Benutzeranleitung / Produktwartung SFCS-16 des Produzenten Stow
Zur Seite of 52
OPERATION AND PARTS MANUAL STOW CONSTRUCTION EQUIPMENT A DIVISION OF MULTIQUIP INC. POST OFFICE BOX 6254 CARSON, CA 90749 310-537-3700 • 888-252-STOW [888-252- 7869] FAX: 310-537-1986 • FAX: 800-556-1986 E-MAIL: stow@multiquip.com • WWW: stowmf g .
.
TABLE OF CONTENTS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 3 STOW SFCS-16 Floor Covering Scrapper Table Of Contents .............................................................................................................. .......
PARTS ORDERING PROCEDURES SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 4 When ordering parts, please supply the following information: Dealer account number Dealer name and addres.
NOTICE TO OPERATORS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 5 IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS MANUAL, PLEASE CONTACT THE FACTORY FOR PROPER ASSISTANCE BEFORE ATTEMPTING TO OPERATE THIS PRODUCT.
NOTICE TO OPERATORS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 6 The concept of electrically powered, walk-behind ty pe floor covering removal equipment has been successfully utilized for many years as a practical so lution to many types of floor covering removal requirements.
OPERATOR INSTRUCTIONAL DATA SHEET SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 7 The following undersigned operators of the FLOOR COVERIN G SCRAPER described and/or pertaining to this Ope.
SAFETY PRECAUTIONS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 8 THE FOLLOWING SAFETY PRECAUTIONS PROVIDE SOME COMMON SENSE GUIDES TO PROMOTE SAFETY AND EFFICIENCY WITH THE FLOOR COVERING SCRAPER.
SAFETY PRECAUTIONS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 9 of back related injuries. Always lift the FLOOR COVERING SCRAPER with leg muscles and not with the back.
SAFETY PRECAUTIONS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 10 personal injury. Keep all body parts, loose clothing and foreign objects clear of the oscillating blade/accessory 5) Start the motor according to the instructions as outlined in this manual to minimize the possibility of unexpected blade/accessory oscillation.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 11 Assembly The STOW SFCS16 FLOOR COVERING SCRAPER is shipped from the factory secured on a specially designed wooden pallet and protected from external damage by a corrugated carton or wood crate.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 12 backwards toward the operator. FIGURE 2. Position the adjustable section at a comfortable height. Reinstall the threaded knobs and tighten until the studs trust up tight against the adjustable handle section.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 13 cutting edge faces down against the surface. FIGURE 4. This configuration allo ws the blade to skim over the surface and minimize any tendency to gouge or dig into the wood.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 14 Flip the blade over for use on wood surfaces. Specific blades are available for removing covering materials from either concrete or wood surfaces. This blade design does not allow it to be flipped over for use on both concrete and wood surfaces.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 15 RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. 1) Properly disconnect the extension cord or the FLOOR COVERING SCRAPER from the power source.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 16 5) Wear proper safety apparel and equipment. Use the T-handled Allen wrench to loosen the button head cap screws which secure the fence plate to the exciter plate.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 17 CAUTION Do not substitute a different fastener type for the button head capscrew configuration. The button head configuration was chosen for operational considerations.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 18 CAUTION Improper knob tension and/or improperly securing the operator handle to the main frame can result in an unstable platform conf iguration. An unstable platform configuration can result in property damage and/or personal injury.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 19 DAMAGE AND/OR PERSONAL INJURY. BLADES ARE PROVIDED WITH A PROTECTIVE COVER OVER THE CUTTING EDGE. EXERCISE EXTREME CAUTION WHEN REMOVING AND/OR REINSTALLING THE PR OTECTIVE COVER.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 20 DANGER DO NOT ATTEMPT TO LIFT THE FLOOR COVERING SCRAPER UP INTO A TRANSPORTATION VEHICLE WITH THE USE OF ONE PERSON ALONE. DO NOT ATTEMPT TO LOWER THE FLOOR COVERING SCRAPER FROM A TRANSPORTATION VEHICLE WITH THE USE OF ONE PERSON ALONE.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 21 DANGER LIFTING, LOWERING AND TRANSPORTI NG THE FLOOR COVERING SCRAPER WITH A BLADE OR CERAMIC TILE RIPPER ATTACHMENT INSTALLED CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 22 5) Providing proper voltage and amperage levels to the electric motor is essential to obtain maximum productivity and service life. Low voltage and amperage levels will cause the motor to overheat.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 23 9) Couple the NEMA L5-15R re ceptacle of the factory supplied extension cord and the NEMA L5-15P plug located on the FLOOR COVERING SCRAPER together. Twist to lock.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 24 1) The FLOOR COVERING SCRAPER utilizes an offset weight design (t ermed the exciter) that moves the blade or ceramic tile ripper attachment with a random orbit oscillation.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 25 RESULTING IN LOSS OF MACHINE CONTROL, PROPERTY DAMAGE AND/OR PERSONAL INJURY. THIS PROCEDURE IS ESPECIALLY IMPORTANT WHEN OPERATING THE FLOOR COVERING SCRAPER ON FLOORS AND/OR SURFACES ABOVE GROUND LEVEL.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 26 blade manufacturing process, but can significantly increase overall productivity rates versus the continued use of a dull blade. Remove the blade from the FLOOR COVERING SCRAPER per the procedures outlined in this manual.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 27 water and/or any other conductive material on the work surface can substant ially increase the potential electrocution concern for the operator and/or associated work personnel.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 28 surface without first stopping the machine to adjust mechanical linkages or bend over to operate a crank lever system. The Back-Saver™ Control System features a crank lever locat ed on the operator console.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 29 8) Part Number SFCS16-1900 Blade can be mounted to the FLOOR COVERING SCRAPER in the offset configuration to allow coverings to be removed from under the kick panel areas of cabinets and other, unaccessible locations.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 30 b) To lubricate the exci ter bearing housing casting. The exciter unit utilizes a sealed type ball bearing. The Zerk® fitting provides lubrication for the self-aligning feature of the bearing unit.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 31 FIGURE 33 ELECTRIC MOTOR SERVICE. The electric motor is capable of operating for many years with a reasonably small amount of maintenance. Before attempting to service the motor, disconnect the FLOOR COVERING SCRAPER from the power supply.
SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 32 TROUBLESHOOTING Troubleshooting ELECTRIC MOTOR. MOTOR FAILS TO START ON/OFF switch in the OFF position. Place switch in the ON position. Thermal protection switch activated. Allow time for motor to cool.
SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 33 STORAGE Storage Proper procedure for long term storage of the FLOOR COVERING SCRAPER will pr otect it against the effects of corrosion and damage.
SPECIFICATIONS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 34 Specifications FRAME STRUCTURE ................................................................................. Unitiz ed, Welded Steel Plate DRIVE SYSTEM ...................
SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 35 NOTE PAGE.
SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 36 EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used.
SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 37 RECOMMENDED SPARE PARTS STOW MODEL SFCS-16 FLOOR COVERING SCRAPER 1 TO 3 UNITS Qty. P/N Description 1 ............ SFCS160320 .........BEARING, 2-BOLT FLANGE S/N 26814 AND BELOW 1 ..........
ADJUSTABLE AXLE ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 38 ADJUSTABLE AXLE ASSY ..
ADJUSTABLE AXLE ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 39 ADJUSTABLE AXLE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFCS160060 AXLE 1 2 SFCS160130 AXLE ARM ASSY.
REPLACEMENT CUTTING BLADES ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 40 REPLACEMENT CUTTING BLADES ASSY ..
REPLACEMENT CUTTING BLADES ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 41 REPLACEMENT CUTTING BLADES ASSY. NO. PART NO. PART NAME QTY.
FRAME ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 42 FRAME ASSY..
FRAME ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 43 FRAME ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFCS160010 FRAME .................................................................................... 1............ S/ N 26814~BE LOW 1 SFCS160011 FRAME .
FRAME ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 44 FRAME ASSY ..
FRAME ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 45 FRAME ASSY. NO. PART NO. PART NAME QTY. REMARKS 20 SFCS87061800 BOLT, CARRIAGE 3/8- 16 UNC X 2-1/4” PLATED 2 21 SFCS55050600 SCREW, BUTTON HEAD 5/16-18 UNC X 3/4” PLATED 2 22 SFCS160311 MOUNT, RUBBER ASSY.
OPERATOR HANDLE ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 46 OPERATOR HANDLE ASSY..
OPERATOR HANDLE ASSY. SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 47 OPERATOR HANDLE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFCS160180 HANDLE, LOWER 1 2 SFCS160160 HANDLE, TOP 1 3 SFCS160140 CRANK ASSY.
DECALS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 48 DECALS.
DECALS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 49 DECALS NO. PART NO. PART NAME QTY. REMARKS 1 DCLSDP DECAL: “STOW LARGE” 1 2 SP85030 DECAL: WARNING 1 3 510164 DECAL: “STOW SMA.
Effective : July 15, 2003 TERMS AND CONDITION OF SALE— PARTS SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 50 PAYMENT TERMS Terms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice.
SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 51 NOTE PAGE.
OPERATION AND PARTS MANUAL STOW CONSTRUCTION EQUIPMENT A DIVISION OF MULTIQUIP INC. POST OFFICE BOX 6254 CARSON, CA 90749 310-537-3700 • 888-252-STOW [888-252- 7869] FAX: 310-537-1986 • FAX: 800-556-1986 E-MAIL: stow@multiquip.com • WWW: stowmfg.
Ein wichtiger Punkt beim Kauf des Geräts Stow SFCS-16 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Stow SFCS-16 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Stow SFCS-16 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Stow SFCS-16 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Stow SFCS-16 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Stow SFCS-16 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Stow SFCS-16 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Stow SFCS-16. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Stow SFCS-16 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
