Benutzeranleitung / Produktwartung DVR4-1000 SW242-DU2 des Produzenten Swann
Zur Seite of 24
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
4 4 P ackage Contents DVR4-1000™ Unit Remote Contr ol Operating Instructions Easy Setup Guide Power Adapter with Cable Softwar e CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer create an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
8 8 Connecting the D VR to a TV Monitor T urning the DVR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
10 10 IMPORT ANT NOTE: The following instructions are for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pr essing the Menu Button T o navigate the menus press the dir ectional arrow keys T o select the highlighted option press or or T o return to the previous menu pr ess Note: The menu cannot be accessed while in playback or backup mode.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pr essing the Menu Button T o navigate the menus press the dir ectional arrow keys T o select the highlighted option press or or T o return to the previous menu pr ess Note: The menu cannot be accessed while in playback or backup mode.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
10 10 IMPORT ANT NOTE: The following instructions are for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
8 8 Connecting the D VR to a TV Monitor T urning the DVR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer create an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
4 4 P ackage Contents DVR4-1000™ Unit Remote Contr ol Operating Instructions Easy Setup Guide Power Adapter with Cable Softwar e CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
Ein wichtiger Punkt beim Kauf des Geräts Swann DVR4-1000 SW242-DU2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Swann DVR4-1000 SW242-DU2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Swann DVR4-1000 SW242-DU2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Swann DVR4-1000 SW242-DU2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Swann DVR4-1000 SW242-DU2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Swann DVR4-1000 SW242-DU2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Swann DVR4-1000 SW242-DU2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Swann DVR4-1000 SW242-DU2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Swann DVR4-1000 SW242-DU2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
