Benutzeranleitung / Produktwartung SSk-3 des Produzenten Sterling
Zur Seite of 28
Op er ating In struc tions Con veyor Hop per SSK-3 0 1 6 - 3 M S Ster ling Ma te rial Pro cess ing.
Tech ni cal ser vice: Ser vice de part ment Tele phone: (800) 423-3183 Edi tion: 12/97 0 1 6 - 3 M S SSK-3 2 These op er at ing in struc tions are for:* (* Please fill in per son ally) Se ri al num be.
Ster ling Ma te rial Pro cess ing re tains all rights to change the in for ma tion in these op er at ing in struc t ions at any time with out no tice. We as sume no li a bil ity for any er rors or di rect or in di rect dam age re sult ing in con - text with these op er at ing in struc t ions.
Please note that our address and phone i nformation has changed. Please reference this page for updated contact information. These manuals are obsolet e and are provided only for their technical inf ormation , data and capacities.
Tab le of con tents 1. Sa fe ty in struc t ions ............................................5 1.1. War nings and sym bols ..................................6 1.2. Ex pla na tions and in for ma ti on .............................7 1.3. For your sa fe ty .
1. Safety in struc tions » These safety in struc tions ap ply to all per sons within the range of ac tion of the equip ment. Please in form all per sons within the range of ac tion of the equip - ment of the di rect and in di rect haz ards con nected with the equip ment.
1.1. Warn ings and sym bols The fol low ing warn ings and sym bols are used in these op er at ing in struc tions: » This sym bol in di cates dan ger to life! Fa tal or se ri ous in jury is pos si ble if the cor re spond ing in struc tions, reg u la tions or warn - ings are not ob served.
1.2. Ex pla na tions and in for ma tion Var i ous terms and des ig na tions are used fre quently in these op er at ing in struc - tions to en sure clar ity. There fore please note that t he terms used in the text stand for the cor re spond ing ex pla na tions listed be low.
1.3. For your safety · It is absolutely necessary that you observ e the operating instruct ions for the corresponding conveying system. · The device is intended exclusively for conveying plastic granules and regrind. Any other usage is not permitted.
2. In stal la tion in struc tions » These in stal la tion in struc tions are in tended for per sons with skills in elec tri cal and me chan i cal ar eas due to their train ing, ex - pe ri ence and re ceived in struc t ions.
2.1. Trans port For trans port, only the ap pro pri ate lift ing gear should be used (e. g. fork lift or work shop crane). » Ob serve the c ar ry ing ca pac ity of the lift ing gear. Ob serve the s afety in struc tions for the han dling of lift ing gear.
Mount the hop per loader in such a way t hat the out let flap swings in a right- hand an gle to the di rec tion of ma chine move ment. Please check dur ing as sem bly that the ad mis si ble bear ing loads are not ex ceeded. Please check that all con nect ing points are tight to en sure that the con vey ing per - for mance is not im paired.
2.3. Com pressed-air sup ply (only with com pressed-air valves) For op er at ing the con trol valves, a com pressed-air sup ply is nec es - sary. Check com pressed-air pip ing for cor rect in stal la tion and as sem bly. Check fit tings, length and qual ity of the hose con nec tions for agree - ment with re quire ments.
2.4. Elec tri cal con nec tion » The elec tri cal con nec tion may only be car ried out by t rained per - son nel. Other per sons are not per mit ted to carry out t he elec tri cal con - nec tion. The rules of the lo cal elec tric ity board m ust be ob served.
0 1 6 - 3 M S SSK-3 In stal la tion in struc tions 14.
3. Func tional de scrip t ion The con veyor hop per is used for the au to matic con vey ance of fr eely flow ing plas - tic gran ules. The hop per can only func tion in con nec tion with a vac uum con veyor plant. The hop per works with out a fil ter.
4. Main te nance » This chap ter is in tended for per sons with skills in elec tri cal and me chan i cal ar eas due to their train ing, ex pe ri ence and re ceived in struc tions.
L Dis con nect the equip ment f rom mains sup ply be fore st art ing main te nance pro ce dures to en sure that it can not be switched on un in ten tion ally. Depressurize all com pressed air pip ing of the equip ment be - fore start ing main te nance work.
4.1. Main te nance in ter val s Daily: Check warn ing signs on equip ment for good leg i bil ity and com plete ness. With com pressed-air valve: check the oil level in the oiler empty the wa ter sep a ra tor check the op er at ing pres sure in the fac tory ductwork sys tem (max.
4.2. Dis as sem bling the hop per & In di vid ual hop pers can also be main tained dur ing op er a tion. How ever, Ster ling rec om mends that you switch off the con - vey ing plant for all ty pes of work on the hop per. Wait un til the con vey ing pro ce dure has stopped.
Depressurize the com pressed-air line to the hop per (only with com pressed-air valve). Dis as sem ble the ma te rial line on the lat eral in let of the hop per. Re move the con nect ing plug (B) “con veyor con trol” on t he con nec tion hous ing of the hop per.
4.2.1. Re place the seal ing rings Nonreturn valve Open the tog gle-type f as ten ers be - tween the hop per lid and the hop - per loader. Fold the hop per lid up wards. Draw the old seal ing ring off t he noz zle (A). In stall the new seal ing ring. Ob - serve the di rec tion of in stal la tion (B).
Out let flap Draw the old seal ing ring (A) of f the noz zle of the ma te rial out let. In stall the new seal ing ring (A). F Ob serve the di rec tion of in stal la tion (B).
4.2.2. Ad just t he flap switch Re move the con nect ing plug “flap switch” from the con nec tion hous ing of the hop per. Con nect an ohm me ter t o PINS 2 and 3 of the con nect ing plug “flap switch” . Re lease the nuts ( A) of the flap switch (B) un til the sup port can be dis placed.
4.2.3. Cleaning the hop per Open the tog gle-type f as ten ers be - tween the hop per lid and the hop per loader. Fold the hop per lid up wards. Check the sieve within the hop per lid (A) for ma te rial res i due. For clean ing, dis as sem ble the sieve: Pull the sieve out of the seal ing ring.
5. Spare parts list 0 1 6 - 3 M S SSK-3 Spare parts list 25 29253 85610 97704 (Ø 50 mm) 05956 (Ø 40 mm) 84555 28647 29258 17213.
0 1 6 - 3 M S SSK-3 Spare parts list 26 97704 ( Æ 50 mm) 05956 ( Æ 40 mm) 26487 28628 29252 23092 28621 28634 26462 29570 23091 28626 28625.
6. Tech ni cal data 6.1. Di men sion sheet 0 1 6 - 3 M S SSK-3 Tech ni cal data 27.
Ein wichtiger Punkt beim Kauf des Geräts Sterling SSk-3 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sterling SSk-3 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sterling SSk-3 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sterling SSk-3 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sterling SSk-3 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sterling SSk-3 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sterling SSk-3 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sterling SSk-3. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sterling SSk-3 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
