Benutzeranleitung / Produktwartung R9001390 des Produzenten Barco
Zur Seite of 59
OWNER'S MANUAL REALITY 9200 TCR+ R9001390.
.
BARCO PROJECTION SYSTEMS Date : 020798 OWNER'S MANUAL REALITY 9200 TCR+ R9001390 Art. No. : R5975938.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.
i-1 Table of Contents 5975938 BARCOREALITY 9200TCR+ 020798 TABLE OF CONTENTS .............................................................................................................. ............................................................. i-1 UNPACKING AND DIMENSIONS .
i-2 Table of Contents 5975938 BARCOREALITY 9200TCR+ 020798 Options ........................................................................................................................ ...............................................................
1-1 Unpacking and Dimensions 5975938 BARCOREALITY 9200TCR+ 020798 1 1 23 4 5 379 Pull To op en UNP ACKING AND DIMENSIONS Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table.
1-2 Unpacking and Dimensions 5975938 BARCOREALITY 9200TCR+ 020798 310a.D RW Battery installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord.
2-1 Installation Guidelines 5975938 BARCOREALITY 9200TCR+ 020798 2 INST ALLA TION GUIDELINES Installation Guidelines Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system.
2-2 Installation Guidelines 5975938 BARCOREALITY 9200TCR+ 020798 B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projector (without feet) and middle of the lens.
3-1 Location and Functions of Control 5975938 BARCOREALITY 9200TCR+ 020798 3 RS 23 2 IN REMOTE PROJECTOR MO DE : GREEN - OPER ATION RED - S TANDB Y COMMUN ICATI ON PORT (800- PERIPHER ALS) RS232 OU T IR-ACK NOWLEDGED IR -REC EIVE D DIAGNOST ICS CODE IR-R ECEI VER 0 I This device com plies with Pa rt 15 of the FCC rules.
3-2 Location and Functions of Control 5975938 BARCOREALITY 9200TCR+ 020798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 32a - + ? COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXI T PAUSE b. Remote control This remote control includes a battery powered infrared (IR) trans- mitter that allows the user to control the projector remotely.
Installation Set Up 4-1 5975938 BARCOREALITY 9200TCR+ 020798 4 INST ALLA TION SET UP The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER .
Installation Set Up 4-2 5975938 BARCOREALITY 9200TCR+ 020798.
5-1 Connections 5975938 BARCOREALITY 9200TCR+ 020798 5 R G BV RGB H / C V On 98 27910 RGB H / C V H RS 232 I N REMO TE PROJ ECTOR MODE : GREE N - OPERA TI ON RED - STANDBY COMMU NIC AT ION P ORT (800-.
5-2 Connections 5975938 BARCOREALITY 9200TCR+ 020798 RGB V RGB H / C V On 98 27 910 RGB H / C V H RS 232 IN REMO TE PROJ ECTOR M ODE : GR EE N - OPER ATION RED - STANDB Y C OMMUN IC ATI O N PORT (8 00-PE RIPHE RALS) RS232 OUT IR-ACKNOWLEDG ED IR-RECEIVED DIAG NOSTIC S CODE IR-RECEIVER 0 I This device complies with Part 15 of the F CC rules.
5-3 Connections 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. RGB V RGB H / C V On 98 27 91 0 RGB H / C V H RS 232 IN REMOT E PROJECTOR MODE : GREEN - .
5-4 Connections 5975938 BARCOREALITY 9200TCR+ 020798 RGB V RGB H / C V H RS 232 IN REMO TE PROJ ECTOR MODE : GRE EN - OPER AT I ON RED - STAND BY C O M M U N IC A T IO N P O R T (800-PERIPHER ALS) RS 232 OU T IR-A CKNO WLED GED IR-R ECEI VED DIAGNOS TICS CODE Fixed 5-Input Slot (slot 2) Slot 2 has 5 BNC input terminals.
5-5 Connections 5975938 BARCOREALITY 9200TCR+ 020798 S- V I D EO 98 27 900 VI DEO LR AUDI O On On TV t une r, e. g. TV D M 40 stereo VCR Audi o am pl i f i er C o m p o s ite Vi deo VCR S-VHS Lum a/ C.
5-6 Connections 5975938 BARCOREALITY 9200TCR+ 020798 R G B H / C V On 98 27910 Float i ng Non-Fl oati ng R G BV RGB H / C V On 98 27 910 R G B H / C V H RS 232 IN REMOT E PROJECTOR MODE : GREEN - OPER.
5-7 Connections 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return.
5-8 Connections 5975938 BARCOREALITY 9200TCR+ 020798 RGB H / C V On 98 2 7920 HDTV VCR RGB V RGB H / C V On 98 27910 RGB H / C V H RS 232 IN REMOTE PROJECTOR MO D E : GREEN - OPERATION RED - ST ANDBY .
5-9 Connections 5975938 BARCOREALITY 9200TCR+ 020798 DI GI TAL VI DEO SOURCE Di gi t al Vi de o RGB V RGB H / C V On 98 27 910 RGB H / C V H RS 232 IN REMOTE PROJECT OR M OD E : GREEN - OPER AT ION RE.
5-10 Connections 5975938 BARCOREALITY 9200TCR+ 020798 Screen Communi cat i on c abl e Proj ec t or IR R em o te R ece iver 800 Project i on room C ontrol r oom RGB V RGB H / C V On 98 27 9 10 RGB H / .
6-1 Controlling 5975938 BARCOREALITY 9200TCR+ 020798 6 C e ilin g Screen I R sensor RCU RGB V RGB H / C V On 98 27910 R G B H / C V H RS 232 I N REMOT E PROJECTOR MODE : GREEN - OPERATION RED - STANDB.
6-2 Controlling 5975938 BARCOREALITY 9200TCR+ 020798 0 127 How to Display a Projector Address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds.
7-1 Start up of the Adjustment Mode 5975109 BARCOREALITY 9200TCR+ 020798 7 ST ART UP OF THE ADJUSTMENT MODE Adjustment Mode All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode'.
7-2 Start up of the Adjustment Mode 5975109 BARCOREALITY 9200TCR+ 020798.
8-1 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 8 RANDOM ACCESS ADJUSTMENT MODE ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with or then <ENTER> <EXIT> to return.
8-2 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Highlight File Service by pushing the control disc up or down and press ENTER to select.
8-3 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 The file name will be displayed in the upper right corner. The following items can be adjusted : Total quantity horizontal pixels.
8-4 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or <ENTER> to toggle or to change value <EXIT> to return EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp delay 0 Clamp width 10 Field polarity [pos] Field select [both] Vertical refresh [sync] Vert.
8-5 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Rename To change the name of a selected file. Use the control disc to select RENAME and press ENTER .
8-6 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Delete To delete a selected file out of the list of files.
8-7 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 0 2.5 CTI ON/OFF CTI : Color Transient Improvement. To improve the transition from one color to another. Highlight CTI by pushing the control disc up or down and press ENTER to toggle between ON and OFF.
8-8 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 3 Dynamic Color Depth Increases color contrast for all video and data sources. Highlight Dynamic color depth by pushing the control disc up or down and press ENTER to select. OFF : default position MIN : half of the effect of MED.
8-9 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OPTIONS Select with or then <ENTER> <EXIT> to return.
8-10 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Size Highlight Size by pushing the control disc up or down and press ENTER to select.
8-11 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Adjustment of the blanking on the top of the image Select with or then <ENTER> <EXIT> to return.
8-12 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798.
9-1 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 9 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. INST ALLA TION MODE Starting up the Installation Mode Push the control disc up or down to highlight Installation and then press ENTER .
9-2 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. 800 Peripheral When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral menu.
9-3 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 CONVERGENCE GREEN TO MIDPOSITION GREEN BLUE ON GREEN RED ON GREEN HATCH ABOUT MOCA GREEN TO MIDPOSITION Are you sure to set the green motoriz.
9-4 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 Red on Green convergence 1 Highlight 'Red on Green' by pushing the Control disc up or down and press ENTER to display the Red on green test pattern. The drawings and digit will be displayed in red.
9-5 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Configuration Highlight "Configuration" by pushing the control disc up or down and press ENTER to select. For more information, see Projector configuration in chapter 4 : 'Installation Set Up'.
9-6 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798.
Service Mode 10-1 5975938 BARCOREALITY 9200TCR+ 020798 10 Select with or then <ENTER> <EXIT> to return. SERVICE MODE Starting up the Service Mode Push the control disc up or down to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active).
Service Mode 10-2 5975938 BARCOREALITY 9200TCR+ 020798 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY LAMP DRIVE MODE MORE... Select with or then <ENTER> <EXIT> to return.
Service Mode 10-3 5975938 BARCOREALITY 9200TCR+ 020798 RGB V RGB H / C V On 98 27910 RGB H / C V H RS 23 2 IN REMOTE PROJECTOR M ODE : GREEN - O PERATION RED - ST AND B Y COMMU NICATION PORT (800-PER IPHER ALS) RS232 OUT IR-ACKNOWLEDG ED IR-REC EIVE D DIAG NOSTIC S COD E IR-RE CEI VER 0 I Thi s dev i ce com pli e s wi th Part 15 of th e FCC rul es.
Service Mode 10-4 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ.
Service Mode 10-5 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. LAMP DRIVE MODE SILENT NORMAL BOOST Select with or then <ENTER> <EXIT> to return .
Service Mode 10-6 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. I2C diagnosis. Gives an overview of the correct working of the I²C controlled IC's.
A-1 Appendix A : Standard Source Set Up Files 5975938A BARCOREALITY 9200 DLC 020798 A ST ANDARD SOURCE SET UP FILES Name : name of file, contains the settings Resolution : image resolution, when fol- lowed by ...I means interlaced. FVERT Hz : vertical frame frequency of the source FHOR kHz : horizontal frequency of the source.
A-2 Appendix A : Standard Source Set Up Files 5975938A BARCOREALITY 9200 DLC 020798 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z PAM500 640 X 400 60,000 26,400 22,810 86 4 840 440 4.
B-1 Lenses 5975938 BARCOREALITY 9200 TCR+ 020798 B Loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the lens too far, otherwise it will fall out of the lens holder.
B-2 Lenses 5975938 BARCOREALITY 9200 TCR+ 020798 Lenses e m a N s n e l h t g n e L ) h c n i ( m m s n e l . m a i d ) h c n i ( m m t h g i e w ) s b l ( g k r e b m u n r e d r o ) 1 : 2 . 1 ( D H Q) 6 9 . 9 ( 3 5 2) 4 4 . 7 ( 9 8 1) 2 . 9 1 ( 7 . 80 6 7 9 2 8 9 R ) 1 : 2 .
C-1 Source Numbers 80 - 89 and 90 - 99 5975738 BARCOREALITY 9200TCR+ 020798 C SOURCE NUMBERS 80 - 89 AND 90 - 99 Projector without any 800 peripheral connected. The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers.
C-2 Source Numbers 80 - 89 and 90 - 99 5975738 BARCOREALITY 9200TCR+ 020798 Source numbers 81 - 85 Only valid if no input module is connected to slot 81 - 85 of a RCVDS05. The source numbers 81 - 85 correspond to the physical inputs 1 - 5 of the projector.
5975938 BARCOREALITY 9200TCR+ 020798 3.
Ein wichtiger Punkt beim Kauf des Geräts Barco R9001390 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Barco R9001390 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Barco R9001390 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Barco R9001390 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Barco R9001390 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Barco R9001390 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Barco R9001390 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Barco R9001390. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Barco R9001390 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
