Benutzeranleitung / Produktwartung KV-V1430P des Produzenten Sony
Zur Seite of 36
© 1995 by Sony Corporation Printed in Spain 3-858-249- 11 (1) Operating Instructions KV -V1430K/P KV -V2110K/P PAL NTSC 4.43 T rinitr on Colour V ideo TV GB.
2 Getting Started W ARNIN G Pr ecautions To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the set. Do not open the cabinet. Refer servicing to qualified personnel only. Caution Television programmes, films, video tapes and other materials may be copyrighted.
Getting Started 3 GB Contents Getting Started Step 1—Preparation ................................................... 4 Checking the supplied accessories ....................... 4 Inserting batteries into the Remote Commander ........................
4 Getting Started Getting Started Step 1 — Pr eparation Checking the Supplied Accessories When you have taken everything out of the carton, check that you have these items: • Remote Commander • .
Getting Started 5 GB Connecting an Outdoor Aerial For better TV reception and recording with clear video picture, connect an outdoor aerial to your video TV. T o connect a VHF aerial or a combination VHF/UHF aerial—75-ohm coaxial cable (r ound) Attach an IEC aerial connector to 75-ohm coaxial cable.
6 Getting Started You should preset the channels (up to 60 channels) by choosing either the automatic or manual method. The automatic method is easier if you want to preset all receivable channels at once. Use the manual method if you want to allocate programme numbers to the channels one by one.
Getting Started 7 GB Pr esetting Channels Automatically 1 Press MENU to display the main menu. 2 Move the cursor ( z ) to “PROGRAMME PRESET” with + ◊ or – √ and press OK. The PROGRAMME PRESET menu appears. 3 Move the cursor ( z ) to “AUTO PROGRAMME” with + ◊ or – √ and press OK.
8 Getting Started For programme positions beyond 2 The display scrolls by pressing – √ repeatedly. If you have made a mistake Press ? to go back to the previous position. Pr esetting Channels Manually 1 Press MENU to display the main menu. 2 Move the cursor ( z ) to “PROGRAMME PRESET” with + ◊ or – √ and press OK.
Getting Started 9 GB Skipping Programme Positions You can skip unused programme positions when selecting programme with PROGR +/– buttons. However, the skipped programmes may still be called up when you select them with the number buttons. 1 Press MENU to display the main menu.
10 Getting Started Captioning a TV Station Name You can name a channel using up to five characters (letters or numbers) to be displayed on the TV screen (e.g. MTV). Using this function, you can easily identify which channel you are watching. 1 Press MENU to display the main menu.
Getting Started 11 GB Manual Fine-T uning Normally, the automatic fine-tuning (AFT) is already working. However, if the picture of a programme is distorted, you can use the manual fine- tuning function to obtain better picture reception. 1 Press MENU to display the main menu.
12 Getting Started You need to set the clock for using timer recording and quick-timer recording functions. 1 Press MENU to display the main menu. 2 Move the cursor ( z ) to “CLOCK SET” with + ◊ or – √ and press OK. The CLOCK SET menu appears.
Basic Operations 13 GB Basic Operations W atching the TV This section explains the basic functions you use while watching the TV. Most of the operations can be done using the Remote Commander. Switching the TV On and Off Switching on Press ; , PROGR +/– or number buttons on the Remote Commander, or PROGR+/– on the video TV.
14 Basic Operations Muting the Sound Press ¤ . The ¤ indicator appears and stays on the screen. To resume normal sound, press ¤ again or Á +. Displaying the On-scr een Information Press e to display the following on-screen information. To have the programme number and caption stay on the screen, press e again.
Basic Operations 15 GB 4 Press MENU to go back to the original screen. Adjusting the pictur e displayed on the screen 1 Press MENU to display the main menu. 2 Move the cursor ( z ) to VISUAL MODE with + ◊ or – √ and press OK. The VISUAL MODE menu appears.
16 Basic Operations W atching Line Input Press … repeatedly until the desired input indicator appears. To go back to the normal TV picture, press … until the programme position appears, or press ; on the Remote Commander once. For details of the video input picture, see page 30.
Basic Operations 17 GB This section shows you how to insert a cassette and to play it. More convenient functions you can use while playing a tape is shown in “Additional Operations” from page 26. Inserting a Video Cassette 1 Press ; , PROGR +/– or number buttons on the Remote Commander, or PROGR +/– on the video TV.
18 Basic Operations Playing a T ape 1 Press ; , PROGR +/– or number buttons on the Remote Commander, or PROGR +/– on the video TV when the u lamp is lit in red. 2 Insert a cassette. If you insert a cassette with its safety tab removed, playback starts automatically.
Basic Operations 19 GB 4.12M O N E 2:05:10 S E S 20:00 Playing a T ape Repeatedly (Auto Repeat) You can play the recorded portion of the tape repeatedly. Set the AUTO REPEAT switch on the video TV to ON, and press PLAY · . Playback starts. When the tape reaches the end, the video TV rewinds the tape to the beginning, then plays it.
20 Basic Operations Recor ding TV Pr ogrammes Recor ding TV Programmes 1 Press ; , PROGR +/– or number buttons on the Remote Commander, or PROGR +/– on the video TV when the u lamp is lit in red. 2 Insert a cassette with a safety tab. 3 Select the programme position with PROGR+/–.
Basic Operations 21 GB Recor ding TV Pr ogrammes Using the Timer The Timer Recording function allows you to preset your video TV to record up to six programmes within a one-month period. Before you begin • Press ; , PROGR +/– or number buttons on the Remote Commander, or PROGR +/– on the video TV to switch on the video TV.
22 Basic Operations 5 Press OK, then set the minute of the recording start time to “15” with + ◊ or – √ . 6 Press OK, then set the hour of the recording stop time to “21” with + ◊ or – √ . 7 Press OK, then set the minute of the recording stop time to “55” with + ◊ or – √ .
23 Basic Operations GB Daily/weekly r ecording You can preset your video TV to record the same programme every day of the week (daily recording) or the same programme on the same day every week (weekly recording). Press – √ in step 3 until the desired setting appears in the “DATE” position.
24 Basic Operations Checking the Timer Settings You can display the list of the timer settings which you preset. Press TIMER ON SCREEN. The PROGRAMME LIST appears. Press TIMER ON SCREEN again to erase the PROGRAMME LIST. Changing or Canceling the Timer Settings 1 Press TIMER REC ON/OFF to turn off the TIMER REC lamp on the front of the video TV.
25 Basic Operations GB Recording Using the Quick-Timer You can preset your video TV to start timer recording immediately and to automatically stop recording after a specific time period. If you have not set the clock, quick-timer recording cannot be done.
Additional Operations 26 Additional Operations Switching of f Automatically — Sleep Timer You can automatically switches the video TV into standby mode after a selected time period.
27 Additional Operations GB Switching on at Y our Desir ed T ime — On Timer You can preset your video TV to automatically switch on at a desired time. You can select the TV programme or video playback to be switched on. 1 Press MENU to display the main menu.
28 Additional Operations Adjusting the T racking Adjusting the T racking Automatically The tracking condition is automatically adjusted on this video TV. The AUTO TRACKING indicator will appear while the video TV is searching for best tracking condition.
29 Additional Operations GB Adjusting with the Optimum Pictur e Control (OPC) This function allows you to improve playback and recording quality by adjusting the system parameter automatically according to the condition of the video tape. This function is set to ON at the factory.
30 Additional Operations Connecting Optional Equipment W atching the Picture Input fr om Optional Equipment T o watch the video input signal Press … repeatedly until the desired input indicator appears on the screen.
31 Additional Information GB Function TV reception Clock and timer Playback Possible causes and remedies • The mains lead is disconnected. / Connect the mains lead. • The video TV is switched off. / Press ; , PROGR +/– or programme number on the Remote Commander, or PROGR +/– on the video TV.
32 Additional Information Problems The cassette is ejected when you press REC r . Recording cannot be done. Timer settings cannot be made. The cassette is ejected when you press TIMER REC ON/ OFF. The TIMER REC lamp does not light up even though you press TIMER REC ON/OFF.
33 Additional Information GB W or n V ideo Heads If your video TV displays a poor picture after you clean the video heads, you may need to replace them. Consult your dealer or the Sony Service Center nearest you. Check the V ideo Heads after 1,000 Hours of Use A video TV is a high precision machine.
34 Additional Information Output EURO-AV: 21-pin Headphones jack Monaural minijack General Clock Quartz locked Power back up Approx. 1 day or less Power requirements 230 V AC, 50 Hz Power consumption .
35 Additional Information GB Video TV Set—Fr ont This section briefly describes the buttons and controls on the video TV set and on the Remote Commander.
36 Additional Information Remote Commander 1 ¤ (muting) button (page 14) 2 6 (eject)button (page 17) 3 … (input select) button (pages 16, 30) 4 Number button (page 6, 13) 5 ON TIMER button (page 27.
Ein wichtiger Punkt beim Kauf des Geräts Sony KV-V1430P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony KV-V1430P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony KV-V1430P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony KV-V1430P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony KV-V1430P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony KV-V1430P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony KV-V1430P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony KV-V1430P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony KV-V1430P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
