Benutzeranleitung / Produktwartung FD Trinitron KV-29CL10B des Produzenten Sony
Zur Seite of 22
R 4-093-786- 51 ( 1 ) FD Trinitron Colour Television KV-29CL10B © 2003 by Sony Corporation Instruction Manual GB 00COKV29CL10B.fm Page 1 Friday, January 17, 2003 6:16 PM.
2 NOTICE FOR CUSTOMERS A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e. marked with 2 or @ ) must be used.
3 GB Introduction Thank you for choosing this Sony FD Trinitron Colour Television. Before operating the TV, please read this manual thoroughly and retain it for future reference. • Symbols used in the manual: Table of Contents Notice for Customers .
4 Safety Information Do not open the cabinet and the rear cover of the TV . Refer to qualified service personnel only . T o prevent fir e or shock hazard, do not expose the TV to rain or moisture. For your own safety , do not touch any part of the TV , power lead or aerial lead during lightning storms.
5 GB Overview of Remote Control Buttons Overview 1 To Temporarily Switch Off TV: Press to temporarily switch off TV (the standby indicator on TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use.
6 Overview of TV Buttons Overview On/Off switch Standby indicator Programme Up or Down Buttons (Selects TV channels) Volume control buttons Video Input jack Audio Input jacks Headphones jack Auto Start Up Button Selecting Input source Push up the flap on the front of the TV to reveral the front control panel.
7 GB Connecting the Aerial and VCR Connecting cables are not supplied. Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way.
8 Language Select Language: i 4 Svenska Norsk English Nederlands Français Italiano i $ OK Country Select country: i 4 Sverige Norge - Italia Deutschland Österreich i $ OK If picture slants, plea.
9 GB Your TV is now ready for use 5 The Auto Tuning menu appears on the screen. Press the OK button to select Yes . 6 The TV starts to automatically search and store all available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed.
10 Introducing and Using the Menu System Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: 1 Press the MENU button to switch the first level menu on. 2 • To highlight the desired menu or option, press or .
11 GB SOUND ADJUSTMENT The “Sound Adjustment” menu allows you to alter the sound adjustments. To do this: after selecting the item you want to alter, press , then press / / or repeatedly to adjust it and finally press OK to store the new adjustment.
12 SLEEP TIMER The “Sleep Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press , then press or to set the time period delay (max.
13 GB continued... PROGRAMME LABELS The “Programme Labels” option in the “Set Up” menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the channel you wish to name.
14 continued... MANUAL PROGRAMME PRESET The “Manual Programme Preset” option in the “Set Up” menu allows you to: a) Preset channels or a video input source one by one to the programme order of your choice. To do this: 1 After selecting the ”Manual Programme Preset” option, press then with Programme option highlighted press .
15 GB Menu System NOISE REDUCTION The “Noise Reduction” option in the “Detail Set Up” menu allows you to automatically reduce the picture noise visible in the broasdcast signal. To do this: after selecting the option, press . Then press or to select Auto .
16 Menu System RGB CENTRING When connecting an RGB source, such as a “PlayStation”, you may need to readjust the horizontal position of the picture. In that case, you can readjust it through the “RGB Centring” option in the “Detail Set Up”.
17 GB Teletext Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100) gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below.
18 Connecting Optional Equipment Using the following instructions you can connect a wide range of optional equipment to your TV set. (Connecting cables are not supplied). Connecting a VCR: To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual.
19 GB Using Optional Equipment 1 Connect your equipment to the designated TV socket, as indicated in the previous page. 2 Switch on the connected equipment. 3 To watch the picture of the connected equipment, press the button repeatedly until the correct input symbol appears on the screen.
20 Specifications Additional Information TV system: Depending on your country selection: B/G/H, D/K, L, I Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 Picture Tube: Flat Display FD Trinitron 29” (approx.
21 GB Troubleshooting Here are some simple solutions to the problems which may affect the picture and sound. Additional Information Problem No picture (screen is dark) and no sound. Poor or no picture (screen is dark), but good sound. No picture or no menu information from equipment connected to the Scart connector.
http://www.sony.net/ Printed in Spain Ecological Paper - Totally Chlorine Free 03BCKV29CL10B.fm Page 1 Friday, January 17, 2003 6:18 PM.
Ein wichtiger Punkt beim Kauf des Geräts Sony FD Trinitron KV-29CL10B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony FD Trinitron KV-29CL10B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony FD Trinitron KV-29CL10B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony FD Trinitron KV-29CL10B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony FD Trinitron KV-29CL10B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony FD Trinitron KV-29CL10B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony FD Trinitron KV-29CL10B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony FD Trinitron KV-29CL10B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony FD Trinitron KV-29CL10B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
