Benutzeranleitung / Produktwartung C2SBM-Q des Produzenten Supermicro
Zur Seite of 95
C2SBM-Q USER’S MANUAL Revision 1.1a.
Manual Revision 1.1a Release Date: August 2, 2010 Unless you request a nd receive written permission fr om Super Micro Computer, Inc. , you may not copy any part of this docu ment.
Preface iii Preface About This Manual T h i s ma n u al is written for system integrators , PC technician and knowledgeable PC users. It provides information for the installation and use of the C2SB M-Q m otherbo ard. Th e C2S BM-Q supports a singl e Co re 2 Duo/Cor e 2 Quad processor with a system bus speed of 1333/1066/800 MHz.
C2SBM-Q User ’ s Manual iv T able of Contents About This Manual ...................................................................................................... iii Manual Organization ..........................................................
v T able of Contents Chassis Intrusion .................................................................................... 2-14 Fan Headers ............................................................................................. 2-15 VGA Connector .
C2SBM-Q User ’s Manual vi 3-4 Returning Merchandise for Service ................................................................. 3-4 Chapter 4: BIOS 4-1 Introduction ..................................................................................
Chapter 1: Introduction 1-1 Chapter 1 Introduction 1-1 Overview Checklist Co ngrat ulati ons on purc hasi ng y our c omp uter mot her boar d f rom an a ckn owle dged lea der in the in dustr y.
1-2 C2SBM-Q User ’ s Manual Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.
Chapter 1: Introduction 1-3 C2SBM-Q Image Note: Al l pictures and drawin gs shown in th is manual were based up on the latest PCB Revision available at the time of publishing of the manual. The motherboard you've received may or m ay not look exactly the s ame as those in this manual.
1-4 C2SBM-Q User ’ s Manual Motherboard Layout Important Notes to the User • Jumpers not indicated are for test purposes only . • See Chapt er 2 for detailed information o n jumpers, I/O por ts and JF1 front panel conne ctions. • " " ind icates the locatio n of "Pin 1.
Chapter 1: Introduction 1-5 C2SBM-Q Quick Reference Jumpers Description Default Setting JBT1 CMOS Clear (See Chapter 2) JFSB1/JFSB2/JFSB3 Front Side Bus Frequency All Pins 1-2 (Auto) JI 2 C1/JI 2 C2 S.
1-6 C2SBM-Q User ’ s Manual Motherboard Features Processor • Single Intel Core 2 Duo/Core 2 Quad Processor with a system bus speed of 1333/1066/800 MHz.
Chapter 1: Introduction 1-7 Onboard I/O • Built in ICH9DO SA T A Controller , four connectors for up to four devices Note : The onboard SA T A 0,1,4,5 may be displayed as SA T A 0,1,2,3 as the order on the silkscreen may differ from the one shown in the BIOS (see Chapter 4).
1-8 C2SBM-Q User ’ s Manual C2SBM-Q System Block Diagram Note: This is a genera l block diagram an d may not exactly r epresent the feature s on your motherbo ard. See the follow ing pages for the actual specications of each motherboard. Block Diagram SLOTS LGA775_PROCESSOR ICH-9DO LPC I/O MS.
Chapter 1: Introduction 1-9 1-2 Chipset Overview The Intel Q35 Chipse t is specially designed for use with Intel Core 2 Duo and Quad processors. It consists of two primary components: the Graphic Memory Control - ler Hub (GMCH) an d the I/O Controlle r Hub (IC H9DO).
1-10 C2SBM-Q User ’ s Manual 1-3 Recovery from AC Power Loss BIOS provides a setting for you to determine how the system will respond when AC power is lost and then re stored to the system.
Chapter 1: Introduction 1-1 1 hance clock control. A hardware-based component provides software-independent thermal management that is compatible with the ACPI Revision 3.
1-12 C2SBM-Q User ’ s Manual 1-7 V ersatile Media Capabilities High DenitionAudio The High Denition Audio Controller embedded in the ICH9 delivers up to 4 codecs that can be us ed for different types of code cs, such as audio and m odem codecs.
Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o prevent dam - age to your system board, it is importa nt to handl e it very care fully . The fo llowing measures are generally sufcient to protect your equipment from ESD.
2-2 C2SBM-Q User's Manual Installati on of the LGA 775 P rocessor 1 . P r e ss t he l o ad l ev e r to r el e a s e the load plate, which covers t he CPU socket, from its locking position. Load lever 2. Gently lift the load lever to open the load plate.
Chapter 2: Installation 2-3 Socket Key (Socket Notch) Bottom Center Edge T op Center Edge Load Lever CPU in the CPU socket Plastic cap is released from the load plate if CPU properly installed. 3. Use your thumb and your index n - ger to hold t he CPU at the top center edge and the bottom center edge of the CPU.
2-4 C2SBM-Q User's Manual Fan Wires Thermal Grease CPU Heatsink Fastener Heatsink Fins 1. Locate the CPU Fan on the mother - board. (Refer to the layout on the right for the CPU Fan location.) 2. Positio n the heatsink in s uch a way that the he atsink fan wires are closest to th e CPU fan and are not interfered with other components.
Chapter 2: Installation 2-5 8. Repeat Step 6 to insert all four heatsink fasteners into the mounting holes. 9. Once all four fasteners are securely insert - ed into th e mou nting holes and the heatsi nk is properly installed on the motherboard, connect the heatsink fan wires to the CPU Fan connector .
2-6 C2SBM-Q User's Manual 2-4 I nstalling DIMMs Note: Check the Supermicro web site for recommended memory modules. W arning: Exercise extreme care when installing or removing DIMM module s to prevent any p ossible damage. Als o note that the memory is interleav ed to improve perfo rmance (see step 1 ).
Chapter 2: Installation 2-7 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin PW.
2-8 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin.
Chapter 2: Installation 2-9 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin PW.
2-10 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
Chapter 2: Installation 2-1 1 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin .
2-12 C2SBM-Q User's Manual Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LE D Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR LED_Anode+ LED_Anode+ LED_Anode+ LED_Anode+ Gr ound Gr ound X X X X Power Butt on The Power Button connection is located on pins 1 and 2 of JF1.
Chapter 2: Installation 2-13 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin P.
2-14 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
Chapter 2: Installation 2-15 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin P.
2-16 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
Chapter 2: Installation 2-17 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin P.
2-18 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
Chapter 2: Installation 2-19 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin P.
2-20 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
Chapter 2: Installation 2-21 2-7 Jumper Settings Explanation of Jumpers To m o d i f y t h e o p e r a t i o n o f t h e motherboard, jumpers can be used to c hoose b etween optio nal sett ings. Jum pers c reat e s hort s b etwe en two p in s to c ha n ge t he f un c ti o n o f th e connector .
2-22 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
Chapter 2: Installation 2-23 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin P.
2-24 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
Chapter 2: Installation 2-25 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin P.
2-26 C2SBM-Q User's Manual GLAN LEDs T he r e is on e Gi ga b it - LA N p o rt (J 1 1 ). This Gigabit Ethernet LAN port has two LEDs. The yello w LED i ndicates act ivity , while the Link LED may be green, amber or off to indicate the speed of the con - nection.
Chapter 2: Installation 2-27 FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pin P.
2-28 C2SBM-Q User's Manual FAN1 JI2C2 JWOR JFSB3 JF1 JWD JLED Battery J40 DIMM1A DIMM2A DIMM1B I-SATA2 I-SATA3 SPEAKER KB/MOUSE CPU Fan J28 VGA JGS1 USB 2/3/4/5 J43 J11 USB 0,1 J46 Audio J41 4-Pi.
3-1 Chapter 3: T roubleshooting Chapter 3 T roubleshooting 3-1 T roubleshooting Procedures Use the following pro cedures to troubleshoot your sys tem. If you have followed all of the procedures below .
3-2 C2SBM-Q Us er's Manual 2. Use the speaker to determine if any beep codes exist. Refer to Appendix A for details on beep codes. Note: If you are a system integrator , VAR or OEM, a POST diagnos - tics card is recommended. For I/O port 80h codes, refer to App.
3-3 Chapter 3: T roubleshooting 3. If you still cannot resol ve the p roblem, includ e the fo llowing infor mation when contacting Super Micro for technical support: • Motherboard model and PCB revi.
3-4 C2SBM-Q Us er's Manual process may take a few minutes to complete. Do not be concerned if the screen is paused for a few minutes. Question: What's on the CD that came with my motherboard? Answer: The supplied compact disc has quite a few drivers and programs that will g reatly enhanc e your system.
3-5 Chapter 3: T roubleshooting 3-4 Returning Merchandise for Service A receipt or copy of your invoice marked with the date of purchase is required be - fore a ny warranty service will be rendered. Y ou can obtain service by ca lling your vendor for a Returned Mer chandise A uthorization (RMA) number.
3-6 C2SBM-Q Us er's Manual Notes.
Chapter 4: BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the Phoenix BIOS™ Setup utility for the C2SBM-Q.The Phoenix ROM BIOS is stored in a ash chip and can be easi ly upgra ded usin g a oppy disk-based program.
4-2 C2SBM-Q User's Manual 4-2 Running Setup * Default settings are in bold text unless otherwise noted . The BIOS setup options described in this section are selected by choosing the appropriate text from the mai n BIOS Setup screen .
Chapter 4: BIOS 4-3 Main BIOS Setup Menu Main Setup Features System Time T o set the system date and time, key in the correct information in the appropriate elds. Th en press the <En ter> key t o save th e data. System Date Using the arrow keys, highlig ht th e mo nth, day and year elds, and enter the correct data.
4-4 C2SBM-Q User's Manual Native Mode Operation Select S erial A T A for SA T A or select Au to (Native Mo de) for A T A. T he options ar e: Serial A T A and Auto . Serial A T A (SA T A) RAID Enable Select Enable to enable Serial A T A RAID Functions.
Chapter 4: BIOS 4-5 IDE Channel 0 Master/Slave/SA T A Port2/SA T A Port3/Ext. Primary Master/Slave These setti ngs allo w the us er to se t the pa rameters of s lots ind icated ab ove. Hit <Ente r> to activ ate th e fol lowing sub-men u scr een fo r deta iled options of these items.
4-6 C2SBM-Q User's Manual Cylinders: This item indicates the status of Cylinders. Headers: This item indicates the number of headers. Sectors: This item displays the number of sectors. Maximum Capacity : This item displ ays t he ma ximum stora ge ca pacity of the system.
Chapter 4: BIOS 4-7 4-4 Advanced Setup Choose Advanced from the Phoenix BIOS Setup Utility main menu with the arrow keys. Y ou should see the following display . The items with a triangle beside them have sub- menus that can be accessed by highlighting the item and pressing <Enter>.
4-8 C2SBM-Q User's Manual ACPI Sleep Mode Use the set ting to determi ne if you wan t to us e the ACPI (Ad vanced C onguratio n and Power Interface) power management on your system when the system enter into the sleep mode. The options are S1, S3 and S1S3.
Chapter 4: BIOS 4-9 W atch Dog Select Enabled to automatically reset the system if the system is not active for more than 5 minutes. The options are Enabled and Disabled . Summary Screen This setting allows you to Enable or Disabl e the summary screen which displays the system conguration during bootup.
4-10 C2SBM-Q User's Manual L3 Cache (Available when supported by the CPU.) Set to Enabled to enable t he function of L3 Cache to optimize the system and CPU performance. The options are Disabled and Enabled . Thermal Management 2 (Available when supported by the CPU.
Chapter 4: BIOS 4-1 1 Note: If there i s any change to this s etting, you will n eed to power off and restart the system for the change to take effect.) Please refer to Intel’s web site for detailed information. No Execute Mode Memory Protection (A vailable when supported by the CPU and the OS.
4-12 C2SBM-Q User's Manual Default Primary Video Adapter This fea ture a llows the user to sele ct the vi deo de vice u sed by the BIOS durin g POST . If set to Auto , PEG, PCI, IGD (Inte rnal Grap hics Devic e) device s wi ll be selected. If set to IGD (Intern al Gr aphics Devic e), I GD an d PCI devi ces w ill b e selected.
Chapter 4: BIOS 4-13 Memory Cache Cache System BIOS Area This setting allows you to desi gnate a reserve area in the system memory to b e used as a System BIOS buffer and allo w BIOS to write (cac he) da ta int o this reser ved memory area.
4-14 C2SBM-Q User's Manual Cache Extended Memory If enabled, this feature will allow the data stored in the extended memory area to be ca ched (wri tten) into a buffer , a st orage are a in the Static DROM (SD ROM) or writte n into L 1, L2, L 3 cache inside the CPU to speed up CPU operatio ns.
Chapter 4: BIOS 4-15 Option ROM Scan When enabled, this setting will initialize the device expansion ROM. The options are Enabled and Disabled. Enable Master This set ting a llows you to ena ble th e selec ted de vice a s the PC I bus mas ter . The options are Enabled and Disabled.
4-16 C2SBM-Q User's Manual Enable Master This set ting a llows you to ena ble th e selec ted de vice a s the PC I bus mas ter . The options are Enabled and Disabled. Latency Timer This setting allows you to set the clock rate for Bus Master . A high-priority , high- throughout device may benet from a greater clock rate.
Chapter 4: BIOS 4-17 Interrupt This setting allows you to select the IRQ (interrupt request) for Serial Port B. The options are IRQ3 and IRQ4. Serial Port C This setting allows you t o de cide how the s ystem contro ls S erial Port C. The options are Enabled (user dened), Disabled, Auto (BIOS controlled) and OS Controlled.
4-18 C2SBM-Q User's Manual man ufac ture r to give t he C PU an d syste m fan s ad diti onal ti me n eede d fo r CPU and sys tem co oling. Th e Ea rly A lar m S ett ing: Sel ect t his set ti ng i.
Chapter 4: BIOS 4-19 Note: In both the alarms above, please take immediate actio n as shown below . See CPU Overheat Alarm to modify the above alarm settings.
4-20 C2SBM-Q User's Manual ver sa. If th e opti on is set to “ 4 - pi n” , the fan sp eed wi ll be con tro lle d by Puls e Wi dth Mo dul ati on (P WM) .
Chapter 4: BIOS 4-21 4-5 Security Settings Choose Security from the Phoenix BIOS Setup Utility main menu with the arrow keys. Y ou should see the following display . Security setting options are displayed by highlighting the setting using the arrow keys and pressing <Enter>.
4-22 C2SBM-Q User's Manual Fixed Disk Boot Sector Select Normal to enable the function of Write-Protect to protect the boot sector on the ha rd drives against v iruses. Password on Boot When this feature is set to Enabl ed, a p assword is required for a use r to enter the syst em at bootup.
Chapter 4: BIOS 4-23 Current TPM State This i tem shows the cu rrent TPM Sta te only . Change TPM State Select "Ena bled & Activat e" to enab le TPM suppor t for the syste m. Sel ect D e-activate & Disab led to disab le the func tion of TPM supp ort.
4-24 C2SBM-Q User's Manual 4-7 Boot Settings Choose Boot from the Phoenix BIOS Setup Utility main menu with the arrow keys. Y ou should see the following display . See details on how to change the order and specs of boot devices in the Item Specic Help window .
Chapter 4: BIOS 4-25 4-9 Exit Choose Exit from the Phoenix BIOS Setup Utility main menu with the arrow keys. Y ou should see the following display . All Exit BIOS settings are described in this section. Exit Saving Changes Highlight this item and hit <Enter> to save any changes you made and to exit the BIOS Setup utility .
4-26 C2SBM-Q User's Manual Notes.
A-1 Appendix A: BIOS POST Messages Appendix A BIOS POST Messages During the Power-On Self-T est (POST), the BIOS will check for problems. If a prob- lem is found, the BIOS will activate an alarm or display a message. The following is a list of such BIOS messages.
A-2 C2SBM-Q User's Manual SystemCMOSchecksumbad-Defaultcongurationused System CMOS has been corrupted or modied incorrectly , perhaps by an application program that changes data stored in CMOS. The BIOS installed Default Setup V alues.
A-3 Appendix A: BIOS POST Messages System cache error - Cache disabled RAM cache failed and BIOS disabled the cache. On older boards, check the cache jumpers. Y ou may have to replace the cache. See your dealer . A disabled cache slows system performance considerably .
A-4 C2SBM-Q User's Manual Fixed disk n (0-3) identied. InvalidSystemCongurationData Problem with NVRAM (CMOS) data. I/OdeviceIRQconict I/O device IRQ conict error . PS/2 Mouse Boot Summary Screen: PS/2 Mouse installed.
A-5 Appendix A: BIOS POST Messages Press <F1> to resume, <F2> to Setup, <F3> for previous Displayed after any recoverable error message. Press <F1> to start the boot process or <F2> to enter Setup and change the settings.
A-6 C2SBM-Q User's Manual Notes.
Appendix B: BIOS POST Codes B-1 This section lists the POST (Power On Self T est) codes for the PhoenixBIOS. POST codes are divided into two categories: recoverable and terminal. Recoverable POST Errors When a recoverable type of error occurs during POST , the BIOS will display an POST code that describes the problem.
B-2 C2SBM-Q User's Manual POST Code Description 18h 8254 timer initialization 1Ah 8237 DMA controller initialization 1Ch Reset Programmabl e Interrupt Controller 20h 1-3-1-1 T est DRAM refresh 22.
Appendix B: BIOS POST Codes B-3 POST Code Description 5Ch T est RAM between 512 and 640 kB 60h T est extended memory 62h T est extended memory address lines 64h Jump to UserPatch1 66h Congure advan.
B-4 C2SBM-Q User's Manual POST Code Description 99h Check for SMAR T Drive (optional) 9Ch Set up Power Management 9Dh Initialize security engine (optional) 9Eh Enable hardware interrupts 9Fh Dete.
Appendix B: BIOS POST Codes B-5 POST Code Description D2h Unknown interrupt D4h Check Intel Branding string D8h Alert Standard Format initialization DEh Log error if micro-code not updated properly Th.
B-6 C2SBM-Q User's Manual Notes.
Appendix C: Software Installation Instructions C-1 Driver/T ool Installation Display Screen Notes : 1. Click the icons showing a hand writing on the pape r to view the readme les for each item. Cli ck a computer icon to the right of an it em to inst all a n ite m (from top to the bottom) one at a time.
C-2 C2SBM-Q User's Manual Supero Doctor III Interface Display Screen-I (Health Information) B. Conguring Supero Doctor III The Supe ro D octor III pr ogram is a W eb-base ma nagement tool that s upports remote man agement capabilit y . It include s Rem ote a nd Lo cal M anagement tools.
Appendix C: Software Installation Instructions C-3 Supero Doctor III Interface Display Screen-II (Remote Control) Note : SD I II Software R evision 1.0 c an be downloa ded from our Web site a t: ftp://ftp.supermicro.com/utility/Supero_Doctor_III/. Y ou can also download SDII I User's Guide at: http://www .
C-4 C2SBM-Q User's Manual Notes.
(Disclaimer) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/e.
Ein wichtiger Punkt beim Kauf des Geräts Supermicro C2SBM-Q (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Supermicro C2SBM-Q noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Supermicro C2SBM-Q - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Supermicro C2SBM-Q reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Supermicro C2SBM-Q erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Supermicro C2SBM-Q besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Supermicro C2SBM-Q verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Supermicro C2SBM-Q. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Supermicro C2SBM-Q gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
