Benutzeranleitung / Produktwartung SC823T des Produzenten SUPER MICRO Computer
Zur Seite of 28
1.0 ® S UPER SC823 CHASSIS USER'S GUIDE (SC823T/SC823S) (SC823i).
1-2 SC823 Chassis User’s Guide The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may b.
1-3 Chapter 1: Safety Information and Technical Specifications Table of Contents Chapter I: Safety Information and Technical Specifications .......... 1 - 4 1-1. Electrical Safety Guidelines ............................................................
1-4 SC823 Chassis User’s Guide Chapter 1-Safety Information and Technical Specifications 1- 1 Electrical Safety Guidelines Warning: To avoid electrical shock, check the power cords as follows: Checking the Power Cords ! Use the exact type of power cords as required.
1-5 Chapter 1: Safety Information and Technical Specifications Use rubber mats specifically designed as electrical insulators when working with computer systems. The power supply or power cord must include a grounding plug and must be plugged into grounded outlets.
1-6 SC823 Chassis User’s Guide 1-3 ESD Safety Guidelines Use a grounded wrist strap designed to prevent static discharge. Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready for use. Touch a grounded metal object before removing the board from the antistatic bag.
1-7 Chapter 1: Safety Information and Technical Specifications To avoid personal injury and property damage, please carefully follow all the safety steps listed below: Before accessing the chassis: 1. Turn off all peripheral devices connected to the SC823.
1-8 SC823 Chassis User’s Guide Before installing the chassis into a rack: 1. Make sure that the rack is securely anchored onto an unmovable surface or structure before installing the chassis into the rack. 2. Unplug the power cord(s) of the rack before installing the chassis into the rack.
1-9 Chapter 1: Safety Information and Technical Specifications A. The SC823 Series chassis contains the following: 1-6 Packing List and the SC823 Specifications ! One (1) 1.44" floppy drive ! One (1) slim CD-ROM drive (*For 823S-R500LP, 823S-R500RC, 823T-R500RC, 823i-R500RC only) ! One (1) 5.
1-10 SC823 Chassis User’s Guide SC823T Component Part# Qt y Notes SATA Drive Tray CSE- PT17 (B) 6 8 cm Hot -Swap Chassis Fan Fan-0070 4 500W Power Supply PW S-0049 2 (*for 823T-R500RC) 550W Power Su.
1-11 Chapter 1: Safety Information and Technical Specifications REV 1.01 REV 1.01 S UPER UPER SATA822 SATA822 R REV 1.01 S UPER SATA822 R D. Serial ATA Back Panel (*SC823T only) D-1 Jumper Settings an.
1-12 SC823 Chassis User’s Guide E. SCSI Back Panel (*SC823S Only) E-1 Jumper Settings and Pin Definitions E-2 Jumper Locations .
2-1 Chapter 2: Chassis Description and Installation Instructions M/B Standoffs A . M5 x 6 - 32 x 6.5L B . M5 x 6-32 x 7.7L Screws for M/B C. Pan head with lock 6- 32 x 4.
2-2 SC823 Chassis User’s Guide B. Chassis Front View and the Front Control Panel Chassis Front Panel A. SCA Drive Trays(6) B. Floppy Disk(1) Front Panel I/O Device Definitions (* for the SC823T/SC823S Series) C.
2-3 Chapter 2: Chassis Description and Installation Instructions LED Panel LED and Button Definitions K. Overheat J. LAN2 I. LAN1 H.HDD Activity G. Power Indicator F.
2-4 SC823 Chassis User’s Guide C. Chassis Rear View and the Back Panel SC823 Chassis Rear View (*SC823T/823S/823i-LP Models) Back Panel Devices (*P/N: CSE-PT21) A. Power Supply A1. Redundant Power Supply B. Back Panel I/O Ports C. Low Profile Expansion Slots(7) A SC823 Chassis Rear View (*SC823T/823i-RC Models) B A1 C B C B.
2-5 Chapter 2: Chassis Description and Installation Instructions *I/O Back Panel (*installed on the back panel-See Page 2-4) Back Panel I/O Port Definitions D.
2-6 SC823 Chassis User’s Guide B. Tools needed 2-2 Chassis Installation A. Important Safety Guidelines Stop This product shall only be accessed, assembled and serviced by technically qualified personnel or technicians.
2-7 Chapter 2: Chassis Description and Installation Instructions 1 1 2 2 C. Removing the Top Cover of the SC823 Chassis Before installing any components, replacing chassis fans or accessing the motherboard, you will first need to remove the top cover.
2-8 SC823 Chassis User’s Guide 2. Pull the drive tray door upward and then pull the drive tray out from the chas- sis. . 1 2 a SC D1. Accessing the SCSI (or SATA) Drive Tray and Installing a Hard Disk(*For the SC823S/823T series) To install the SCA(SATA) drive into the chassis, you need to first remove the SCA(SATA) drive tray from the chassis.
2-9 Chapter 2: Chassis Description and Installation Instructions D2. Accessing the IDE Drive Tray and Installing a Hard Disk (*For the SC823i Series) To install the IDE drive into the chassis, first, you need to remove the top cover; then, you need to remove the IDE drive tray from the chassis.
2-10 SC823 Chassis User’s Guide E. Accessing the Front Chassis Fans and Installing the Air Shroud Procedures: Accessing Chassis Fans 1. Press the release tab located on the left side of the front chassis fan (when facing the front side of the fan) to release it from its locking position as shown in the picture below.
2-11 Chapter 2: Chassis Description and Installation Instructions F. Accessing the Redundant Power Supply (*For the 8S3S- R550RC/R500LP, 823T-R500RC, 823i-R500RC) Procedures 1. Locate the release tab on the left side of the power supply. 2. Push the release tab to the right to release the power supply from its locking position as shown below.
2-12 SC823 Chassis User’s Guide G. Installing the Motherboard Be sure to disconnect the power supply before accessing or installing the motherboard into the chassis. To install the motherboard to the chassis, first, you will need to install the correct type of standoffs at the proper locations before installing the motherboard into the chassis.
2-13 Chapter 2: Chassis Description and Installation Instructions Press the Locking Tab H. Installing Chassis Rails Please make sure that the chassis covers and chassis rails are installed on the chassis before you install the chassis into the rack. Procedures to Install Chassis Rails 2.
2-14 SC823 Chassis User’s Guide 3. Locate the five rail hooks on each side of the chassis and the five corre- sponding holes on each of the inner rail. 4. Align the five holes on the rail against the corresponding hooks on the chassis. Once aligned, attach the inner rail to the chassis by pressing the holes into the corresponding hooks.
2-15 Chapter 2: Chassis Description and Installation Instructions I. Rack Installation After you have installed the inner rails on the chassis, you are ready to install the outer rails of rail assemblies to the rack. (* The rails are designed to fit in the racks with the depth of 28" to 33".
2-16 SC823 Chassis User’s Guide 7. Slide the SC823 chassis into the rack until you hear the click . (The SC823 chassis may not slide into the rack smoothly or easily when installed the first time. However , some adjustment to the slide assemblies might be needed for easy installation.
Ein wichtiger Punkt beim Kauf des Geräts SUPER MICRO Computer SC823T (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SUPER MICRO Computer SC823T noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SUPER MICRO Computer SC823T - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SUPER MICRO Computer SC823T reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SUPER MICRO Computer SC823T erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SUPER MICRO Computer SC823T besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SUPER MICRO Computer SC823T verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SUPER MICRO Computer SC823T. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SUPER MICRO Computer SC823T gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
