Benutzeranleitung / Produktwartung MD-801RMKII des Produzenten Tascam
Zur Seite of 29
» M D-801 R @#/ M D-801 P @# MD Recorder/Pla y er O WNER’S MANU AL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
Table of Contents TASCAM MD-801R/P Mk II –i 1 - Introduction 1.1 About the MiniDisc format ................ 1-1 1.1.1 ATRAC compression .......................... 1-1 1.1.2 Buffer memory .................................... 1-1 1.1.3 Random access and U-TOC .
Table of Contents –ii TASCAM MD-801R/P Mk II 4.2.1 Playing back a whole disc .................. 4-1 4.2.2 Playback outputs ................................ 4-1 4.2.3 Monaural playback .............................. 4-1 4.2.4 Playing back a single track .
TASCAM MD-801R/P Mk II 1–1 1 - Introduction This manual cov ers the two models of the MD-801 Mk II product line: the MD-801R Mk II, which is capable of recording and playing back on MiniDisc media, and the MD-801P Mk II, which is for play- back only of such media.
1 - Care of MD media 1–2 TASCAM MD-801R/P Mk II disk from the user , and a file appears as one contigu- ous block of data (e v en though it may be spread o v er many tracks and sectors of the disk), the MD player allo ws separated audio data to appear as a continuous audio track.
1 - About the MD-801R/P Mk II TASCAM MD-801R/P Mk II 1–3 to be con v eniently carried out using a standard k e y- board • Remote control possible from dedicated T ASCAM remote control units (RC-80.
1 - About this manual 1–4 TASCAM MD-801R/P Mk II 1.3.4 Backup memory When the unit is po wered down, the follo wing set- tings are memorized. • A UTO READ Y status (see [20] ) • A UTO CUE settin.
TASCAM MD-801R/P Mk II 3–1 3 - Menu items The selections that can be made using the MD-801’ s menu system af fect the operation of many other functions. W e suggest that you take the time to look through this section and familiarize yourself with the basic contents, so that you hav e an idea of some of the options av ailable to you.
3 - Resume setting 3–2 TASCAM MD-801R/P Mk II The minimum length for the jog loop is 12 frames, and the maximum v alue is 32 frames. The v alue is set in 1-frame steps.
3 - Incremental play TASCAM MD-801R/P Mk II 3–3 3.10 Incremental play This function allo ws auto-cueing of the playback point to the start of the next track when the ST OP key [5] is pressed, or a fader stop command is recei ved (on pin 8 of the parallel remote control port [47] ).
3 - Auto track numbering level 3–4 TASCAM MD-801R/P Mk II 3.12.1Spindle motor time Use this to check ho w many hours the spindle motor has been in operation. 3.12.2Laser pickup time This indicates ho w many hours the laser pickup has been used for recording.
TASCAM MD-801R/P Mk II 4–1 4 - Basic operations This section gi ves you informstion about the basic operations using the MD-801. It assumes that you hav e connected the MD-801 to all the other equipment that you will be using. If you hav e not already made these connections, read 2.
4 - Playback of discs 4–2 TASCAM MD-801R/P Mk II 4.2.4 Playing bac k a single track When the disc has been loaded and the T OC has been read, use the PLA Y MODE ke y to select the SINGLE play mode (see [22] ). Use the TRA CK ke ys [4] to mov e the playback posi- tion to the start of the desired track.
4 - Playback of discs TASCAM MD-801R/P Mk II 4–3 4.2.9 Repeat playbac k Use the REPEA T key [26] to enable the repeat mode as sho wn in the display ( REPEA T ). The three dif ferent repeat modes av ailable corre- spond to the three playback modes set with the PLA Y MODE key [22] (whole disc, SINGLE track or A-B points, as set abov e).
4 - Recording operations 4–4 TASCAM MD-801R/P Mk II NO TE The point at which the JOG ke y was pressed will not be included in the jog loop . T o include this point in the loop , you m ust tur n the JOG dial counterclockwise .
4 - Recording operations TASCAM MD-801R/P Mk II 4–5 MD-801R model only . 4.3.1 General notes on recording using the MD format Because the MD method of recording is some what dif ferent to a linear recording method, such as tape, you should note the follo wing points.
4 - Recording operations 4–6 TASCAM MD-801R/P Mk II 1 Select the recording method (digital or analog) and the appropriate input source. 2 Make sure the unit is stopped.
4 - Recording operations TASCAM MD-801R/P Mk II 4–7 2 Cue the playback point to the place that you want to start recording. 3 Press the READ Y ke y [7] to put the MD-801 into play ready mode. This step is the primary dif ference between replace recording and ordi- nary post-script recording.
4 - Recording operations 4–8 TASCAM MD-801R/P Mk II vious one. If the digital signal is not resumed within 30 seconds of interruption, recording will stop .
TASCAM MD-801R/P Mk II 5–1 5 - Editing operations Unlike tape or other linear media, the MD-801 pro- vides you with a wide range of editing tools, allo w- ing you to make arbitary cuts, “splices” and rearrangements of running order without having to re-record any parts of the material.
5 - Erasing a track 5–2 TASCAM MD-801R/P Mk II of the loop is the point at which you want to di vide the track. NO TE Y ou can set the length of the jog loop in the menu system (see 3.5, "Jog loop length"). 5 When the start of the jog loop is correctly posi- tioned, turn the SHUTTLE wheel clockwise.
5 - Moving tracks TASCAM MD-801R/P Mk II 5–3 The PLA Y indicator abov e the PLA Y ke y will flash, as will the EDIT indication in the display , to sho w that rehearsal mode has been entered.
5 - A and B point erase operations 5–4 TASCAM MD-801R/P Mk II of operation is the same, the function is so flexible that it can be used for many dif ferent purposes.
5 - Moving an A-B point TASCAM MD-801R/P Mk II 5–5 If the A point is set at the start of a track, and the B point at the end of another track, the whole of the tracks containing and between these points will be erased (in the example abo ve, tracks 2 and 3 will be erased.
5 - Restoring erased material 5–6 TASCAM MD-801R/P Mk II bers are renumbered accordingly . See the dia- gram abov e for an example. If you need to make the ne w track (formerly the A-B portion) into part of the preceding and/or follo wing track, use the track combine facility (see 5.
5 - Erasing a complete disc TASCAM MD-801R/P Mk II 5–7 3 T urn the SHUTTLE wheel clockwise. The dis- play changes: 4 T urn the SHUTTLE wheel clockwise once again to change the current track from mono to stereo or vice versa . The display will sho w Now Editing , follo wed by Complete .
5 - Track and disc title entry 5–8 TASCAM MD-801R/P Mk II tion will mov e the cursor more than one position. 7 Continue using the D ATA dial and SHUTTLE wheel to enter characters, until the title is complete. 8 T o store the title, press the EDIT ke y .
5 - Track and disc title entry TASCAM MD-801R/P Mk II 5–9 5.11.6Copying disc and trac k titles When two MD-801 units are connected together using the optional PW -1XMD serial cable, disc and track titles can be copied from one unit (master) to the other (slav e), as described in 4.
TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: (213) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.
Ein wichtiger Punkt beim Kauf des Geräts Tascam MD-801RMKII (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tascam MD-801RMKII noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tascam MD-801RMKII - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tascam MD-801RMKII reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tascam MD-801RMKII erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tascam MD-801RMKII besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tascam MD-801RMKII verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tascam MD-801RMKII. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tascam MD-801RMKII gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
