N RE T.
44 EN USING MENUS FOR DET AILED ADJUSTMENT (cont.) Each setting is linked with “ DISPLA Y ” or “ SYSTEM ” , which appears when the Power Switch is set to “ ” ( 墌 pg. 41, 42). The parameters are the same as in the description on pg. 41, 42.
EN 45 Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture.
46 EN 5 S – 5 S OF F A N IM. FOR RECORDING 5-Second Recording Record a vacation or an important event in 5-second clips to keep the action moving. This function is available only for video recording. 1 Set the VIDEO/MEMORY Switch to “ VIDEO ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 47 IC F I L HO M CLASS SEP I A GH T T W ILI ON E M ONOT SN O W S SP O RT G IH T SP OTL E S T ROB VI E C D EO OF F ER SHUT T 1/120 Program AE With Special Effects 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
48 EN FOR RECORDING (cont.) SEPIA Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look. MONOTONE Like classic black and white films, your footage is shot in B/W . Used together with the Cinema mode, it enhances the “ classic film ” effect.
EN 49 Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Y ou can also vary transitions from scene to scene. IMPORT ANT: Some Fade/W ipe Effects cannot be used with certain modes of Program AE with special effects ( 墌 pg.
50 EN FOR RECORDING (cont.) Fader And Wipe Menu Menu Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in to a colour screen from a black and white screen, or fade out from colour to black and white. Fade in or out with a full-screen mosaic effect.
EN 51 SNAP M ODE – FUL L MU L T I – 4 MU L T I – 9 PIN – UP FR A M E Snapshot (For Video Recording) This feature lets you record still images that look like photographs onto a tape.
52 EN FOR RECORDING (cont.) While focusing on a nearer subject While focusing on a further subject FEA TURE: Auto Focus PURPOSE: The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity .
EN 53 3 Iris lock indicator BACKLIGHT Button Exposure Control Manual exposure control is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing.
54 EN FOR RECORDING (cont.) White Balance Adjustment A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically .
EN 55 F S FS FF 1 2 3 5 4 EXIT EXPLOSION 6 SOUND APPLAUSE Digital Sound Effects SOUND EFFECT MODE SELECTION 1 Load the provided memory card ( 墌 pg. 15) and a cassette ( 墌 pg. 13). 2 Set the VIDEO/MEMORY Switch to “ VIDEO ” , then set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch.
56 EN SOUND EFFECT RECORDING 6 Press D.SOUND during recording. The “ ” moves and the selected sound effect is recorded onto the tape. • The sound effect cannot be heard from the speaker during recording. Use a headphone set to hear the sound effect.
EN 57 DUBBING Dubbing T o A VCR 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 23 and 24. 2 Set the VIDEO/MEMORY Switch to “ VIDEO ” , then set the camcorder .
58 EN DUBBING (cont.) DV cable (optional) Video unit equipped with DV connector T o DV IN/OUT To D V Core filter Dubbing T o Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector .
EN 59 COP Y OF F ON – SP 6 Play/Pause Button ( 4 / 6 ) Display Power Switch SNAPSHOT Button Dubbing Still Images Recorded On A T ape T o A Memor y Card Still images can be dubbed from a tape to a memory card. 1 Load a memory card ( 墌 pg. 15) and cassette ( 墌 pg.
60 EN - E M A R I E L A D C Y L I P E - M R A E I C L OR C D L I I N P G E - MA S I T L AN C D L B I Y P E - MA I L C L I P COMPLETED e CAR OR E C O R DC L I P T O D T U P SH " SN APSHOT " P.
EN 61 30 ° 30 ° 5m 1 3 2 + – + – The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.
62 EN USING THE REMOTE CONTROL UNIT (cont.) 10 ) @ $ ! # % ^ & * ( 2 3 4 6 8 5 7 9 Buttons 1 Infrared beam transmitting window 2 Zoom (T/W) Buttons 3 DISPLA Y Button 4 SHIFT Button 5 SLOW Rewind/F.
EN 63 Press T Normal playback Left or SLOW Rewind Button T o move image, press (Right) while keeping SHIFT held down. P AUSE PLA Y Zoom Buttons SHIFT Remote sensor Right or SLOW Forward Button Up Button Down Button STOP FEA TURE: Slow-Motion Playback PURPOSE: T o allow slow-speed search in either direction during video playback.
64 EN USING THE REMOTE CONTROL UNIT (cont.) PLAY EFFECT EFFECT ON/OFF PLA O 1 2 3 4 5 Y F B F ACK C M S S V L O E T I E A N P R D F S O I O E F S T A B O E I O E C C N E T E C F H I O LM PLA YBACK EFFECT Select Menu Remote sensor FEA TURE: Playback Special Effects PURPOSE: T o allow you to add creative effects to the video playback image.
EN 65 Audio Dub Standby mode 6e P AUSE PLA Y A.DUB STOP MIC Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode ( pg. 40). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.
66 EN USING THE REMOTE CONTROL UNIT (cont.) P AUSE PLA Y STOP 6e APPLAUSE D.SOUND Audio Dub Standby mode Display Audio Dubbing Using Digital Sound Effects 1 Load the provided memory card ( pg. 15) and perform step 1 and 2 of page 65. 2 Press MENU .
EN 67 P AUSE ST ART/STOP INSERT PLA Y REW 6w STOP 12 : 34 Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. The original audio remains unchanged.
68 EN USING THE REMOTE CONTROL UNIT (cont.) MBR SET SHIFT 3 1 6 789 ` 4 2 5 VCR CODE LIST VCR BRAND NAME LG/ GOLDSTAR 1 1 GE 1 1 9 2 9 ` 9 4 MAGNAVOX 9 5 1 1 7 1 7 6 MITSUBISHI 6 7.
EN 69 DISPLAY MAKE CONNECTIONS Also refer to pg. 23 and 24. 1 A THOMSON VCR equipped with a Remote P AUSE connector . . . ... connect the editing cable to the Remote P AUSE connector . A THOMSON VCR not equipped with a Remote P AUSE connector but equipped with an R.
70 EN USING THE REMOTE CONTROL UNIT (cont.) 1 2 3 4 5 6 7 8 –– : –– ~ ~ ~ ~ ~ ~ ~ ~ – – : –– 0 : 00 0 –– TOT AL COD E TI M E N IO U T MO D E PLA Y CANCEL R.A.EDIT ON/OFF F ADE/WIPE EFFECT EDIT IN/OUT SELECT SCENES 4 Point the remote control at the camcorder ’ s remote sensor .
EN 71 P AUSE ST ART/STOP VCR REC STBY R.A.EDIT ON/OFF 1 2 3 4 5 6 7 8 00 :2 5 ~ 02 : 05 –– 0 7:1 8 ~ 08 : 31 –– –– 0 3 : 33 ~ 05 : 53 13 : 15 15 : : 55 ~ ~ ~ ~ 16 : 29 –– –– ––.
72 EN R.A.EDIT ON/OFF 1 2 3 4 5 6 7 8 –– : –– ~ ~ ~ ~ ~ ~ ~ ~ –– N IO U T MO D E RO SYN CH O. 1 – – – : –– 0 : 00 0 TOT AL COD E TI M E For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others.
EN 73 SYSTEM CONNECTIONS To D V DV cable (optional) To D V connector PC with DV connector PC T o USB USB cable (optional) T o USB connector Core filter Core filter OR [A] Using USB cable [B] Using DV cable NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg.
74 EN REFERENCES REFERENCES CONTENTS DET AILS ................................................................... 75 TROUBLESHOOTING ........................................... 76 – 81 USER MAINTENANCE ...............................................
EN 75 DET AILS I T E M S N O T E S ❍ Perform charging where the temperature is between 10 ° C and 35 ° C. 20 ° C to 25 ° C is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. ❍ Charging times noted above are for a fully discharged battery pack.
76 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION TROUBLESHOOTING 1. No power is supplied. 2. “ SET DA TE/TIME! ” appears. 3. Recording cannot be performed. 4. There is no picture. 5. Some functions are not available using the MENU Button. 6. The focus does not adjust automatically .
EN 77 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 9. In the 5-Second mode, recording ends before 5 seconds have elapsed. 10. Snapshot mode cannot be used. 11 . The colour of Snapshot looks strange. 12. The image taken using Snapshot is too dark. 13. The image taken using Snapshot is too bright.
78 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 18. The Picture W ipe and Dissolve functions do not work. 19. The picture wipe function does not work. 20. Scene transition does not go as expected. 21. The V ideo Echo mode does not work. 18. • The last selected editing scene is ending.
EN 79 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 22. Even when Slow Shutter is not selected, the image looks like it is activated. 23. There is no strobe when the Classic Film or Strobe mode is activated. 24. White Balance cannot be activated. 25. When shooting a subject illuminated by bright light, vertical lines appear .
80 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 33. • Certain Fade/W ipe effects, certain modes of Program AE with special effects, “ DIS ” and other functions that cannot be used together are selected at the same time. 34. • The LCD monitor and the viewfinder are made with high-precision technology .
EN 81 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 42. The LCD monitor , the viewfinder and the lens have become dirty (ex. fingerprints). 43. An unusual mark appears. 44. An error indication (E01 — E06) appears. 45. The charger indicator on the AC Power Adapter/Char ger does not light.
82 EN USER MAINTENANCE OPEN/EJECT Switch PUSH HERE Cassette holder Cleaning The Camcorder 1 T o clean the exterior , wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
EN 83 INDEX Docking Station 1 Multi Connector The Docking Station can be connected with this camcorder through this connector . Never touch it with your hand or hit it with a hard object; if the pins are damaged, the connectors will become unusable due to contact failure.
84 EN INDEX Controls, Connectors And Indicators # 1 3 2 6 u 8 9 0! @ $ % ^ & * 4 5 e i y t W o p Y ( U )q Q w O 7 r I T R E.
EN 85 Controls 1 E-MAIL CLIP REC Button ...................... 墌 pg. 60 2 MENU Button ...................................... 墌 pg. 39 3 • +, – Button ........................................ 墌 pg. 39 • LCD Monitor Brightness Control [MONIT OR BRIGHT +, – ] .
86 EN INDEX Indications LCD Monitor/Viewfinder Indications During Video Recording Only 1 Appears when in the Squeeze or Cinema mode. ( 墌 pg. 41) 2 Displays the selected Fade/W ipe effect. ( 墌 pg. 49, 50) 3 Rotates while the tape is running. ( 墌 pg.
EN 87 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording 3 40 x BR W IG H T T 20 . 1 1 2 7 . : PHOTO 0 3 1 0 9 0 @ 2 3 1 4 5 6 8 7 # ! 1 Appears when the Power Switch is set to “ ” .( 墌 pg. 17) 2 Appears when “ GAIN UP ” is set to “ AUT O ” and the shutter speed is automatically adjusted.
88 EN INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback 1 Displays the sound mode. ( 墌 pg. 43, 45) 2 Displays the Blank Search mode. ( 墌 pg. 25) Displays the selected Digital Sound Effect. ( 墌 pg. 31, 55) 3 Displays the tape speed.
EN 89 Indications Function Displays the battery remaining power . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically .
90 EN Indications Function ● Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( 墌 pg. 67) ● Appears if INSERT ( w ) on the remote control is pressed when the erase protection tab is set to “SA VE”.
EN 91 General Batter y Precautions If the remote control is not functioning even if it is being operated correctly , the batteries are ex- hausted. Replace them with fresh ones. Use only the following batteries: AAA (R03) size x 2 Please make note of the following rules for battery use.
92 EN CAUTIONS (cont.) Memor y Cards T o properly use and store your memory cards, be sure to read the following cautions: 1. During use . . . .... make sure the memory card bears the SD or MultiMediaCard mark. .... make sure the memory card is positioned properly when inserting.
EN 93 Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local THOMSON dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from function- ing properly .
94 EN TERMS F Fade-In/Out ........................................ 墌 pg. 49, 50 Fast-Forward The T ape .............................. 墌 pg. 22 5-Second Recording Mode ....................... 墌 pg. 46 Frame-By-Frame Playback .....................
EN 95 P Picture Quality Mode ................................ 墌 pg. 16 Picture W ipe/Dissolve ......................... 墌 pg. 49, 50 Playback Special Effects ............................ 墌 pg. 64 Playback Zoom ...................................
96 EN SPECIFICA TIONS Camcorder For General Power supply : DC 6.3 V (Using AC Power Adapter/Char ger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx.
EN 97 For Connectors AV Video output :1 V ( p-p ) , 75 Ω , analogue Audio output : 300 mV (rms), 1 k Ω , analogue, stereo DV Input/output : 4-pin, IEEE 1394 compliant AC Power Adapter/Charger ACD270 Power requirement : AC 1 10 V to 240 V ` , 50 Hz/60 Hz Power consumption : 23 W Output Charge : DC 7.
98 EN Y ou can contact THOMSON by dialling: 0845 601 3093, from 16 October 2000 (for Great Britain, all calls will be charged at local rate). www .thomson-europe.
THOMSON multimedia 46 quai A. Le Gallo 92648 Boulogne Cede x F rance RCS NANTERRE B 322 019 464 http://www .thomson-europe.com 35162680 L YT0848-001A © Copyright THOMSON multimedia 2001 Model and ser.
Ein wichtiger Punkt beim Kauf des Geräts Technicolor - Thomson HP 270 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Technicolor - Thomson HP 270 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Technicolor - Thomson HP 270 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Technicolor - Thomson HP 270 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Technicolor - Thomson HP 270 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Technicolor - Thomson HP 270 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Technicolor - Thomson HP 270 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Technicolor - Thomson HP 270. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Technicolor - Thomson HP 270 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
