Benutzeranleitung / Produktwartung SV231USBAN des Produzenten StarTech.com
Zur Seite of 29
USB KVM Switch with Audio & Ethernet Hub.
FCC Compliance Statement This equipment has been tested and found to comply with the limits f or a Class B digital device , pursuant to par t 15 of the FCC Rules. These limits are designed to pro vide reasonable protection against harmful interference in a residential installation.
Instruction Manual i Instruction Manual T able of Contents Introduction ................................................................................... 1 Features ....................................................................................
Instruction Manual ii Disable P or t Switching Ke ys ........................................................ 15 Restore Default Settings .............................................................. 15 Inv oke Fir mware Upgr ade Mode ...............
Instruction Manual 1 Introduction Thank you f or purchasing a StarT ech.com USB KVM Switch with Audio and Ethernet Hub. A unique multimedia s witching solution, this multi- function switch integ rates a USB 2.0 hub , Ether net Hub, and audio while suppor ting high-resolution V GA video interfaces.
Instruction Manual 2 Hardware Requirements Console: A VGA, SV GA, or Multisync monitor capable of the highest resolution • that you will be using on an y computer in the installation A standard 1.
Instruction Manual 3 Hardware Guide SV231USBAN/SV431USB AN** Rear Panel Please note that the SV431USBAN rear panel is identical to that of SV231USBAN, with the exception of the n umber of the audio and slav e connection por ts.
Instruction Manual 4 Component Description 1 P or t Selection Switches Pressing a switch brings the f ocus to the computer attached to its corresponding por t. 2 P or t LEDs Upper: KVM DIM ORANGE indicates the computer attached to its corresponding por t is up and running (On Line).
Instruction Manual 5 Hard ware Guide - Cont’ d Component Description 5 Ethernet P ort Section The CA T5 LAN cable that connects to the computer’ s Ether net por t can plug into any av ailable port. 6 Console Audio Jacks The cables from y our microphone and speak- ers plug in here.
Instruction Manual 6 Inst allation T o set up your SV231USBAN/SV431USBAN KVM Switch, ref er to the installation diagram on the f ollowing page, which corresponds with the follo wing steps: Plug your k eyboard, mouse and monitor into the Console P or ts located 1.
Instruction Manual 7 Cable Connection 1 2 3 4 5 6 7 8.
Instruction Manual 8 P ort Numbering Each CPU por t on the SV231USBAN / SV431USBAN switch is assigned a por t number (1 or 2 f or the SV231USBAN; 1 to 4 for the SV431USBAN). The por t numbers are marked on the rear panel of the s witch. The P or t ID of a computer is derived from the CPU port number to which it is connected.
Instruction Manual 9 Operation There are two conv enient methods to switch the KVM, USB hub , and audio focus among the ports: Manual - which inv olves pressing the pushbutton port selection switches located on the unit’ s front panel; and Hotke y - which inv olves entering combinations from the ke yboard.
Instruction Manual 10 Cycling Through the P orts - Cont’ d Going Directly to a P or t [Scroll Loc k] [Scroll Loc k] [K] [Enter] Brings only the KVM focus from the port that currently has it to the next port on the installation. The USB hub and audio f ocus remain where they are .
Instruction Manual 11 [Scroll Loc k] [Scroll Loc k] [n] [K] [U] [Enter] Brings the KVM and USB hub focus to the computer attached to the specified por t. The audio f ocus remains where it is. [Scroll Loc k] [Scroll Loc k] [n] [K] [S] [Enter] Brings the KVM and audio focus to the computer attached to the specified por t.
Instruction Manual 12 T o e xit Auto Scan Mode , press the Esc ke y , the Spacebar , or any P or t Selection switch. Hotk ey Setting Mode (HSM) Invoking Hotk ey Setting Mode Hotke y Setting Mode is used to set up your SV231USBAN / SV431US- BAN switch configur ation.
Instruction Manual 13 With some operations, y ou must exit manually . T o do so, press the Esc ke y , or the Spacebar . Alternate HSM Invocation K eys An alternate set of HSM invocation k eys is pro vided in case the default set conflicts with programs running on the computers.
Instruction Manual 14 can change a por t’ s ke yboard operating platf or m configuration as f ollows: Bring the KVM focus to the port you want to set. 1. Inv oke HSM (see p. 12) 2. Press and release the appropriate Function key (see tab le). After 3.
Instruction Manual 15 USB Reset If the Console USB ke yboard and/or mouse loses focus and needs to be reset, do the follo wing: Inv oke HSM (see p.12). 1. Press and release the F5 function ke y . 2. Hotke y Beeper Control The Beeper can be hotke y toggled On and Off.
Instruction Manual 16 Invok e Firmware Upgrade Mode T o set the SV231USBAN / SV431USBAN to Fir mware Upgrade Mode , do the follo wing: Inv oke HSM (see p.12). 1. K ey in: upgrade 2. Press [Enter]. 3. The front panel por t LEDs flash to indicate Fir mware Upgr ade Mode is in effect.
Instruction Manual 17 Ke yboard Emulation Mac Keyboard The PC compatible (101/104 k ey) k eyboard can emulate the functions of the Mac ke yboard. The emulation mappings are listed in the table belo w: Please Note: When using ke y combinations, press and release the first ke y (Ctrl), then press and release the activation ke y .
Instruction Manual 18 Sun Keyboard The PC compatible (101/104 k ey) k eyboard can emulate the functions of the Sun ke yboard when the Control ke y [Ctrl] is used in conjunction with other ke ys.
Instruction Manual 19 The Firmware Upgrade Utility The Windows-based Firmware Upgrade Utility (FWUpg rade.e xe) pro vides a smooth, automated process for upg rading the KVM s witch’ s firmware. The Utility comes as par t of a Fir mware Upgr ade P ackage that is specific for each de vice.
Instruction Manual 20 Starting the Upgrade T o upgrade your firmware: Run the downloaded Firmware Upgrade P ackage file - either by 1. doubleclic king the file icon, or by opening a command line and entering the full path to it.
Instruction Manual 21 After you ha ve made your de vice selection(s), Click 3. Next to perf or m the upgrade . If you enab led Check Firmware V ersion, the Utility compares the • device’ s fir mware lev el with that of the upgrade files.
Instruction Manual 22 Upgrade Succeeded After the upgrade has completed, a screen appears to inf or m you that the procedure was successful: Click Finish to close the Firmware Upgrade Utility . After a successful completion, the switch e xits Fir mware Upgrade Mode and resets itself.
Instruction Manual 23 Specications Function SV231USBAN SV431USBAN Computer Connections 2 4 KVM P ort Selection F ront Panel Switches; Hotke y USB/Audio P ort Selection Hotke y Console Connectors Ke.
Instruction Manual 24 Function SV231USBAN SV431USBAN KB/Mouse Emulation USB (PC, Mac , Sun) Video Up to 2048 x 1536; DDC2B Scan Interval 1 - 99 secs. (5 secs. default) P ower Consumption DC5.3V ; 4.5W; 900mA DC5.3V ; 5W; 1000mA P ower Adapter 1 x DC 5.
Instruction Manual 25 T echnical Suppor t StarT ech.com’s lifetime technical suppor t is an integr al par t of our commit- ment to pro vide industry-leading solutions. If y ou ev er need help with y our product, visit www .star tech.com/suppor t and access our comprehensive selection of online tools, documentation, and downloads .
Ein wichtiger Punkt beim Kauf des Geräts StarTech.com SV231USBAN (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie StarTech.com SV231USBAN noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für StarTech.com SV231USBAN - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von StarTech.com SV231USBAN reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über StarTech.com SV231USBAN erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon StarTech.com SV231USBAN besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von StarTech.com SV231USBAN verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit StarTech.com SV231USBAN. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei StarTech.com SV231USBAN gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
