Benutzeranleitung / Produktwartung DV-W11R des Produzenten Tascam
Zur Seite of 40
User’s Manual 2U Rackmount TASCAM DV-W11R DVD/CD Duplicator Models:.
.
Rackmount DVD/CD Duplicator Use r’s Manual i Safety Precautions Rackmount DVD/CD Duplic ators are high-precision electroni c devices. Do not use them in any manner other than as specified in this manual . Please read thi s manual in its en tirety before you begin the installati on procedure.
ii Rackmoun t DVD/CD Dupl icator Use r’s Manual Piracy Statement Copying or duplicating copyright ed materials—including au dio compact discs (CDs) and DVD movies—without the permission of the copyright hol der constitutes theft of intell ectual property.
Table of Co ntents Rackmount DVD /CD Duplicator Use r’s Manual iii Table of Contents Safety Preca utions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Copyright and Trademar k Information .
Table of Contents iv Rackmoun t DVD/CD Dupl icator Use r’s Manual 11.15 Device Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 11.16 System Info . . . . . . . . . . . . . . . . . . . .
Rackmount DVD/CD Duplicator Use r’s Manual v List of Figures Figure 1. Rackm ount DVD/CD Duplicat or Package Content s . . . . . . . . . . . . . . . . . . . . . 2 Figure 2. Front Panel of Rackmount DVD/CD Duplicator . . . . . . . . . . . . . . . . .
vi Rackmount DVD/CD Duplic ator User’s Manual.
Rackmount DVD/CD Duplicator Use r’s Manual 1 Chapter 1. Introduction Thank you for purchasing a TEAC or TASCA M 2U Rackmount DVD/CD Duplicator. The Rackmount DVD/CD Duplicator i s a stand-alone disc-t o-disc DVD/CD Duplicator system that does not require connection to a computer.
Rackmount DVD/CD Duplicator Package Contents 2 Rackmount DVD/CD Duplica tor User’s Manual Rackmount DVD/CD Duplic ator Package Contents Your Rackmount DVD/CD Duplicator package includes the follow ing items (see Figure 1).
Front Panel Rackmount DVD/CD Duplicator Use r’s Manual 3 Front Panel Figure 2 illustrates the front pa nel of the Rackmount DVD/CD Dupl icator. Figure 2. Front Panel of Rackmo unt DVD/CD Duplicator power switch: Use the power switch to turn the power to the DVD/C D Duplicator unit on or off.
Front Panel 4 Rackmount DVD/CD Duplica tor User’s Manual The DVD/CD Duplicator control panel features an LCD display and four buttons. These buttons are described in the fo llowing table: source drive: Insert the disc to be copied in to the source drive.
Rear Panel Rackmount DVD/CD Duplicator Use r’s Manual 5 Rear Panel Figure 4 illustrates the rear panel of t he Rackmount DVD/C D Duplicator. The unit features a cooling fan and an AC Power In connector. Figure 4. Rear P anel of the Rackmount DVD/ CD Duplicator cooling fan: Ball-bearing fan cools the R ackmou nt DVD/CD Duplicator.
Rear Panel 6 Rackmount DVD/CD Duplica tor User’s Manual.
Setup Rackmount DVD/CD Duplicator Use r’s Manual 7 Chapter 2. Using the Rackmo unt DVD/CD Duplicator This chapter explains how to set up the Rackmount DVD/CD Du plicator.
Setup 8 Rackmount DVD/CD Duplica tor User’s Manual 4. Connect one end of the included power cable to the back of the DVD/C D Duplicator. Connect the other end of the power cable to a three-prong recep- tacle AC outlet. 5. Turn on the power to the DVD/CD Duplicator by pressing the power button on the lower front-cen ter of the unit.
Basic Operation Rackmount DVD/CD Duplicator Use r’s Manual 9 Basic Operation This section explains the basic operat ion of the Rackmount DVD/CD Duplicato r. Copying from the Optical So urce Drive 1. Place your DVD/CD sour ce disc in the disc tray of the source drive.
Copying from the Optical Source Drive 10 Rackmount DVD/CD Dupl icator User ’s Manual.
1 Copy Rackmount DVD/CD Duplicator Use r’s Manual 11 Chapter 3. Rac kmount DVD/CD Duplicator Functions The DVD/CD Duplicator features 12 functi ons: Copy, Test, Test &Copy, Verify, Compare, Prescan, Disc Info, Select So urce, Image, Edit Track, Setup, and Advanced Setup.
5 Compare 12 Rackmount DVD/CD Dupl icator User ’s Manual 5 Compare The Compare functi on compares data on the sour ce and target discs after the copy process is complete. 6 Prescan The Prescan function is performed on the source drive. This function scans the disc to determine the maximum da ta/audio extraction speed.
10. Edit Track (for CD only) Rackmount DVD/CD Duplicator Use r’s Manual 13 10. Edit Track (for CD only) The Edit Track functions enable you to create and copy a collection of songs from different audio discs. 10.1 CD to CD Edit You can use this function to copy tracks fr om one or mo re discs and burn them to a CD-R.
10.1 CD to CD Edit 14 Rackmount DVD/CD Dupl icator User ’s Manual You can press the but ton to display (2) for t he second (2) song, and so on. In this example, we will choose to include the first track on our mix CD. 5. Select the first track, then press the (ENT) button.
10.1 CD to CD Edit Rackmount DVD/CD Duplicator Use r’s Manual 15 The system will ask if you want to keep editin g. 10. To continue editing, press the / buttons to display Yes , as shown below. If you choose not to continue, select No , then skip to Step 18.
10.1 CD to CD Edit 16 Rackmount DVD/CD Dupl icator User ’s Manual 15. Press the (ENT) button to finish th e CD editing, an d then press the / buttons to display Yes .
10.2 CD to HDD Rackmount DVD/CD Duplicator Use r’s Manual 17 19. Press the / arrow butto ns to display Yes , then press the (ENT) button. Once you indicate that you wish to close the session, the LCD panel will display the message as follows.
11.3 DVD Burn Speed 18 Rackmount DVD/CD Dupl icator User ’s Manual 11.3 DVD Burn Speed The DVD Burn Speed setting controls the writin g speed of the target drive when recording onto DVD±RW m edia. The default valu e is MAXIMUM , which writes at the highest speed available on the target drive.
11.10 Eject Disc Rackmount DVD/CD Duplicator Use r’s Manual 19 11.10 Eject Disc The Eject Disc setting controls the ejection of discs by the target drive. Three options are available: • Eject Good Only – This option ejects only succe ssfully copied discs.
11.16 System Info 20 Rackmount DVD/CD Dupl icator User ’s Manual 11.16 System Info The System Info function displays informat ion for the interface board. 11.17 Quick Erase The Quick Erase function performs a Quick Erase on DVD±RW discs. 11.18 Full Erase The Full Erase function performs a Full Erase on DVD±RW discs.
12.3 Read Error Skip Rackmount DVD/CD Duplicator Use r’s Manual 21 12.3 Read Error Skip The Read Error Skip setting controls error skipping during reading of the source disc. If the setting is OF F and an error is det ected, the target drive stops and displays the read error message.
12.10 Load Default 22 Rackmount DVD/CD Dupl icator User ’s Manual 12.10 Load Default The Load Defa ult function resets all setting s to factory default values. It is recommended that you reset to the default valu es if the DVD/CD Duplicator fails to function properly after you make chang es to the original configuration.
Rackmount DVD/CD Duplicator Use r’s Manual 23 Appendix A. List of Functions 1C o p y 2T e s t 3 Test & Copy 4V e r i f y 5C o m p a r e 6P r e s c a n 7 Disc Info 8 Select Source (unavailable function) 9 Image (unavailable function) 9.1 Load 9.2 Delete Image 9.
24 Rackmount DVD/CD Dupl icator User ’s Manual Appendix B. LCD Messages This appendix explains the messages that may appear on the LCD panel. Normal Conditions Message Meaning Initialize SDRAM Initialize system memory. Detect drives Detect the drives connected to the system.
Rackmount DVD/CD Duplicator Use r’s Manual 25 Audio Editing Message Meaning Lost selected Tracks? Abort and delete the selected tracks. End edit disc and burn? Finish the mu sic disc editing and start to copy.
26 Rackmount DVD/CD Dupl icator User ’s Manual Appendix C. Frequently Asked Questions (FAQ) The following FAQ section may help you to resolve som e common problems. 1. How do I reset the unit to its factory settings? Refer to function “12.10 Load Defaul t” on page 22.
FAQ Rackmount DVD/CD Duplicator Use r’s Manual 27 FAQ 5. What does the Target Overflow message mean? This message may be displayed when the source master CD disc contains data/music in excess of the 700MB/80min disc capacity. These types of discs are often called “O verburn” discs.
FAQ 28 Rackmount DVD/CD Dupl icator User ’s Manual 9. How do I extract audio tracks fr om different CD discs to cr eate a compilation audio CD? On the main menu, go to function [10 Edit Track] and press the (ENT) button. Press the (EN T) button to execute the [ 10.
FAQ Rackmount DVD/CD Duplicator Use r’s Manual 29 Appendix D. About DVD±R and DVD±RW Discs This appendix explains how to handle, lo ad, and eject compact discs, includi ng DVD±R and DVD±RW discs.
Loading and Ejecting Discs 30 Rackmount DVD/CD Dupl icator User ’s Manual Loading and Ejecting Discs To load a disc into the source or a target drive, first open the disc tray by pressing the Load/Eject button on the fr ont of the drive. Place the di sc on the disc tray with its label side facing up.
Loading and Ejecting Discs Rackmount DVD/CD Duplicator Use r’s Manual 31 Appendix E. Specifications The following table lists the product specifications for the Rackmou nt DVD/CD Duplicator.
Loading and Ejecting Discs 32 Rackmoun t DVD/CD Dupl icator Use r’s Manual Appendix F. Technical Support For technical support, please cont act the TEAC and TASCAM Support Center. Technical Support Telephone: (323) 727-4860 • Fax: (323) 869-8751 Monday - Friday 8:00 am to 12:00 pm and 1:00 pm to 5:00 pm PST http://www.
Ein wichtiger Punkt beim Kauf des Geräts Tascam DV-W11R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tascam DV-W11R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tascam DV-W11R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tascam DV-W11R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tascam DV-W11R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tascam DV-W11R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tascam DV-W11R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tascam DV-W11R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tascam DV-W11R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
