Benutzeranleitung / Produktwartung RM.404 des Produzenten Stanton
Zur Seite of 22
RM.404 Professional DJ Mixer ST ANTON MAGNETICS, Inc. information@stantondj.com ©2004 Stanton Magnetics, Inc. OWNER’S M A N U A L.
Please read carefully before use of this product Failure to follow the instructions printed below may void warranty • Follow all security advice printed on your mixer • When removing the unit&apos.
Congratulations and thank-you for purchasing the latest addition to the grow- ing Stanton family . Sporting a new attitude, and a fresh, modern look, the RM.404 is a 4-channel, rackmount mixer loaded with features and innova- tions giving club and mobile DJs a powerful, yet simple tool to mix, create, and perform their best.
The controls and functions of the RM.404 are grouped in alphabetical sec- tions (clockwise from upper right corner) for your reference and then listed numerically for more detail.
RM.404 T op Panel (FUNCTIONS) Section A: Output Meters 1. Meter Switch: Switches the display of the Level Meter (#2) between Master or Zone output signals. 2. Level Meter: Displays the left and right Master or Zone output level of the mixer . Red indicates clipping.
RM.404 T op Panel (FUNCTIONS) Section B: Output Controls 3. Master Level: Controls the overall output level of the audio signal sent through the Master connectors (see Output Connections.) 4. Stereo/Mono Switch: Switches the Master output between a stereo or mono signal.
RM.404 T op Panel (FUNCTIONS) Section C: Cue Controls 7. Split Cue: Controls how the CUE will be heard in the headphones. In the "stereo" position, the pre-selected Cue (#29) will be heard as a stereo signal in the head- phones (full stereo audio signal in both ears.
RM.404 T op Panel (FUNCTIONS) Section D: Crossfader Controls 12. Fader Start (A): Activates this side (A) of the Crossfader (#13) for use with components with the Fader Start feature. Moving the crossfader away from the left-most position will cause the device (CD / T urntable) to start play- ing.
RM.404 T op Panel (FUNCTIONS) Section E: MP3/Aux In 15. MP3 / Aux. Input: This 1/8" Mini-jack (3.5 mm) input was designed for easy access and connectivity to a variety of portable devices (portable MP3 / mini-disc / CD players / iPods.) Use this input instead of having to re-wire the back panel of the mixer or use adapters.
Section F: Mic Controls (continued) 16. Mic-1 XLR Input: Primary connection for a standard balanced (XLR) microphone. 17. Mic-1 1/4" Input: Primary connection for a standard unbalanced (1/4") microphone. 18. Mic Level: Controls the output level (volume) of Microphone 1 only (both connections.
RM.404 T op Panel (FUNCTIONS) Section G: Channel Controls 23. Input selector switch: Selects phono or line input for the corresponding channel. This is a three way switch allowing input from only one device at a time (Phono or either of two Line level inputs (for connections in rear panel of mixer see Sections L-O.
RM.404 T op Panel (FUNCTIONS) Section G: Channel Controls (continued) this setting too high may result in a loss of sound quality (distortion.) [Note: For best results set this control in the number 7 (2 O'Clock) position for unity gain. If further adjustment is needed, this is a good reference point.
RM.404 Rear Panel (FUNCTIONS) Section H: Power Section I: Master Output Section J: Zone Output Section K: RCA Outputs Section L: Channel 4 Inputs Section M: Channel 3 Inputs Section N: Channel 2 Inputs Section O: Channel 1 Inputs Section H: Power H. Power Switch & Connection: This is the ON/OFF power switch for the entire mixer .
RM.404 Rear Panel (FUNCTIONS) Section I: Master Output I. Master Output Connection: These Right & Left XLR connections are used for the Master Output signal. V olume levels for this output are controlled by the section B front panel controls. NOTE: The TRIM knob sets the maximum volume allowed for this output (be sure it is set properly .
RM.404 Rear Panel (FUNCTIONS) Section L: Channel 4 Inputs L. Channel 4 Input Connections: This group of connections are ALL inputs which are only routed to Channel 4 (select input using section G, (#23) from top panel.
RM.404 Rear Panel (FUNCTIONS) O. Channel 1 Input Connections: This group of connections are ALL inputs which are only routed to Channel 1 (select input using section G, (#23) from top panel).
This is a typical setup you’ll find in many nightclubs: 2 turntables, 2 CD play- ers, plus a microphone for the DJ. Here’s how you would set up your equip- ment with the RM.404: 1. Be sure all equipment is powered “OFF” and all of the RM.404’s Channel faders and Level knobs are at minimum volume.
Superior Sound T echnology The audio quality of the RM.404 is nothing short of revolutionary for DJ mix- ers in its price class. The RM.404 was designed by Stanton’ s new product development team, s.
T echnical Specifications Line Inputs.................................................................................7 x 2 (RCA) , -10 dBV / >10 kOhm 1 (1/8” stereo mini-jack), 10 dBV / >10kOhm Phono / CD Inputs...............................
T roubleshooting Problem / Symptom Possible Cause/ Solution No Sound Is the power on? Check the power switch. Make sure the channels are assigned properly to the crossfaders. Make sure INPUT GAIN is turned up and output level control is turned up. Depending on the input, check the rear panel selector switches.
T roubleshooting Sound is distorted Phono Input Only plug turntables into this input, do not plug in CD players or other Line Level sources. T urn down the INPUT GAIN CONTROL I hear hum. Make sure you are using good shielded audio cables. Some less expensive audio cables can be susceptible to hum and interference.
Stanton Magnetics, Inc. – W arranty Provision – Returns for Repairs or Replacement W arranty Through Stanton’s authorized dealers around the W orld, Stanton, or one of Stanton’s authorized dis- tributors outside the U.
Ein wichtiger Punkt beim Kauf des Geräts Stanton RM.404 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Stanton RM.404 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Stanton RM.404 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Stanton RM.404 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Stanton RM.404 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Stanton RM.404 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Stanton RM.404 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Stanton RM.404. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Stanton RM.404 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
