Benutzeranleitung / Produktwartung SRT 7004 des Produzenten Strong
Zur Seite of 33
www .strong.tv Digital High Definition Satellite Receiver SRT 7004 Picture similar User manual Bedienungsanleitung Manuel d’Utilisateur Manuale utente Manual del usuario Manual do Utilizador.
.
.
www .strong.tv 30 Sep 2014 16:38 H OTLIN E BG +3 59 32 63 44 51 supp or t_ b g@s tron g. tv DK sup po rt _d k@ st rong.t v NL supp or t_ nl @s tron g. tv AT 08 20 40 0 15 0 supp or t_ at @s tron g. tv € 0, 12 /Min . ös terr . Fe stne tz DE 01 80 50 1 49 91 sup po rt _d e@ st rong.
1 English P ART 1 • English SRT 7004 is delivered with USB multimedia support. After downloading the PVR software from the website www.str ong.tv the receiver can be upgraded to support the recording function via USB.
2 P ART 1 • English T ABLE OF CONTENT S 1.0 INSTRUCTION 3 1.1 Safety Instructions 3 1.2 Storage 3 1.3 Equipment Set-up 4 1.4 Accessories 4 1.5 Usage of external USB devices* 4 2.0 YOUR RECEIVER 5 2.1 Default PIN: 0000 5 2.2 Front panel 5 2.3 Rear panel 5 2.
3 English P ART 1 • English 1.0 INSTR UC TION 1.1 Saf et y Instructions DO NOT INST ALL Y OUR REC EIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
4 P ART 1 • English packaging with its accessories. Failing to comply with such packaging procedures could damage the product and void your warranty.
5 English P ART 1 • English Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB device via your receiver, refer to chapter 7.
6 P ART 1 • English 2. ! To mute the audio outputs 3. RED Flexible functions in OSD menu and Teletext 4. GREEN Flexible functions in OSD menu and Teletext. 5. YELL OW Flexible functions in OSD menu and Teletext. 6. BLUE In viewing mode: Opens the Timer menu for easy setup timers; Flexible functions in OSD menu and Teletext.
7 English P ART 1 • English 2.5 Installing the batt eries Fig. 4 Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries.
8 P ART 1 • English 3.3 C onnecting multiple xed LNBs using a DiSEqC 1.0/1.1 switch Fig. 8 a.: Connect the LNBs of your fixed antenna to the inputs of a DiSEqC 1.0/1.1 switch b.: Connect the output or “to receiver” connector of the DiSEqC 1.0/1.
9 English P ART 1 • English 4.1 Installation 4.1.1 Satellit e Setting Press pq to highlight the satellite your dish is aimed at. When using a multi feed antenna with more than 1 LNB, select the satellites your antenna is adjusted for by pressing the OK button and set the appropriate DiSEqC input for the LNBs Astra 19.
10 P ART 1 • English Via direct access Via the channel list Via the pq buttons Via the button 6.1.1 Direct access To gain direct access to a certain channel, simply enter its number with the 0~9 buttons on the remote control.
11 English P ART 1 • English 6.3 Selection of audio language Some channels support a choice of different audio formats and/or languages. To select another audio stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed.
12 P ART 1 • English Simply press 4 and confirm with OK to start the recording. Default recording time is set to 2:00 hours. If you like to change the duration time of a recording, press 4 and select the duration with tu . During the recording a recording sign will be shown in the channel list.
13 English P ART 1 • English DiSEqC1.2 Move the motor to the right position for locking the signal like explained below. Move Continue: press tu for moving West / East . It will keep moving as long as the button is kept pressed. By pressing once it will move in 1° step.
14 P ART 1 • English Transponder list: Press BLUE to delete a transponder from the list. Press GREEN to delete the selected transponder, select YELL OW to delete all transponders. Confirm deleting with OK or EXIT to cancel. Edit : While in the satellite name list: Press RED Edit to enter the Sat Edit window.
15 English P ART 1 • English progress has been completed, all found channels will be stored and the receiver will switch to the first found channel. 7.1.5 Manual scan - Scanning by transponder Select the options if you want to do a manual scan. (Advanced users.
16 P ART 1 • English A Favourite Type window will pop up on screen. The following 8 groups are available: Music , Sport , Shopping , News , Movie , Talk shows and two personal lists. All types of Favourite List are represented with an icon. Please select one (or more) of them.
17 English P ART 1 • English 4. Press OK to confirm the new position. 5. Repeat the above steps to move more channels. Locking programmes You can lock selected programmes for restricted view. 1. Select the programme you want to lock, and then press the GREEN button.
18 P ART 1 • English Note The 1st time the option is selected, the first possibility is executed, if you select the same option again, the 2nd possibility is executed. (Example: 1st time A-Z/Z-A will yield A-Z order. 2nd time will yield Z-A) 7.2.3 Radio Channel Editor Press MENU and select Channel using the tu buttons.
19 English P ART 1 • English Set Time : Enter the time using tu and the numeric buttons when GMT Usage is set to Off . Sleep Time : Enter the duration the unit should continue running before switching itself off. Select 15 min up to 120 min or Off. Summer Time : Select On or Off depending on the year’s period.
20 P ART 1 • English Auto Switch O Auto Standby is a new, power saving feature that helps you reduce power consumption. It will switch off the receiver when no command is given for the defined period of time. It is set per default to 3 hours. With the tu buttons you can select between different time intervals or Off for disabling the feature.
21 English P ART 1 • English 7.2.5.7 Updat e & Backup Select System then Update & Backup from the main menu and press OK to select. Image upgrade NOTE: The front panel USB port is especially adapted for Software update. The upgrade can be performed with an USB device, preferably an USB pen drive.
22 P ART 1 • English W ARNING A factory reset will permanently delete all your personal settings, timers and stored channels. Please consider this before you perform a factory reset. Others Here you will find some simple convenient items to use. Calendar Find out quickly what day is a certain date.
23 English P ART 1 • English STRONG cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit. With large amounts of data, it may take longer for the system to read the contents of a USB device.
24 P ART 1 • English 7.3.1.2 Music These options available with the RED button: Random: On: Music will be played in a random order. Repeat: All: Repeat at the end of the list.
25 English P ART 1 • English button. A confirmation request message pops up for deleting the selected file(s), select the delete or the cancel option with tu and press OK . In playback mode the following functions and buttons can be used: 1 , OK , 3 , 6 , 5 , 7 , 8 , SUBTITLE , TEXT , AUDIO , , GOTO , 0~9 , STEP , ZOOM + / ZOOM , ! , EXIT .
26 P ART 1 • English (15 min steps) and pq (1 hour steps), you can setup the recording length time and then press 4 again. During the recording you can change the recording length time by pressing 4 . Default Recording Period: You can setup the default recording time period by pressing tu .
27 English P ART 1 • English Satellite dish is too small Trees or buildings in path. Change to a larger dish Change position of dish Signal is too strong, dish is oversized. Connect a signal attenuator to the LNB input. Ask a local satellite specialist for advice.
28 P ART 1 • English Password forgotten Contact local Service Hotline or send email to our support via www.strong.tv 9.0 SPECIFICA TIONS Demodulator Demodulation: QPSK, 8PSK Input symbol rate: DVB-S.
29 English P ART 1 • English Network Connector: Ethernet RJ45 Wired IP setup: Auto (DHCP) and Manual setup. Connectors Ethernet RJ45 SAT IN F-type female SAT OUT F-type female HDMI USB 2.
Ein wichtiger Punkt beim Kauf des Geräts Strong SRT 7004 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Strong SRT 7004 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Strong SRT 7004 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Strong SRT 7004 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Strong SRT 7004 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Strong SRT 7004 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Strong SRT 7004 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Strong SRT 7004. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Strong SRT 7004 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
